I charge mi ipod, put it away and 48 hours later it's dead. I have installed a new battery but that did not resolve it. I find that if i plug in a cable to it, leaving the other end open, it will hold a charge.

My ipod won't hold a charge, it dies overnight. I replaced the battery. The only thing that helps is inserting any cable in the ipod and leaving the other end open. It will then hold a charge.

I really don't know what else that you can try now other than to restore your iPad. Restoring the iOS software might fix the issue, but there are a couple of things that you should know.
You will lose everything on your iPad because I am under the assumption that you have never backed up or you don't back up often. Otherwise, you wouldn't be worried about losing what you have on the iPad because you could restore from the backup.
To follow up on that, there is no way to backup now if the iPad is unresponsive. You cannot transfer the contents of the device if you can't power it up.
You can download most of your paid content again for free as long as you use the same Apple ID and as long as the content is still available. However, you will lose all of your app data.
Read this for more information, but number 5 is what will apply to your situation.
iOS: Not responding or does not turn on - Support - Apple

Similar Messages

I have a early 2008 Macbook pro and just bought a new battery, but it is not holding a charge

I have a late 2008 Macbook pro and just bought a new battery, but it is not holding a charge. I read it may be the charger,
that sometimes is blank, but it does charge my computer.
Anything I can try?
I have updated to 10.9.2
Message was edited by: wplewis

Bring it back to the Apple store with your MBP and charger. If the battery is found to be defective, they should provide you with a replacement (assuming you are in the warranty period).
Ciao.

Hey guys what is the best way to retrieve my password on a mac?? I need to install a new software but it would not let me because i can't remember my password

hey guys what is the best way to retrieve my password on a mac?? I need to install a new software but it would not let me because i can't remember my password. what a pain ;-((
Any suggestion would be greatly appreciated

Resetting or changing a password:
For Snow Leopard or earlier: http://support.apple.com/kb/HT1274

The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.

The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.

Probably a setting. Look at the manual.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Songs have disappeared from my library and Ipod. I have found some in trash but I did not send them there. Others have completely gone.

Hi - I have discovered that some songs have disappeared from my itunes library and Ipod. I have found some of them in trash even though I did not trash them, as they are some of my all time favourite songs. I have now restored these trashed songs to my library/ipod.
However I cannot find some other missing songs in trash - so I have no idea where they could be! It makes me feel very insecure about itunes as a whole. I would prefer music to diamionds - and it disturbs me when music just disappears like that! An explanation/solution would be gratefully received. I wonder whether I can ask Apple to pay for the items that have gone for good!

Andrea,
have you tried to update the Ipod? If not try that, but do not restore it. If you still cannot find the songs, there is - I suppose you are using windows - a nifty little program available from Findley Designs (www.findleydesigns.com) that allows you to transfer Music from your Ipod to your PC. Download it and see if it works with one song, if it does it is about USD 14 to buy and helps if you want to transfer songs from your Ipod to your computer. If you have transferred the music to your computer you can restore your Ipod-
Good luck
Thomas

Installed a new battery but there is a black X on the battery icon

My battery my Early 2011 MacBook Pro was expanding so I bought a new battery and replaced it myself.
I turned my MacBook Pro on and it works, but there is a black X on the battery icon. When I check the battery information on the System Profiler, it says there is no battery installed, BUT, when I press ALT and click on the battery icon in the top right corner, it says "Condition: Normal".
Can someone tell me why this is happening and what I can do to fix this?

Thank you BUT this would be for a completely different Mac. My MacBook Pro is the type where there is no removable battery on the outside. I had to open mine up to change the battery.
I bought the new battery on eBay and am going to get it resolved with the seller, and if he doesn't refund me or replace it, then I will claim the eBay Money Back Guarantee.
Hopefully someone has advice for me still.

Close one CMD window leave the other one open

I have two CMD windows open runnig a LabVew launched commandline program
It is two instances of the iperf program and I found this searching here
taskkill /F /IM iperf.exe
That works but it kill both windows.
I take it I need to find the PID on the two windows and only kill the one I want
How do I find the PID?
Is there a better way?

RTSLVU wrote:
chembo wrote:
You can change the title of the command line windows with the TITLE command, i.e. TITLE mycmd_task1 or TITLE mycmd_123.
Now taskkill /FI "windowtitle eq mycmd_task1" will kill the first window, etc...
I tried this without LabVIEW, just 2 command line windows named 'win1' and 'win2'. It works. Only one of the instances cancels execution. Since the name of the program adds also to the title it is easier to use wildcard in the filter. When you run 'iperf ' the window title will be 'win1 - iperf -c ..........', so you can use taskkill /FI "windowtitle eq win1*" respectively taskkill /FI "windowtitle eq win2*"
That does not seem to work.
The title has C:\Windows\system32\cmd.exe - C:\iperf\iperf -s -u -p50002 -i2 -l300M
Taskkill /F /IM "C:\Windows\system32\cmd.exe - C:\iperf\iperf -s -u -p50002 -i2 -l300M"
ERROR: Invalid query
As does Taskkill /F /IM "cmd.exe - C:\iperf\iperf -s -u -p50002 -i2 -l300M"
and Taskkill /F /IM "C:\iperf\iperf -s -u -p50002 -i2 -l300M"
Oh... I see you were using the FI argument
Taskkill /FI "C:\Windows\system32\cmd.exe - C:\iperf\iperf -s -u -p50002 -i2 -l300M" and every other variation yelds:
ERROR: The search filter cannot be recognized

My ipod will not sync with itunes. The computer says its there but itunes does not. I've tried everything suggested. I keep getting an error message at the very end.

Here is the error message I get.
When iTunes does install, my ipod still won't sync because it's the wrong version. I've tried doing the version it suggests and still nothing.

Refer this article to fix your Registry error.:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Refer this article for Device not recognize in iTunes:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

Downloaded iOs 5.0.1 but songs did not restore to my phone. Tried to synch to iTunes today and it prompted me to "restore" my phone again. Did that but songs did not restore. Each time I try to synch, it prompts me to restore with the same result. Help!

When I first downloaded iOS 5.0.1 on Monday night I received an error message (I didn't capture it, sorry). So I re-attempted. After downloading and restoring my phone from backup, it prompted me again to restore my phone. I complied. And it prompted me to restore my phone from the backup again. I tried it again with the same result. Finally frustrated I stopped.
I didn't realize until the next day that my music was empty on the phone. I tried to synch today to get my songs back on the phone and instead it AGAIN asked me to restore my phone from the backup. I complied but my music is still missing. I need help!
Please note I am using iTunes as the backup storage on my PC, I haven't turned on iCloud because I don't have wireless service in my home.
I am soooo frustrated right now. I need my music to go running in the morning.
Any tips would be greatly appreciated!

Make sure iTunes is up to date and try again.

I have 2 ipod touch 4th generation and i tried to sync these i had to download a new itunes but no sync button is highlighted i am unable to download anything or sync either of these ipods . It says click summary i do nothing happens

I am unable to sync my ipod touch 4 th generation. Itunes advised me to download updated version of itunes. I did. But nothing works no syn button is highlighted and summary button does not bring anything up. can someone help.

I disabled all my computer's firewalls and sure enough, IT WORKED!! My iPod is updated and just now finishing restoring! Thank you SOOOO SOOO much. : D

I need to buy a new battery but that battery isn't on the shopping website.

1. Product Name and Number
HP G62-359CA Notebook PC
2. Operating System installed (if applicable
Microsoft Windows 7 Home Premium 64-Bit
Processor Intel(R) Pentium(R) CPU P6100 @ 2.00GHz, 1999 Mhz, 2 Core(s), 2 Logical Processor(s)
3. Error message (if any)
Battery power level low
4. Any changes made to your system before the issue occurred
None
5. In the subject title, include a brief, specific description of the problem, and your product information (i.e., product name of your laptop, notebook, printer, other device, etc.)
My laptop battery life is horrible. Ive researched a bit and it seems like everyone with the same laptop as me is having the exact same sort of problem. I got the laptop in the fall of 2010. Im looking on the hpshopping.ca site and im not finding any other replacement parts for this laptop. And i am young and i do not have a job yet so i am unable to buy a brand new laptop. So does anybody else know where i could buy a new replacement battery for my laptop? Thanks!
This question was solved.
View Solution.

Hi:
According to the service manual for your notebook at the link below you have the choice of 2 batteries.
Please see chapter 3, page 3-8, item 16. Part # 593554-001 would give you more time between charges.
http://h10032.www1.hp.com/ctg/Manual/c02542455.pdf
You can order either one at the link below.
http://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=898770C04DED4DA28D5C1F34CBF9EA5D
Paul

Cannot send or recieve emails in outlook2007 i tried repair and set up a new account but it did not wokk

how do i fix this problem i keep geting cannot log in to server

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support <br/> Read the Subscriptions <a href="http://blogs.msdn.com/msdnsubscriptions">Blog! </a>

TS3274 my ipad has a black screen and the apple logo and won't do anything else. I have tried to reset it but to no avail.

My ipad has a black screen and the apple logo and won't do anything else. I have tried to reset to no avail.

Try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

I am having a problem moving files from a iMac in location mac in another location. I have tried using Dropbox and the Public folder in the i disc. When I drag the files into dropbox they become alias' and I can't open them at the other end beca

I am having a problem moving files from an imac in one location to an imac inanother location. I have tried using Dropbox which is installed in both locations but when i drad a file ino yhe app it becomes an alias. When I get to the other location it says I can't open the file because the " original application that created it is not present". This is despite the fact that the app that created both files is installed in both computers. If I use the Public folder in the idisc, when I get to the other location the file isn't there. Am I forgetting to turn something on or off? Should I manually sync the Public folder and if so how? Thanks
Message was edited by: stephenfromdelray beach

So now that's two of us. Hopefully, someone has an answer.

TS3274 How to change my App Store to another country? I synced my IPad with computer but it did not change the store.

My iPad changed the country on the App Store by accident . How can I change the country on my App Store back to the original store??
I tried syncing on my computer but it did not work

Hi Briopp,
If yor are needing to change your iTunes country on your iPad:
Settings>iTunes & App Store> you will see yor Use ID - tap on that. You will see a dropdown and in that dropdown, View Account. Select View Account. There you wll see a section called Counry/Region. Click on that and follow the instructions to select a different country.
Hope this helps!
Cheers,
GB

I charge mi ipod, put it away and 48 hours later it's dead. I have installed a new battery but that did not resolve it. I find that if i plug in a cable to it, leaving the other end open, it will hold a charge.

Similar Messages

Maybe you are looking for