I click on "add to library" and the file shows up in my iTunes media file, but not in my iTunes.

I click on "add to library" and the file shows up in my iTunes media file, but not in my iTunes.

That didn't work - I'm so confused - it just doesn't make sense.  How could it be there, but not show up on itunes???

Similar Messages

  • I have an issue with Add to iTunes folder incorporating mp3s in iTunes Media folder, but not into my iTunes library.

    I am using iTunes 10.5 on Windows 7 (64bit).  This has only started happening since the 10.5 update.  When I add mp3s to "Add to iTunes" folder, the mp3s will be added to a folder within the iTunes Media\Music\ directory, but the song will not show up in my iTunes library.  If I open the mp3 from its location in the directory, it will open in iTunes and be included in the Library go forward.   This issue is not consistent, it has happened the first time I tried to add an mp3, and not the second that I tried to add the exact same file.  Oh also, I have always had the option selected to allow iTunes to keep the media folder organized.
    For the time being I have to keep a list of everything I am adding and verify whether it shows up in the library.  If it doesn't I have to run a search to see what exact directory path iTunes put it in, go there and open the file - frustrating and time consuming.  Even more frustrating to me however is that I really don;t know if I have recovered all the added mp3s from before I recognized the problem.
    Any ideas?  I was wondering if there maybe was a way to have iTunes refresh its library from the folder? 

    Back up all data immediately as your boot drive may be failing.
    If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

  • I am a long time iTunes user but a new MacBook owner! :) I keep the majority of my music files on an external hard drive.   I'm trying to view all those files on my MacBook through iTunes.   With windows you would go to : File/Add To Library, and iTunes w

    I am a long time iTunes user but a new MacBook owner! I keep the majority of my music files on an external hard drive.   I'm trying to view all those files on my MacBook through iTunes.   With windows you would go to : File/Add To Library, and iTunes would add all your selected files to your music library BUT WOULD NOT COPY THEM TO YOUR HARD DRIVE.  In other words, if the external hard drive was connected, you could listen, drag/drop, and edit the files.   When I tried the same thing with my new MacBook... it actually started coping the files to my MacBook harddrive.  I don't want that, it's millions and millions of mp3's that I don't want to keep on my computer, only my external hard drive.   Can anyone help?    I'm sure it's something easy, I'm just so new to the Mac world.   Being an iPhone owner for many many years I'm picking up things fast, but this is getting the best of me!  Help !

    In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

  • ITunes won't show the CD in the library and won't show song titles

    Finally, after about 6 hours I was able to download the new version of iTunes for my daughter's Nano. Now when we load a CD ready to import into iTunes it won't show up in the music library column at all. I had the old iTunes for an iPod mini on another computer - all I did was put the CD in the drive then iTunes would read the song titles and show the CD in the library column, then I'd import and all was good. This version will not show the CD in the library column, I have looked at advanced preferences but can't find out what's going wrong. Can anyone PLEASE PLEASE help? This is very frustrating!!!! I'm supposed to be on holiday and relaxing!!! Happy new year to all you fellow Nano haters!

    Are the CD's you are trying to install store bought CD's?
    What you might try doing if the CD drive is not showing up under the source is going to file and then clicking on Add to Library within iTunes. Find the CD inside of My Computer and trying to add the music.

  • I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

  • I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

    I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly.  Should I just delete the new profile and try again?

    If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
    Please tell us more about the modem if the above gives you issues.

  • I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???

    I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???
    Also in my iPhone4 the photos that I have downloaded manually from my computer cannot be erased from the phone, how do i do this.???

    Sounds like you are not running iOS 5 ..........
    Update your iPad 2 to iOS 5............
    I purchased an iPad 2 for my wife for Xmas and it did not come with iOS 5 so I had to update it......
    http://www.apple.com/icloud/get-started/
    http://support.apple.com/kb/HT4972

  • How can I permanently prevent the Reminder Fox icon (in the Add-on Bar) and the Add-on Bar from showing?

    Installed: Firefox 27. ReminderFox 2.1.4. Windows XP Professional
    Since ReminderFox 2.1.4 was installed, I have deselected the 'Status/Add-on Bar Display 'Bow' and text on status bar' numerous times, but the setting never takes effect even after pressing the Apply and OK buttons.
    The Add-on Bar, which has always been deselected from the View > Toolbars menu, shows as selected in the menu, and even though I deselect it manually, when I close Firefox and then reopen it, it shows again as selected in the menu.
    How can I permanently prevent the Reminder Fox icon (in the Add-on Bar) and the Add-on Bar from showing?

    It is possible to uninstall the add on or to customize the add on toolbar from the Toolbar Customize option. To troubleshoot this try this article [[How to fix preferences that won't save]]

  • When I try to print a photo from iphoto, I select the photo, click print and the preview shows there is a lot of the photo cut off.  It also prints this way.  How can I print the whole picture?

    When I try to print a photo from iphoto, I click print and the preview shows a lot of the photo cut off.  It also prints this way.  How can I print the whole photo?

    After selecting File > Print, a pop-up window should appear. Select "Customize" and this should take you back into a panel within iPhoto. Towards the bottom, you should see an option for "Layout". Select this option and choose the correct photo orientation.
    Hope this helps!

  • HT4436 On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?

    On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • HT1364 I am trying to change the location of my itunes library and the library doesn't copy to the new location.

    I am trying to change the location of my itunes library and the library doesn't copy to the new location.  I followed the steps in the help message (HT1364) exactly but I am not prompted to consolidate in the new location.  Any suggestions?

    Hi ed2345 and diesel vdub,  when I consolidate, the files start copying to the new location and part way through I get a message that the copying failed (-50) even though all of the files are already in place in the new location.  Should I just delete the itunes in the new location and manually copy the files again?  But in itunes, I have indicated that the new location is on the external hard drive but itunes seems to ignore that and still looks for itunes in the original location on my internal hard drive.  I disabled the location of itunes in the old location (by labelling itunes as "itunes old") and it tried to create a new itunes at the old location and prompted me to import music and videos from a CD or other source.  I hope I am making sense.

  • I am unable to update any add-ons at all. Every time I try and install an add-on or even the new "show hidden add-ons" add-on, I get a server error. How do I fix this?

    I am unable to update any add-ons at all. Every time I try and install an add-on or even the new "show hidden add-ons" add-on, I get a server error. How do I fix this?

    You may have triggered some intermittent database issues but it should be running smooth by now. Let us know if you still see server errors.
    Also, if your addons appear to go missing after updating there is a workaround http://blog.mozilla.com/addons/2011/09/28/issue-discovered-with-firefox-add-on-upgrades/ And there is a 7.0.1 fix on its way.

  • Everytime I attempt to open iPhoto, a message comes up saying, "iPhoto is unable to open this library," and the only option if gives is to quit. How do I get it to open?

    When I select iPhoto to open the application, a message comes up saying, "iPhoto is unable to open this library," and the only option available is to quit. I don't know what library iPhoto is attempting to open, but all I want to do is just start iPhoto over from scratch.

    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library' to find out what Library is in question. Use the 'Create Library' option to make a new one.
    To try and repair the damaged one:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • After upgrading to Aperture 3 I had to 'upgrade' all files. When this was done, there was an Aperture 3 library and the original Aperture 2 library. Are the two libraries identical and can I safely trash the Aperture 2 library?

    After upgrading to Aperture 3 I had to 'upgrade' all files. When this was done, there was an Aperture 3 library and the original Aperture 2 library. Are the two libraries identical and can I safely trash the Aperture 2 library?

    If the upgrade completed successfully and you are running Aperture 3 on the converted library and you're sure all the images that were in the old library are in the new library then you could delete the Aperture 2 library.
    However I'm the paranoid type and when it comes to deleting images I'm always hesitant. If you can fine a place to archive the old library that  would be your a better option.
    At a minimum I would keep the old library around for a month or so after switching to Aperture 3 just to make sure in case something pops up.
    regards

  • TS1702 I have purchased a magazine through Zinio from the app store and my account has been charged, however, there is no magazine in my library and the new edition has been published

    I have purchased a magazine through Zinio from the app store and my account has been charged, however, there is no magazine in my library and the new edition has been published

    Oh gosh, I saw the same issue. Because i was messing around with something earlier. I don't know why Apple took off the option of "none" as a payment since not everyone puts in a credit card and people use iTunes gift cards. I think they just made that changed recently. Anyways, Ive just found out about this new issue also, so i don't know what you could do... maybe call apple support?

Maybe you are looking for