I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?
I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.
I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.
Similar Messages
-
Mail opens and then starts loading but never stops loading!
Mail will not stop loading!
I open mail and it looks fine. It brings up the ranbow loading cursor. I waited an hour and it did not stop! Finaly I used force quit (which said it was non respnsive). Can anyone help me?
MacBook Core 2 Duo Mac OS X (10.4.8)Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.
Finally, try launching Mail under the following conditions (you may need to force quit it first if it’s running) and post back with your observations:
1. Holding the Shift key down until the main window appears.
2. With no Internet connection. -
hi there, I am trying to upload my photos from my Iphone 5s to my Iphoto on my macbook air, but they wont load. \
It says "loading" but it's not.... does anyone have a solution? Thanks in advance.There are 9 different versions of iPhoto and they run on 10 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
Start-up and blue screen after boot
Hello members
Would someone of you be able to help me with the above problem.
I have copied/pasted from the console some of the potential problems with the start-up below.
The desktop seems to take quite long to load with a couple of changes in the blue screen colour first befor the desktop is loaded and my second screen takes longer then it used to.
Thanks
22/11/08 8:04:47 AM com.apple.coreservicesd[59] NOTE: Using non-mach-based version of client -> server communication, via direct function calls. 22/11/08 9:00:48 AM Terminal[159] .sdef error: Operation could not be completed. (NSXMLParserErrorDomain error 1549.)
22/11/08 8:55:27 AM com.apple.coreservicesd[62] NOTE: Using non-mach-based version of client -> server communication, via direct function calls.
22/11/08 11:39:50 AM com.apple.FolderActions.enabled[115] launchctl: Error unloading: com.apple.FolderActions.folders
22/11/08 11:39:51 AM com.apple.coreservicesd[65]
NOTE: Using non-mach-based version of client -> server communication, via direct function calls.
nullHi CPfreak
thanks for your reply!
Here the result.
IPCI/SATA@1F,2/AppleICH8AHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlo ckStorageDevice/IOBlockStorageDriver/Hitachi HTS542525K9SA00 Media/IOGUIDPartitionScheme/Customer@2
BSD root: disk0s2, major 14, minor 2
AppleUSBMultitouchDriver: starting
Jettisoning kernel linker.
Resetting IOCatalogue.
GFX0: family specific matching fails
Matching service count = 1
Matching service count = 2
Matching service count = 2
Matching service count = 2
Matching service count = 2
Matching service count = 2
Previous Shutdown Cause: 5
E:[AppleUSBBluetoothHCIController][StartInterruptPipeRead] there is alredy a pending read, skipping.
BTCOEXIST on
wl0: Broadcom BCM4328 802.11 Wireless Controller
4.170.46.9NVDANV50HAL loaded and registered.
GFX0: family specific matching fails
GFX0: family specific matching fails
GFX0: family specific matching fails
vmmon: Loaded @ 0x68a4f152: Info 0x68a5dda0 Name com.vmware.kext.vmx86 Version 2.0.0 build-116369 at Sep 10 2008 18:47:35
vmmon: Service start
vmmon: Instrumenting bug 151304 without page information...
vmmon: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
vmmon: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
vmmon: Cycles 0x00000000000000C8
vmmon: Fast clock thread started.
vmmon: Module initialized.
vmmon: Registering for power state changes
yukon: Ethernet address 00:1f:f3:5a:e4:39
AirPort_Brcm43xx: Ethernet address 00:1f:5b:c6:88:bb
vmci: Loaded @ 0x54ce3152: Info 0x54cec1e0 Name com.vmware.kext.vmci Version 2.0.0 build-116369 at Sep 10 2008 18:47:35
vmci: Initializing module.
vmci: VMCI: Driver initialized.
vmci: Module initialized.
vmioplug: Loaded @ 0x54cf2152: Info 0x54cf5d60 Name com.vmware.kext.vmioplug Version 2.0.0 build-116369 at Sep 10 2008 18:47:37
vmnet: Loaded @ 0x5b762152: Info 0x5b769020 Name com.vmware.kext.vmnet Version 2.0.0 build-116369 at Sep 10 2008 18:47:37
vmnet: Initializing module.
vmnet: VMNet_Start allocated gOSMallocTag
vmnet: Module initialized.
vmnet: VNetUserIf_Create: created userIf at 0x74c2300.
vmnet: VMNetConnect: returning port 0x74c2300
vmnet: Hub 8 does not exist, allocating memory.
vmnet: Allocated hub 0x743a000 for hubNum 8.
vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:f3:6f:0a
vmnet: Hub 8
vmnet: Port 0
vmnet: VNetUserIf_Create: created userIf at 0x74c2000.
vmnet: VMNetConnect: returning port 0x74c2000
vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:f3:92:ff
vmnet: Hub 8
vmnet: Port 0
vmnet: Port 1
vmnet: VNetUserIf_Create: created userIf at 0x758fe00.
vmnet: VMNetConnect: returning port 0x758fe00
vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:fb:e3:99
vmnet: Hub 8
vmnet: Port 0
vmnet: Port 1
vmnet: Port 2
vmnet: VNetUserIfFree: freeing userIf at 0x758fe00.
vmnet: netif-vmnet8: Adding protocol 2.
vmnet: VNetUserIf_Create: created userIf at 0x758fc00.
vmnet: VMNetConnect: returning port 0x758fc00
vmnet: Hub 1 does not exist, allocating memory.
vmnet: Allocated hub 0x74a4800 for hubNum 1.
vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:f2:21:7b
vmnet: Hub 1
vmnet: Port 0
vmnet: VNetUserIfFree: freeing userIf at 0x758fc00.
vmnet: netif-vmnet1: Adding protocol 2.
vmnet: VNetUserIf_Create: created userIf at 0x758f800.
vmnet: VMNetConnect: returning port 0x758f800
vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:fb:e8:2f
vmnet: Hub 1
vmnet: Port 0
vmnet: Port 1
AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
MAC AUTH succeeded
AirPort: Link Up on en1
vmnet: VNetUserIf_Create: created userIf at 0x75ff300.
vmnet: VMNetConnect: returning port 0x75ff300
vmnet: Hub 0 does not exist, allocating memory.
vmnet: Allocated hub 0x760c800 for hubNum 0.
vmnet: VMNETSOBINDTOHUB: port: paddr 00:50:56:fc:45:70
vmnet: Hub 0
vmnet: Port 0
vmnet: bridge-en1: got dev 0x749be04
vmnet: bridge-en1: wireless interface detected.
vmnet: bridge-en1: up
vmnet: bridge-en1: attached
vmnet: VNetUserIfFree: freeing userIf at 0x75ff300.
AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt -
I have a macbook prob and I'm trying to clean it up. but its says i have 71GB used of "OTHER". how can i get a break down of this "OTHER"??
Thank You!The info from the below linked article may be of help.
You have to download the app OmniDiskSweeper to do the job.
http://pondini.org/OSX/DiskSpace.html
Best. -
I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I'm having trouble upgrading to ITunes v12.0.1 with
Win 7. Download progress bar stalls and eventually cancels itself. Have tried
Tools --> Download Only, but same result. Have been using iTunes for 3+
years without difficulty; I have lots of ram, hard drive and speed.
Thanks for your inputOne step listed in the link to "helpful" info, was (when Iooked 30 seconds ago), to search for and download the newest version of iTunes. I'm running iTunes on Win 7 machine and was prompted to update today, 10.22.2014, and did so without a problem. Having said that, however, it looks as though the latest iTunes (12.0.1.26) is finally doing what the last version refused to do, which is to actually fully populate all my playlists on my 6, but there is a hitch: 12.0.1.26 will NOT allow you to show the sidebar unless you click on "playlists," that is, you cannot keep it open all the time.
And, when plugging the 6 into the computer, the phone icon shows up but clicking on it does nada. What does work, for some strange reason, is clicking on the tiny icon (just under the "Store" menu link at top screen) which looks much like a tiny barrel, someone's idea of external drives, I suppose. The phone then comes up, with the list of stuff on the phone just under it where the sidebar used to be. Sync is now restricted to the lower right of the screen.
Apparently, you will also need to update your iPhone's software as well; some friends with the 4 and 4s, however, had troubles with them after upgrading. The message from Silicon Valley (I can see Apple from my backyard, ha ha) is apparently, "keep upgrading," folks, get rid of those old phones. -
Trying to connect with my father on Facetime and all we get is connecting but never connect. Have updated the software, Trying to connect with my father on Facetime and all we get is connecting but never connect. Have updated the software
Hello trailblazer59,
The article linked below provides some useful troubleshooting steps that can help get FaceTime working on your iPhone.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
Cheers,
Allen -
Hi, I’ve recently bought an iPad2 and can’t get connected with AppStore or iTunes, when I tap on these icons a grey page pops up saying is loading but never opens the page, no failure message is displayed, it just keep saying is loading.
Apparently it is not an issue with wifi since Safari, You Tube and Maps work well, I’ve tried some of the tips, e.g. log off/on my Id, change password but no one worked.
Your help will be highly appreciated.
Thank you.
Luis.Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
I have a new iPad and tried to set up as new, then realized i needed to sign in as an existing itunes user. I reset my new ipad as new, but now when I sign in using my existing ipad it backs up to the new one I just set up. I need my itunes account on my new ipad. help
You want to restore from the backup. Do not set up as new. You can read the article that Tom posted above, but it really is pretty simple.
Transfer any purchases from the old iPad into iTunes, backup the old iPad in iTunes and them sync one more time.
Connect the new iPad and when prompted during activation, restore from the backup that you just created and then sync with iTunes.
The new iPad should be identical to the old iPad, but you will have to enter some passwords again on the new device.
Transfer purchases.
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766 -
Grey and Blue screen but computer won't start up and I don't have a start up disc
Help!
I cannot get my computer to start! Yesterday I was using powerpoint and the screen started to split in two and not repond. I turned off the computer and then grey apple screen on start up was striped, followed by a blank grey screen. After a minute the fan started to sound very loud but the computer would not start up. I did a safe reboot followed by resetting the PRAM and eventually the stripes dissappeared and it started normally.
Once it was turned on everything worked fine other than powerpoint. The split screen happened again when I tried to use power point, but it re-started normally and I forced power point to quit on re-start. It has worked all day without a problem.
This evening I left it open and the screen was black and unresponsive when I came back. I forced it to turn off but again I am faced with the stripey screen, then the grey screen of nothingness. A couple of times it's gone beyond that to a stripey blue screen.
I've tried re-setting PRAM, safe login in, and I've tried pressing command on start up to go in to the repair disc- it will let me pick the disc from the drop down menu but then goes no furhter than the grey screen.
My husband has lost my start up/ set up discs and it is nolonger in waranty. I also thought everything was backed up on Icloud but it doesn't seem to be there!
Is there anything I can do?! Please help!Spaniel-Rose,
you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from Apple or iFixit. -
i have 12 cent credit and i wanna change country but its says i have to use the credit and theres no app for 12 cent
Click here and request assistance.
(90578) -
Please help! When I tap Purchased on my ipad, it won't open to show me the purchased apps. It says 'Loading' but never does. I use the apps to help my daughter who has an Autism Spectrum Disorder. Thank you in advance
Hi, I was having the same problem on my new Mini. It would load fine on my iP3 and my phone but not my mini. My two daughters both have iPads linked to my iTunes account. They download a bunch of apps and I suspected this had something to do with it.
After a few hours, I found how to hide the purchased apps in iTunes (go to Store, App Store (up the top) then the Apps tab. Hover the mouse until you get an X then click on it. It doesn't delete it from your library, just stops it showing up on your iPad. I did this, launched Purchased on my iPad mini and boom they all came up. I just hid those I don't use/want any more, and some of the older ones my kids have purchased. Cut the number down from nearly 500 to 280 and it loads like a charm now. -
i currently use a iMac OS X 10.6.8 and I cannot open iPhoto. Every time I click on iPhoto the coloured wheel comes up and lets me go no further, leaving me with no other option but to force quit the application.
it is showing all my existing photos but will not let me click on any of them, nor will it allow me to import any new photos into iPhoto.
I am really worried that I cannot access all of my photos and even more worried as I need to back them up!!
HELP!!Try repair the Library:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
my emails will not open. when you choose a particular email, it continues to indicate "loading" but never does. i can see the wheel cycling in the browser, on and on and on.
Try Norton support for clarification of their preferences or settings in a newer version of their software than what is displayed in Firefox support. <br />
http://norton.lithium.com/norton/
Nice choice of a "name" for this forum, it really makes the support volunteers want to take their time to try to help you.
Maybe you are looking for
-
Can I set up two Firefox browser home pages with associated gmail accounts on a single computer. When one home page is opened it has a gmail link for one member of the family. When the other home page is opened, it has a gmail link for a different me
-
ITunes corrupts ID3v2 tags in mp3
First - I couldn't find any form for a bug report on this site, so I'm using this forum. If it is wrong please feel free to redirect me to correct place. Well, the story is the following: I've tried to add a directory with it's subdirectories contain
-
10.4.4 Update failed. Get "JS Error.."
Hello, I tried to update from 10.4.3 to 10.4.4 via "Software Update". The update failed with an error message and I was advised to try it again. After the analysing phase of Software Update it tells me that everything is uptodate, but thats not true,
-
I comment the app on itunes but I can not complete the purchase of the app ask you just how I can do better
-
GL_INTERFACE_CONTROL TABLE 설명
제품 : FIN_GL 작성날짜 : 2003-11-18 GL_INTERFACE_CONTROL TABLE 설명 ============================= PURPOSE GL_INTERFACE_CONTROL table에 대해 알아보도록 한다. Explanation gl_interface_control table은 gl_interface 까지 data가 넘어 온 후 journal import program 수행 시 에 data 가 inser