I copy a row and then the next row as no actions

I know this is easy.
when I set up actions in a row and try to copy it and past a row below it is not there.
can anyone help?

Hi,
One of the easiest ways to do this is simply select the row (discussion below about selecting) and hold the "Ctrl" + "D" ("D" is for "Duplicate"). This will duplicate the row and place it directly under it. Also, you can use "Duplicate" by clicking Edit>Duplicate
Selecting rows can sometimes be tricky. If I use the mouse, I always try to confirm in the Object and/or Hierarchy Pallet.The mouse can select the row (arrow with an underscore) or all the objects in the row (arrow no underscore)
Here are 3 ways:
The mouse can select the row (arrow with an underscore) or all the objects in the row (arrow no underscore). You move the cursor just to the left of the table and the arrow appears.
One of the best ways I find is selecting the row in the Hierarchy Pallet.
Select an object in the row and on the tool bar click Table>Select>Row
I avoid pasting anything if I can help it. If you use flowed forms and if you paste a lot, and If you aren't careful, you'll end up with a corrupt form. Designer is very unpredictable about where it will paste. If you have a large form, it can take a minute or two to track down a pasted object's location. Then you have to move it to where you want it.
Better to use "Duplicate". That usually means it will be next to the item you're duplicating. If you copy and paste, paste, paste repeatedly too fast, You can really mess things up. Every Paste command takes longer than you think to execute. Wait at least 2 seconds before doing anything after pasting. Otherwise, you'll interpt Designer while it's busy writing the new XML. Yes, Designer is still busy doing work even after you see the new item appear. Be patient.
Good luck!
Stephen

Similar Messages

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

When playing songs in iTunes playlist, How do you keep the next song from jumping to next song? I am working on song list updating other tracks info and then the next song starts and I lose my spot in song list?

When playing songs in iTunes playlist, How do you keep the next song from jumping to next song? I am working on song list updating other tracks info and then the next song starts and I lose my spot in song list?

Max OSX 10.6.8, iTunes 11.1
I had a similar problem: I wanted to synch my playlist to my iphone. I like to have my playlist sorted by genre. But under each genre, albums are not sorted by the track numbers. This is a problem, especially when I am listening to club mixes when the DJ smoothly transitions from 1 track sequentially to the next one. Under the properties of each audio file, the Track Numbers and Disc Numbers are already there.
My perfect solution was to turn On Sorting - Sort Album under View>Show View Options. Then, select all the songs in that album (Shift click, Cmd click, etc) , and Edit multiple item information (Cmd I). You will see Info-Video-Sorting-Options buttons. Click on Sorting. Then, under Sort Album, Enter the name of the album. Then OK.
You should now have the playlist sorted by Genre, then each album individually sorted by track numbers. On your playlist you should see, if you scroll right, the column added called "Sort Album".
Hope this helps.

TS3297 I bought an album, two of the twelve songs play about half the way through, then stop, and then the next song in line starts playing. How do I get the songs downloaded so they play to the end?

I bought an album, two of the twelve songs play about half the way through, then stop, and then the next song in line starts playing. How do I get the songs downloaded so they play to the end?

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

My iPhone 4a keep telling to plug it in to iTunes and restore it I do that and then the next day it ask me to do the same thing what is the problem?

My iPhone 4a keep telling to plug it in to iTunes and restore it I do that and then the next day it ask me to do the same thing what is the problem? I need and trouble shoot or some type of solution for this problem.

If you have restored as new and the device continues to go into restore mode, then it appears you need to make an appointment at the Genius bar as there could be a hardware issue with your device.
One last question, the phone has not been hacked/jailbroken, has it?

Prints two lines perfect and then the next line cannot be read.

Pixma MX882 When printing from computer or copying it prints two lines perfect, then the third line is not clear. Can see letters are fuzzy (not clear, but can tell it tried to print) Please help with any suggestions for correcting this problem. I have changed out the ink carts and run maintenance program. Thanks. Ross

Hi rossfwalker,
We recommend performing an automatic and manual print head alignment on the printer to see if this will resolve the issue. To do this, please follow the steps located here. Should you still experience difficulty, the printer will require servicing; please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have had ATV2 for a month now and it was working great up until about 3 days ago. I used it to play music one night off home sharing from my itunes, and then the next day, it wouldnt recognize home sharing and let me use airplay/mirroring. Any thoughts?

So when i turn on my ATV2 now, and go to computers, it doesnt recognize my computer anymore. I didnt touch anything from the previous day after it last worked, so im not sure why it suddenly stopped working. I've tried turning off/on homesharing, siging in with a different account but still using my appleid..i've reset the ATV2 to it factory settings and then reinstalled the recent update but nothing seems to be working. Whenever i turn on homesharing on my macbook pro, it akknowledges that its on, but then the little logo for homesharing goes away as soon as i click done. Not sure if that is normal or not. Im assuming this is a prb with itunes because my photostream works off ATV2, receiving pics from my comp,but i cant seem to stream movies etc. The airplay icon is also no longer on my mac screen. I have no idea whats going on. Any ideas?
thanks

So when i turn on my ATV2 now, and go to computers, it doesnt recognize my computer anymore. I didnt touch anything from the previous day after it last worked, so im not sure why it suddenly stopped working. I've tried turning off/on homesharing, siging in with a different account but still using my appleid..i've reset the ATV2 to it factory settings and then reinstalled the recent update but nothing seems to be working. Whenever i turn on homesharing on my macbook pro, it akknowledges that its on, but then the little logo for homesharing goes away as soon as i click done. Not sure if that is normal or not. Im assuming this is a prb with itunes because my photostream works off ATV2, receiving pics from my comp,but i cant seem to stream movies etc. The airplay icon is also no longer on my mac screen. I have no idea whats going on. Any ideas?
thanks

I post a picture in a forum and then the next time I check it is gone but the message is still there. I am not the only person this is happening to

I posted the picture along with the message. The next time I checked it was not there though the message was still there! I checked with the same site on Internet Explorer and it is there!

Your description is too vague to be able to provide an informed answer.
Please provide the address of that forum and a link to the forum thread where you posted a picture that disappeared in Firefox and shows in IE.

Anyone had an issue on iphone 4s where bluetooth connects one day and then the next will not discover anything, but then a little while later it works again? I have 2 audio devices and an apple keyboard that I have this issue with. Effects ALL.

I have an iphone 4s. A while ago it started having issues with bluetooth. All of the sudden, an audio headset I am using quits working with my iphone bluetooth. I check and my iphone doesn't see any of my bluetooth devices. I have an apple keyboard, a headset, and a speaker. Nothing shows up on my iphone but they all connect perfectly to my ipad. Then a day or so later it works again. The are all suddenly there. I just installed iOS7 and I'm still having the same problem. What is UP? Anyone have a clue what is going on?

I have this problem too. I have an iPhone 4, and this wasn't a problem when I bought the phone back in December. I think it came a month or so later and I suspect with a standard upgrade of something like itunes, or iphone software... but I can't pinpoint it to any specific update as it took me a while to notice it. For me, it does this with my work calendar which is run through Microsoft Outlook. But it's the exact same thing - and it means my calendar isn't reliable anymore.
I've made sure the time-zone settings are correct, I've updated all software, and gone through all possible settings for both my i-phone and Outlook. Nothing fixes the problem, even our tech guy at work didn't know what to do. I know it's not just my phone as the exact same thing has happened with my boss's iPhone which is an iPhone 3G, and it frustrates him to no end.
I'm really hoping someone at apple can tell us what's going on, especially since it never used to do this and there doesn't seem to be any way to fix it. If someone thinks they know what itunes update this was due to, let me know - I'll see if I can go back to that older version.

I click run and then the next step is go through the stages but its doesnt come up

im trying to download and step 2 is not showing up

Go to edit-preferences-advanced-
uncheck 'keep itunes media folder organised'
Then make changes and see if itunes keeps the new info...
But warning! if you allow iTunes to organise your files in the future these change will be undone I believe.

Clicking on mail icon and then the next screen displays, the mail icon if a faded green and i click on it and nothing happens; what's with that?

I have set up my POP mail account but I can't display my mail. What's up with that. I have a POP mail account and it sounds like mail is going to my phone, because it shows I have 6 items in my mailbox; however I'm unable to see the mail????

Reinstall OS X.

Okay so i was snapchatting on my ipod and it stoped working so i smacked lightly and then the next thing i know it doesnn't register any of my clicks what do i do??? (oh and my screen has been cracked and my ipod has a dent and hit it in the dent

I WANT TO KNOW WHAT TO DO PLZ ANYONE!?!?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price

When I plug my iPhone in to my computer, iTunes doesn't recognize it as a device. I have deleted and re-downloaded iTunes twice which seems to fix the problem temporarily but then the next time, the device is not recognized.

when I plug my iPhone in to my computer, iTunes doesn't recognize it as a device. I have deleted and re-downloaded iTunes twice which seems to fix the problem temporarily but then the next time I plug my phone in, the device is not recognized.

What happens if you go to iTunes > File > Devices, do you get the option to Sync iPhone?
You could try a reinstall of iTunes. OS X Yosemite: Reinstall apps that came with your Mac

How can i hightlight in excel 3 numbers in a column then skip one, and highlight the next?

how can i hightlight in excel 3 numbers in a column then skip one, and highlight the next?
Example: Column A
highlight      3
highlight      4
highlight      5
skip            6
highlight      7

hold down the cmd (⌘) key while selecting them.

I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.

I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.

downloaded the updated iTunes and that did nothing. I then went through the form about $ very VERY carefully and discovered one field left blank. Once that was filled in, everything worked and I now have my free app.

I copy a row and then the next row as no actions

Similar Messages

Maybe you are looking for