I could not configure a DAQ assitant for any channel

In the wizard after selecting the voltage input i am not able proceed forward i.e i could not find any channels to select in Mychannelsbox,so can any one tell me what should i do and what all the software i need to install to use DAQ.i have complete labview development suite version 7.0 ,i hope to get reply as early as possible,bharat

What version of NI-DAQ are you running? What DAQ card do you have? If you do not have a DAQ card installed, you will be able to start the DAQ Assistant but not complete it since you have no available channels (no card installed).
If you do have a DAQ card installed, is it functioning in MAX? Can you run a test panel on it?

Similar Messages

Could not find the principal resource for user id: paf

I think I have set up iCal server correctly on a MacOSX 10.5.1 server (upgraded from 10.4.x). But regardless of how many different URLs etc I am trying, I can neither access calendars, nor subscribe to them. I am trying both with Safari and Firefox and iCal client on MacOSX 10.5.1.
I have iCal service running.
I have added the user "paf" that have full admin access, and also calendar service is turned on on the server calendar.frobbit.se. Calendar.frobbit.se is one of the hostnames for the server btw.
I have a group called "canusecalendar" that "paf" is a member of.
The access for iCal service on the host is for the group canusecalendar and for the user paf, where paf is administrator.
The closest I have come is when I use a web browser and try to access any URL starting with http://calendar.frobbit.se:8008/. It ask for login, I give the credentials, and in the error log for the iCal service I see the following:
<pre>2008-02-10 20:46:57+0100 [-] [caldav-8009] [AMP,client] Could not find the principal resource for user id: paf</pre>
I do see tons of postings by people that more or less guess what URIs to use in browsers, for group calendars, in iCal client when connecting to an account or subscribing. Does anyone on this list know of an authoritative list of URLs that one should use here and there? The closest I have come is the "advanced" section of the iCal Administration document from Apple.

Yes, I add users using workgroup manager, although the one I now use was added already in version 10.4 of MacOSX Server. I.e. before I upgraded to 10.5.
Here is error.log (after that access.log):
<pre>
2008-02-11 20:32:23+0100 [-] Log opened.
2008-02-11 20:32:23+0100 [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
2008-02-11 20:32:23+0100 [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
2008-02-11 20:32:23+0100 [-] 4 processors found, configuring 4 processes.
2008-02-11 20:32:23+0100 [-] Adding pydirector service with configuration: /tmp/pydirtLZ2ZY
2008-02-11 20:32:23+0100 [-] twistedcaldav.logging.AMPLoggingFactory starting on "'/var/run/caldavd.sock'"
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Log opened.
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Log opened.
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Log opened.
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Log opened.
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up document root at: /Library/CalendarServer/Documents
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up default ACEs on root resource
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up AdminPrincipals
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting root ACL
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring authentication for realm: /Search
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up scheme: kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up document root at: /Library/CalendarServer/Documents
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up document root at: /Library/CalendarServer/Documents
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up default ACEs on root resource
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up AdminPrincipals
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting root ACL
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up default ACEs on root resource
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up AdminPrincipals
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting root ACL
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up document root at: /Library/CalendarServer/Documents
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up default ACEs on root resource
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up AdminPrincipals
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting root ACL
2008-02-11 20:32:23+0100 [-] [caldav-8009] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Could not start Kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up scheme: digest
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring authentication for realm: /Search
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up scheme: kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring authentication for realm: /Search
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up scheme: kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring authentication for realm: /Search
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up scheme: kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8011] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
2008-02-11 20:32:23+0100 [-] [caldav-8012] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Could not start Kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up scheme: digest
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Could not start Kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up scheme: digest
2008-02-11 20:32:23+0100 [-] [caldav-8010] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Could not start Kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up scheme: digest
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring authentication wrapper
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up service
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c930>
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Adding server at 127.0.0.1:8009
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Adding SSL server at 127.0.0.1:8444
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twisted.web2.channel.http.HTTPFactory starting on 8009
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twisted.web2.channel.http.HTTPFactory starting on 8444
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] set uid/gid 93/93
2008-02-11 20:32:23+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Configuring authentication wrapper
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Setting up service
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Configuring authentication wrapper
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Setting up service
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Configuring authentication wrapper
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Setting up service
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Adding server at 127.0.0.1:8011
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Adding server at 127.0.0.1:8012
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Adding SSL server at 127.0.0.1:8447
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Adding server at 127.0.0.1:8010
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Adding SSL server at 127.0.0.1:8445
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Adding SSL server at 127.0.0.1:8446
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] twisted.web2.channel.http.HTTPFactory starting on 8012
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] twisted.web2.channel.http.HTTPFactory starting on 8010
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] twisted.web2.channel.http.HTTPFactory starting on 8445
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] twisted.web2.channel.http.HTTPFactory starting on 8011
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] twisted.web2.channel.http.HTTPFactory starting on 8446
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] twisted.web2.channel.http.HTTPFactory starting on 8447
2008-02-11 20:32:25+0100 [-] [caldav-8012] [-] set uid/gid 93/93
2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:32:25+0100 [-] [caldav-8012] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:32:25+0100 [-] [caldav-8010] [-] set uid/gid 93/93
2008-02-11 20:32:25+0100 [-] [caldav-8010] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
2008-02-11 20:32:25+0100 [-] [caldav-8011] [-] set uid/gid 93/93
2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:32:25+0100 [-] [caldav-8011] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
2008-02-11 20:32:57+0100 [-] [caldav-8009] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd-pydir.sock'))
2008-02-11 20:32:57+0100 [-] [caldav-8009] [AMP,client] Unauthenticated users not enabled with the 'calendar' SACL
2008-02-11 20:33:04+0100 [-] [caldav-8010] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd-pydir.sock'))
2008-02-11 20:33:04+0100 [-] [caldav-8010] [AMP,client] Could not find the principal resource for user id: paf
2008-02-11 20:33:35+0100 [-] Received SIGTERM, shutting down.
2008-02-11 20:33:35+0100 [-] (Port None Closed)
2008-02-11 20:33:35+0100 [AMPLoggingProtocol,0,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:33:35+0100 [AMPLoggingProtocol,1,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:33:35+0100 [AMPLoggingProtocol,2,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:33:35+0100 [AMPLoggingProtocol,3,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:33:35+0100 [-] Main loop terminated.
2008-02-11 20:33:35+0100 [-] Server Shut Down.
</pre>
And here is access.log:
<pre>
Log opened - server start: [Mon Feb 11 20:32:23 2008].
192.165.72.12 - - [11/Feb/2008:20:32:57 +0200] "GET / HTTP/1.1" 401 141 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-us) AppleWebKit/523.10.6 (KHTML, like Gecko) Version/3.0.4 Safari/523.10.6" [6.4 ms]
192.165.72.12 - - [11/Feb/2008:20:33:04 +0200] "GET / HTTP/1.1" 403 123 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-us) AppleWebKit/523.10.6 (KHTML, like Gecko) Version/3.0.4 Safari/523.10.6" [60.7 ms]
Log closed - server stop: [Mon Feb 11 20:33:35 2008].
</pre>

XML Template could not find error when submitting for other than English

Hi All,
When I try to submit my custom xml report through SRS window, in NON english language, I get following error
"The simultaneous application program could not find an xml template for the program. Check the configuration of the data and information medianate template for the program administrator the responsibility to xml editor" --- (Transalted from spanish message by me)
and then giving FRM-41072:can not create the group req_layout
error.
I have other xml report for which I have no this type of problem
Please help me.
Edited by: DharV on Oct 30, 2011 10:42 PM

Hi,
I have a template created using UI Shell and have 2 fragments being used as a dynamic region. So far so good. All is well and when i run the application i can see the regions.
Don't know what this has to do with the problem and its solution. Its confusing.
Now i created a custom template (.jspx) file and tried to use the same fragments in this template.
Assume you meant that you used the same task flow reference - correct ?
If you set definition="public" , does it make a difference ?
Frank

Windows setup could not configure Windows to run on this computer's hardware.

Just over a month ago, I purchased 6 identical Lenovo B5400 laptop computers for a small charity. Each is preconfigured with Windows 7 Professional, with a Win 7 recovery partition, and is supplied with a set of Windows 8 Pro recovery media (the charity
requires Windows 7 installed). I unpacked three laptops, configuring the first one as required by the charity, and using the second and third to experiment with the sysprep / imagex process before applying it to the configured system for migration to the other
laptops. After securing the second and third laptops by taking image backups, I applied sufficient configuration to the second to test the process, then sysprep'd it, and imagex'd it to a network drive, and to a USB stick. So far so good. After using imagex
to apply the custom .wim file to the third laptop, I found it booted up through the "updating registry settings", "starting services", and "installing devices" phases, but when it got to "applying system settings", it
displayed a messagebox titled "Install Windows", with the message "Windows Setup could not configure Windows to run on this computer's hardware". In the last few days, I have explored all the other incidences of problems with similar
symptoms found by a google search, including those on this forum, and tried numerous experiments without getting any further (in most cases not even getting as far)". The sysprep'd image on the second laptop boots ok, going through the same phases up
to "applying system settings", then reboots normally, requests username and PC name, etc, the only defect being that it loses the Realtek display driver (which only takes 2 minutes to restore). I have tried imagex /apply to put the custom .wim file
back on the same laptop it was taken off (the second laptop), and it works exactly the same as it did for the same system immediately after sysprep'ing. The only difference between laptops 2 and 3 is a serial number (QB07523967, and QB07524012). Is there any
reason that this should not work? If it will not, I'm faced with about 100 hours to configure the 6 laptops individually to the charity's requirement.

Hi,
This issue can be caused by hard disk settings in bios or DVD drive or bad SATA cable. Please try those steps below:
Upgrade the BIOS to the latest version; go into the BIOS and activate "Load Fail-Safe Defaults".
If you connect the SATA drives, please set the SATA controller to compatible mode in BIOS.
For more information about this issue, please refer to the article:
http://support.microsoft.com/kb/2466753
Andy Altmann
TechNet Community Support

WDS "windows setup could not configure Windows on this computer's hardware"

I use WDS on a 2008 R2 server to deploy Windows 7 Enterprise with SP1 64-bit custom images to a variety of devices within our enterprise. This has worked flawlessly for two years. I have three desktop models and three laptop models (all HP) that share
a common .wim image. I PXE boot a desktop and choose the image file to deploy. It deploys like magic - until this past week. HP sent us a replacement drive for warranty repair on one computer and on that one PC I started seeing the "Windows setup
could not configure Windows on this computer's hardware" message after deploying Windows 7. The image deploys just fine, the computer reboots just fine, services are set up, all devices are detected. As soon as "Setup is installing devices" hits
100% and the "Setup is applying system settings" phase begins, that message appears. After researching the error and pulling the logs that Microsoft's KB 2466753 describes, it seemed that my problem was related to an "Advanced Format"
disk in that new computer. What I don't get is that they state that this problem was resolved in SP1 (which is what I'm deploying!). So, I started downloading storage drivers to my boot image thinking that maybe a newer driver would fix things. Eventually
(many drivers later), I got the new hard drive to successfully take my Windows 7 image. Here's where it all went to pieces. No sooner had I corrected the problem on that ONE machine, that none of my other machines would successfully re-image. After
2 years of flawless operation, now all my computer models exhibit this same error (except the one with the new replacement drive). After recreating my boot image in WDS (being sure to pull it from a Win 7 SP1 DVD) and adding every driver in WDS practically,
I've gotten all but one particular model to successfully image. No matter what drivers I add (keep in mind, that no drivers have been removed
from WDS during any of this process), the HP z210 desktops I use will not accept the image. Microsoft suggests flipping BIOS settings but why the heck would I want to do that on every machine when their BIOS settings have never been a problem
before this? They also say I should only need to download special Intel drivers if my disks are set up with RAID - which they are not. Anyway, as a test, I inserted a standard Windows 7 Enterprise with SP1 64-bit DVD (same one I used to extract my boot.wim)
and installed Windows on that model with no trouble at all. I only get this error when deploying through WDS. I'm at my wits end and would appreciate any and all help at this point. Thank you!

Hi,
Based on my understanding, the current situation is all other computers deployment is fine but z210 desktops.
If so, it seems like you have the incorrect driver in WDS for that particular computer z210 desktops you used.
I suggest install it from WDS without driver for test.
In addition, you can post this issue in
Setup Deployment to check the WDS setting issue.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Installation problem because errer message of "WINDOWS SETUP COULD NOT CONFIGURE WINDOWS TO RUN ON THIS COMPUTER'S HARDWARE"

Respected Sir,
My name is Md. Naushad, contact No- 9436507010.
Sir, hamara ek shopping mall hain, jismein ek server and 5 nos. cash counter clint pc hein, server ju computer hein ismain hamne WINDOWS SMALL BUSINESS SERVER 2008 original os use kar raha ho, yein server calte hue humnein pehele bhi 3-4 bar format korke
dubara ready kiya tha, job koi problem huta tha tu, kuch din pehele se server mein firse problem ho rahi thi (server open nehi hu rahi thi, tu hamne data backup leke pehele jis tarha se server install kiya tha usi tarha se humne install karne ki kusis ki tha,
tu jab humne windows small business server 2008 software ka original disc-1 se installation start karti hu tu kuch der install huke ek error message aaa rahi hein, ju ki "WINDOWS SETUP COULD NOT CONFIGURE WINDOWS TO RUN ON THIS COMPUTER'S HARDWARE."
yein message aa rahi hein, jiske baad server installation bech mein hi band hi jati hein, jiske karon hum server ready kar nahi pa rahi ho, so plz help me, ta ki mein server ku firse install kar sakti ho.
we wait for ur valuable response, plz help us sir.
Thank u.

Hi,
Sorry for my delay.
Based on the error message, please refer to following similar thread and KB, then check if can help you.
SBS
2008 SP2 " Windows Setup could not configure Windows on this computer’s hardware"
“Windows Setup could not configure Windows on this computer’s
hardware” installation error on a Windows 7-based or a Windows Server 2008 R2-based computer
However,
please understand that these forums will provide support in English. Since we do not familiar with this language which you use to describe this issue, it is very difficult
for us to help you with your question. If you could ask your question in English, I will be very happy to help.
If the issue is urgent to your business, it is recommended that you contact Microsoft Product Support Services
via telephone so that a dedicated Support Professional can assist you recover the server in a more efficient manner. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below.
http://support.microsoft.com/contactus/?ws=support&ln=en-us
If you are outside the US please see
http://support.microsoft.com/ for
regional support phone numbers.
Thanks for your understanding.
Hope this helps.
Best regards,
Justin Gu

"Windows Setup could not configure Windows to run on this computer's hardware" error using MDT

Good day. I am using Microsoft Deployment Toolkit to deploy images to a group of ClearCube R3080D bladed PCs. Below are the server details:
VMware virtual server with Server 2008 R2 Enterprise Service Pack 1
Microsoft Deployment Workbench Version 6.1.2373.0
Management Console 3.0 Version 6.1(Build 7601: Service Pack 1)
Windows Deployment Services Version 6.1.7600.16385
The image I am deploying to the blades is that of Windows 7 Enterprise x64 Service Pack 1 with Office 2010 and a few other third-party applications.
I have pushed this image to literally hundreds of blades successfully. I had a problem with one blade and found that the HDD was faulty. I RMA’d that HDD and installed the replacement. I pushed the same image to the blade and it works fine to the very end
then I receive the error ”Windows Setup could not configure Windows to run on this computer’s hardware.”
I have checked the BIOS configurations on this blade and they are identical to those of several known good blades. In fact, I swapped HDDs between a known good blade and the blade in question. The problem seemed to follow the HDD. Therefore, I assumed that
ClearCube sent a faulty HDD. I had the identical problems with a second HDD from ClearCube so I’m sure that the HDD is fine.
I have read through http://support.microsoft.com/kb/2466753
as well as many other questions posed by other folks and I have yet to find a good solution.
Again, this image works on all other blades that are of the same model and the HDDs are also of the same model. I'm quite confused!
Tony

Tony?
What are you doing posting the same question 5 times, within 3 hours???
http://social.technet.microsoft.com/Forums/en-US/67f72721-da1b-42bc-b373-9064fe1a8245/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
http://social.technet.microsoft.com/Forums/en-US/9e7ca626-5b67-4a3f-ade0-4bac767e060f/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
http://social.technet.microsoft.com/Forums/en-US/8c508acc-ad40-4608-911c-fbfbc5e293fe/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdthttp://social.technet.microsoft.com/Forums/en-US/a8a98fce-0ddf-4a59-ba8a-9acab7de0c5e/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
If this post is helpful please click "Mark for answer", thanks! Kind regards

Fat Jar Export: Could not find class-path entry for 'C:Java/jdk/mysql-connector-java-

ok friends,
have a normaly running project in eclipse and want to create a jar file...i tried ewerythin in ->export but nothing function
i wanted to create a runnable jar file but that error ecures:
JAR export finished with warnings. See details for additional information.
Exported with compile warnings: ICQJJ/src/ICQJJ.java
Jar export finished with problems. See details for additional infos.
Fat Jar Export: Could not find class-path entry for 'C:Java/jdk/mysql-connector-java-5.1.8-bin.jar'
what's the problem?
ok, i am using a mysql db und using the driver mysql-connector-java-5.1.8-bin.jar....
i improted this jar file like this run -> run configuration -> classpath -> add external jar....
pls help me

That looks like it might be a binary-distribution JAR that you should unjar. The actual JAR for the classpath is probably inside it.

WebGate: Could not configure log engine (Linux)

After installing the WebGate on Linux AS 3 with Apache 2.x I am getting the error message in apache error.log:
WebGate: Could not configure log engine
whenever I am trying to access http://localhost
Could anyone offer some suggestion on how to fix it?
Thanks Kris

Thanks for the response. I was using the default version of oblog_config_wg.xml initially. Below is the current one I am using.
I end up with the error in my apache error log every time I navigate to the server from a web browser. The sections I changed are below in bold. Thanks for any insight you can provide.
<CompoundList
xmlns="http://www.oblix.com"ListName="logframework.xml.staging">
<SimpleList>
<NameValPair
ParamName="LOG_THRESHOLD_LEVEL"Value="LOGLEVEL_WARNING">
</NameValPair>
<NameValPair
ParamName="AUTOSYNC"Value="True"></NameValPair>
</SimpleList>
<CompoundList
xmlns="http://www.oblix.com"
ListName="LOG_CONFIG">

<ValNameList
xmlns="http://www.oblix.com"
ListName="LogFatal2Sys">
<NameValPair
ParamName="LOG_LEVEL"
Value="LOGLEVEL_FATAL">
</NameValPair>
<NameValPair
ParamName="LOG_WRITER"
Value="SysLogWriter">
</NameValPair>
<NameValPair
ParamName="LOG_STATUS"
Value="On">
</NameValPair>
</ValNameList>

<ValNameList
xmlns="http://www.oblix.com"
ListName="LogAll2File">
<NameValPair
ParamName="LOG_LEVEL"
Value="LOGLEVEL_ALL">
</NameValPair>
<NameValPair
ParamName="LOG_WRITER"
Value="*FileLogWriter*">
</NameValPair>
<NameValPair
ParamName="FILE_NAME"
Value="*/usr/local/apache2/logs/webgate.log*">
</NameValPair>

<NameValPair
ParamName="BUFFER_SIZE"
Value="131072">
</NameValPair>

<NameValPair
ParamName="MAX_ROTATION_SIZE"
Value="52428800">
</NameValPair>

<NameValPair
ParamName="MAX_ROTATION_TIME"
Value="86400">
</NameValPair>
<NameValPair
ParamName="LOG_STATUS"
Value="On">
</NameValPair>
</ValNameList>
</CompoundList>
</CompoundList>

ACL migration Error : 1210 could not find a domain controller for domain "Test Domain" (Old Domain)

Hi
We are migrating from old domain to new domain. Before live migration, we are trying to check the ACE/ACL migration through SubInACL. We are running the SubInACL on a cluster, which is a member of the Old Domain (Test Domain). We are able to resolve and
ping both Old Domain and the New domain from this cluster machine. We have created a network share on this cluster, which is accessible to all Domain Users of the Old Domain. Both Domains have two way forest level trust. we are trying to migrate
the ACL of this share (\\ClusterMachine\testshare$) to the new domain using SubInACL. We are trying to run the below command to get it done.
subinacl /outputlog=C:\Users\Administrator\Desktop\Migrationlog.txt /subdirectories
\\ClusterMachine\testshare$\*.* /migratetodomain=OldDomain=NewDomain=mappingfile.txt
Mapping file contains : Domain Users=NewDomain_Users
But we are geeting the Error that "1210 could not find a domain controller for domain "Test Domain". Error finding domain name : 1210 the format of the specified computer name is invalid. Current Object "\\ClusterMachine\testshare$"
will not be processed."

Hello,
how in detail is DNS set up in each domain?
Any problems when using nslookup to verify?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Could not read the profile path for user S-1-5-21-1272265863-3531003469-187

hi
I was doing the installation of the crm702 on MAXDB+WINDOWS.IN THE FIRST PHASE OF EXECUTION(CREATE USERS FOR SAP SYSTEM) I GOT THE ERROR MENTIONED BELOW.CAN SOMEONE HELPE ME :
An error occurred while processing option Enhancement Package 2 for SAP CRM 7.0 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step: Could not read the profile path for user S-1-5-21-1272265863-3531003469-18741865-1021 from the registry: The system cannot find the file specified. .). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:/crmfeb.

Hi,
Delete all keys in registry (regedit) with: S-1-5-21-1272265863-3531003469-18741865-1021. You can do it by find it - F3.
After that restart sapinst.
Regards.

The system could not determin a business area for item 00010

i m getting bellow message while entering stock (MB1C)....
No business area can be deermined for item 000010
Diagnosis : The System could not determine a business area for imte 000010. The item has plant (G001) 7 is assigned to company N001 for which a business area is required. This is caused by incomplete setting in customizing.
Procedure : Before creating the item make sure that you have completely maintened business area assignment in customizing

hi Kartik
Please check whether your company is opted for " business area financial statments" in financial account- global setting of company code. If yes and you want to continue please maintain business area for the plant and material dvision combination under the transaction cde OVF0.
Hope this will solve your problem.

Logon Error:Could not retrieve the source file for Port "Main"

Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciated

Hi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
          <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
          <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
          <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated

HT1386 my iphone says " 33 items could not be synced, see itunes for more information" , where is this information?

I have been syncing my music from my laptop to iphone, no problem until now, a message says " 33 items could not be synced, see itunes for more information", can't find any information that helps me, so, how do I sync these 33 items? help

I have the same problem! I have searched around this site and I can't find anyone who knows.

Itunes sync: 44 items could not be synced see itunes for more information

I have an Iphone 4s, itunes lates version 10.5.1.42 running on 32 bit widows 7 pro.
I was having problems with my music playing on my phone after upgrading from the 4 to the 4s.
My music would just refuse to play at times. One solution I tried was to go into the music tab of my iphone in itunes and uncheck "sync music" in order to remove musice completely; then to recheck it and resync music......my resynced music plays fine, the PROBLEM is itunes refused to sync any of purchased music that i purchased on my prior device!! My phone displays this error: "itunes sync 44 items could not be synced see itunes for more information" yet itunes displays no messages -
I've tried to individually select these songs, albums - make additional playlists...nothing works.
Please help asap.

Were they purchased with the SAME Apple ID you have registered the phone with?

I could not configure a DAQ assitant for any channel

Similar Messages

Maybe you are looking for