I created boolean references in my main vi block diagram and copied them to my sub vi front panel. when wire my reference in my main vi to one the input node of the sub vi the wire is broken. the error says its a class conflict why?

i created boolean references in my main vi block diagram and copied them to my sub vi front panel. when wire my reference in my main vi to one the input node of the sub vi the wire is broken. the error says its a class conflict why?

Expanding and clarifying what BJD said;
After you create the temporary sub-VI that BJD mentioned, open its front panel and copy the reference control that LV created when it created the sub-VI.
This reference control will be correct class etc that you need. Use the control to replace the original control that you were attempting to wire up.
The technique of "create sub-VI...copy" always works for me.
There is one more thing that you should watch out for.
The mechanical action of the boolean can not be set for latch action when attempting to read the value using a value property node.
Trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

  • How to show the front panel when launching VI with Call by reference node??

    Hello!
    I just wonder how I make the front panel visible during execution when I launch the VI with CALL BY REFERENCE NODE.
    Se example.
    Could u also show me how to change different properties (window size ..) of the front panel??? (launched with CALL BY REFERENCE NODE)
    Thank you!
    Attachments:
    test.vi ‏18 KB

    In VI Properties>>Window Apperance>>Customize you can check "Show front panel when called". This will open the front panel on each call. It doesn't matter how the call was initiated.
    You can set a lot of Front panel properties during runtime. Place a Property Node in the block diagram. Change the class from App to VI. Under properties select Front Panel window>>Panel bounds to set the position and size of the front panel.
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

  • Sub vi front panel opens when main vi opens

    When I open my main vi I have one of my sub vi front panels that opens.  I looked in the properties for the sub vi and Show front panel when loaded is NOT checked. Is there something else I need to look at?
    Solved!
    Go to Solution.

    please clarify;
    Q1)
    The sub-VI FP opens when
    You open the top VI but BEFORE you run it
    OR
    The sub-VI FP opens after you start the top level VI
    Q2)
    If the above Q was after you run....
    Is the sub-VI running or paused when it opens?
    If it is puased you may have a breakpoint set in it.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Looking for a way to programmatically set the visible portion of the front panel when a subVI opens

    I am looking for a way to programmatically set the visible portion of the front panel when a subVI opens.  Haven't found any posts that relate, but I'm not sure how to ask the right question.  To be clear, I want to write a helper VI to go through a list of subVIs to make sure the background images are all in the same place when their respective subVIs open.  I hate manually playing with scroll bars before I save each of the VIs...  I'm figuring I need to find the top/left location of the background image (know how to do this already) and then set a VI FP property to  these values or some offset, but I can't find the relevant property. FP:run-timeposition:custom looked promissing, but only affects the location of the window, not the area of the front panel the window is displaying.
    Solved!
    Go to Solution.

    Cool.  Getting closer.  The way I implemented your suggestion affects the subVI only if it is open.  I can use this to do what I'm after, perhaps putting the code into each subVI.  Maybe open all subs, run the helper, and save.    Seems like I'm missing the elegant version...
    My proof of concept code:

  • Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.

    Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.

    Nevermind, I got it working.
    I ended up extracting the new vob within MPEG Streamclip, which gave me an m2v and an aiff audio. I multiplexed those two back together in FFMpegX which gave me a complete VIDEO_TS folder with BUP and IFO files I needed.

  • I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

    I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

    Mail window may be in the Full Screen mode.
    Move the mouse pointer to the top right corner of the Mail window and hold it there.
    Menu bar should drop down and click the blue double arrow icon.
    Full Screen toggle shortcut:  control + command + F

  • IPhoto opens but then the spinning rainbow wheel appears and I can't do anything. I have opend iPhoto with the Option key pressed and rebuilt the library and it still happens.  I want to at least access my photos and copy them to an external drive.

    iPhoto opens but then the spinning rainbow wheel appears and I can't do anything. I have opend iPhoto with the Option key pressed and rebuilt the library and it still happens.  I want to at least access my photos and copy them to an external drive. Anyone have ideas on how to get to them?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    OT

  • HT201250 Can i store my files on time capsule from my ipad, and copy them back, without using itunes to sync the tablet?

    Can i store my files on time capsule from my ipad, and copy them back, without using itunes to sync the tablet? i want to buy an iPad Air and to forget my laptop and i think that even the 128 gb wont be enough some times. I am wandering if time capsule can be used as external hdd and to connect on it via wifi ...

    No. You cannot access your Time Capsule directly from an iOS device. The only way to back up an iOS device is to a computer through iTunes or to iCloud, though in some cases you can open and save files via another cloud-based service such as Dropbox.
    Regards.

  • HT4906 I have just downloaded Mountain Lion but my iPhoto app cannot be launched as it says the original app cant be found. It takes me to where is says its located but its not there.  What to do?

    I have just downloaded Mountain Lion but my iPhoto app cannot be launched as it says the original app cant be found. It takes me to where is says its located but its not there.  What to do?

    Reinstall it?
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • HT201302 I believe I've synced my iphone pics to my pc. Therefore they must be on the pc. Now, without reconnecting my iphone to the pc, i want to access those pics and copy them ek

    The pc. Now, without attaching my iphone, i'd like to access the pics on the pc and copy them elsewhere. How do i do that?

    You import your photos off your phone just like you would from any digital camera.  Where do your pictures go when you import them from your camera?

  • LV 8.5 opens all sub-VI front panels

    Hello,
    Recently I again saw a strange occurrance that has happened to me about 10-12 times over the past year. Here specifically I am using LV 8.5 with the cRIO and FPGA module. When I was running a new RT VI from the developer environment, (deploying to the cRIO) the result looked something like this:
    All the sub-VI front panels are opened, and shown in their reserved or running state.
    None of these VIs are set to show front panel when called or opened, but all are sub-VIs of the top level VI within the project. It seems to have replicated a "Find all VIs in memory, within the project" and then "Show front panel" Invoke. The troubling thing is that this is not really repeatable, when I have closed all the VIs and run the VI again, it is fine. I have seen the same behavior in LV 8.2, 8.21 as well as when deploying to cFP-2120 or when on a Host computer.
    Has anyone else seen this or are there any ideas of what is going on?
    Thanks,
    Mello
    Message Edited by Mellobuck on 12-11-2007 01:17 PM
    Message Edited by Mellobuck on 12-11-2007 01:17 PM
    Data Science Automation
    CTA, CLA, CPI
    SHAZAM!
    Attachments:
    Multiple Windows.jpg ‏117 KB

    Well now that I have seen to image, I recall having seen this myself.
    Like you, it was when I was deploying to an RT target and I was not able to recreate this behaviour.
    It was either an 8.0 or a 8.2 app.
    So all I can do is confirm that you are not alone, but can not offer a solution.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Have a program in which a sub vi front panel pops up when the main vi is loaded

    I have a strange problem. 
    This problem only occures after building an application using LV 8.6 Professional version Application Builder, and I have installed it onto the target computer. It doesn't happen when running the development system. 
    When I load the program on the target computer, one of the subvi's front panels used in the application appears on top of the main vi's front panel. 
    This subvi should never appear on the front panel at any time during the program exicution.  
    It happens to be the Write to Spreadsheet.vi that is part of the standard vi library. 
    I have checked all calls to this subvi to verify that it has not be modified to make it load or appear when the main vi is loaded.
    It is called at 4 different times during the program exicution but in no instance is it set to show the front panel.  
    Has anyone seen this and if so what was the fix?
    Solved!
    Go to Solution.

    Does the exe file run on your development computer without the popup?
    Can you post a VI that demonstrates this behavior?
    You've probably already checked, but there are two places that need setting, the SubVI Node Setup, and the File Proeprties Execution tab. See attached jpegs.
    Message Edited by Pablop on 09-02-2009 02:20 PM
    ~~~~~~~~~~~~~~~~~~~~
    Paul Johnson
    Renco Encoders, Inc
    Goleta, CA
    ~~~~~~~~~~~~~~~~~~~~
    Attachments:
    SubVI Node Setup.jpg ‏13 KB
    VI Properties Execution.jpg ‏32 KB

  • How can I hide the main front panel when I run from the executable?

    Hopefully this is an easy question. I have an application where the front panel is not the main GUI and I would like to hide it when the program runs, but only when it runs from the executable. How can I do this?

    NIquist wrote:
    Yeah, don't do that. Executables built in LV require at least one front panel to be open. If it isn't, the run-time engine automatically closes the executable. I haven't checked recently, but I assume this is still the case.
    Instead, you can set the FP state to minimized (as suggested earlier) or (better) to hidden.
    P.S. one side point - the property and invoke nodes have a shortcut - if you use the Application or VI classes and don't connect a reference, they default to the current app or VI. That means you don't have to open the reference.
    Try to take over the world!

  • I try to open two sub vi front panel in third - main vi front panel.

    I have two sub vi, and I`d like to see this two vi front panel in main vi front panel window. Does anybody can answer me , If it`s possible?

    Click here for a recent related discussion.
    Or have you thought about using a tab control? You can organize controls in pages and have those controls call sub-VIs with or without displaying the front panel of the sub-VI. See the Tab Control Properties.vi example that ships with LabVIEW.
    From any LabVIEW window, select Help from the window menubar, then Find Examples >> Search, then enter "tab control" (without the quotes) in the box labeled Type a keyword to find:

  • My motherboard died but the hardrive is still good. How can I get my old bookmarks and copy them to my new computer?

    My old Gateway laptop died (about 2 years old)but the harddrive is still good. I was able to retrieve all my old info EXCEPT I can't figure how to get to my old bookmarks file so I can copy them into my new computer. I believe. I have tried several forums, but the instructions don't give me the results I need. I am running my old drive with a USB adapter so I can see all my files, but can't get to/find the bookmark file.

    See this: <br />
    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Maybe you are looking for