Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.

Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.

Nevermind, I got it working.
I ended up extracting the new vob within MPEG Streamclip, which gave me an m2v and an aiff audio. I multiplexed those two back together in FFMpegX which gave me a complete VIDEO_TS folder with BUP and IFO files I needed.

Similar Messages

  • How can I convert my Tiger DVD into a CD without spending more money?

    How can I convert my Tiger DVD into a CD without spending more money and time? I've spent over seven hours trying to upgrade an iMac 350 Hz OS 9.1 to Tiger. I have changed the iMac firmware to 4.1.9, but found that my Panther disc was only an OSX Upgrade, although the 3 cds are labeled as Installation Discs. Since I have a Tiger disc I thought I would use that. Unfortunately, my iMac only reads CDs, not DVDs. I tried networking the iMac to my G5, but upon shutdown, the OSX disc cannot be accessed. I copied the DVD files to my iMac hard drive, but again, the OSX disc cannot be accessed after shutdown.
    Is there a way I can burn a CD from the files of my Tiger DVD to get this task accomplished?

    Excuse me, but I never thought of that, nor did I have any intention of trying to rip off your company.
    I purchased four iPods for my family this Christmas. I have six iMacs just sitting around not being used. I thought that I would turn one into an iPod work station, so everyone can use one computer to recharge and hook up to iTunes 7.
    Unfortunately, iTunes does not work very well in OS9. Apple decided not to continue to support OS9 very well. I’ve spent several hours attempting to upgrade the iMac so I could set up iTunes 7. Unfortunately, my 3 Panther Installation Discs were mislabeled, and did not allow me to install OSX over OS9. My OSX 10.2.7 Installation Disc is a DVD, and my Tiger Installation disc is a DVD. Neither usable to update the iMac.
    All I want to do is set up a dumb iMac as a network interface to my G5 because I've use all of the G5's ports for our recording studio and the iPods need external power source if they are plugged directly into the G5.
    If you could show me an easier way to run iTunes 7 on the iMac I wouldn't be as ****** off as I am at Apple for not supporting the 9 older computers I own with usable help and upgrades.

  • How can i update my contacts without spending MORE money on Cloud?

    how can i update my contacts without spending MORE money on Cloud?

    DroidZzz
    Apparently Google keeping a "copy of everything" isn't deterrent enough for you to get another device. Correct me if I'm wrong, but you've posted in the Android forum, indicating you have a Google product.
    Frankly, I could care less about them copying everything. I don't post or type anything online that's incriminating or private anyway. Technically, your ISP has access to anything and everything you transmit or receive through their network, anyway.

  • HT1766 why does my IPHONE 5  say cant back up to Icloud not enough storage. How do I make more storage without spending more money

    Why does my IPHONE5 say cant back up to Icloud not enough storage. Whats that mean? How do I get more storage without spending more money?

    With iCloud you get 5GB of storage for free and you have to pay an annual fee for more
    Settings > iCloud > Storage and Backup > Change Storage Plan
    If you don't want to pay and still want to backup to iCloud you will need to delete data off the device until your under 5GB
    To check if you're under 5GB go Settings > Geneal > Usage
    Hop that helps

  • Is there a way to Configure "Silent Monitoring" in CUCM with the following conditions: ?

    Is there a way to Configure "Silent Monitoring" in CUCM with the following conditions: ?
    -no UCCX platform
    -cisco phone is CP-6941.
    I have read some cisco docs pertaining to Barge and cBarge, however i see that as one-to-one arrangement.
    Is there a way to configure in cucm, something like an ad-hoc conference wherein the Observer will
    just call the extension number to be observed?
    or something like "service observed" feature in Avaya wherein the Observer will dial a particular
    passcode followed by the extension # of the agent, then he is able to observe the on-going call.

    You can do continous recording using SPAN ports or DMS with 3rd party products like Verint Impact 360.
    not sure about the legalities around that though.
    =============================
    Please remember to rate useful posts, by clicking on the stars below.
    =============================

  • Have loaded lion and now cant access office for mac or apple works as it says it does not support power pc applications, how can I acces them or better still reinstate them please

    Have loaded lion and now can't access office for mac or apple works as it says it does not support power pc applications, how can I acces them or better still reinstate them please?

    MS-Office for Mac versions 2004 and older do not run in Lion since these are PPC-apps for which Apple has dropped support.
    Free alternatives to open Word and Excel files:
    NeoOffice http://www.neooffice.org/neojava/en/index.php
    OpenOffice http://www.openoffice.org/
    Or get the 2011 MS-Office

  • Flash player won't work or download. It says it no longer supports power pcs. I am running 10.5.8 on my ibook G4. Seem to have tried everything. i.e. chrome, firebird, archived flash players, etc. All not supported. Any insight???

    Flash player won't work or download. It says it no longer supports power pcs. I am running 10.5.8 on my ibook G4. Seem to have tried everything. i.e. chrome, firebird, archived flash players, etc. All not supported. Any insight??? It started when I tried to upgrade current flash player and it said I needed to uninstall current version, which I did, and then it wouldn't download the current one giving me the not supported story! Please help!!!!!!

    Hi Andy, that is correct, they don't support PPC Macs anymore.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
    Download this if you haven't...
    http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp10.1.102.6 4_and_9.0.289.0archive.zip
    Once downloaded if it doesn't unzip automatically the double click on that file.
    Look for the fp10.1.102.64_and_9.0.289.0archive folder, open it, look for the Flash Player 10.1.102.64 folder & open and look for 101r10264 folder & open it, double click on the flashplayer101r102_64_ubmac.dmg file, choose the Install Adobe Flash Player file to install... they don't make it easy!
    Or smaller here...
    http://dl.dropbox.com/u/450421/flashplayer10_1r82_76_ub_mac%20copy.dmg.zip
    Stand alone player...
    http://dl.dropbox.com/u/450421/LastFlashPPC.zip
    Or free 3rd party...
    http://www.wimpyplayer.com/products/wimpy_standalone_flv_player.html

  • HT4363 my macbook pro has 10.5.8 -can't update to 10.6-which is snow leopard i guess?? anyway of doing this without spending more money..just bought apple tv , got 2 ipads and 2 iphones?? an old mac book pro is stopping my ability to homeshare

    I just bought apple tv......trying to use homeshare-computer won't cooperate.....have 2 i pads, 2 iphones and can not get my macbook pro-(10.5.8) to update to snow leopard (10.6) which is what seems will make homesharing work between all these apple products. It looks like I have to buy some software to update the computer. Anyone else have this issue or suggestions or even know what I am talking about?? try to update software to snow leopard and it won't allow me to...this is an old macbook pro  but I paid almost $3000 for this computer a long time ago...find it hard to believe that I can't update without spending a million dollars??? thanks.  Mary

    Welcome to the Apple community.
    I'm not entirely sure I follow you here, home sharing comes with iTunes 10.2, so far as I am aware even iTunes 10.6.1 only requires OS X 10.5.8 or better. On that basis I'm not sure why you think you have a problem.

  • Is there a way to open multiple files at once with the new download manager?

    It was possible to do this with the old one by right-clicking and selecting "open", but I haven't been able to find a way to make it work with the new one.

    I looked at the download section of the Library dialog, which you can open using either:
    * Show All Downloads
    * Ctrl+j
    I couldn't figure out any way to open multiple items in one step. I can select multiple items, but... no way to launch them. Seems you need to double-click or press Enter to open a single selected item, and repeat for each item you want to open.

  • Is there a way of running cd's"windows" formatted with inf and swf files?

    Is there a way of opening and running CD's 'window' formatted with .inf and .swf files on a mac??

    In your operating system, move the photos to wherever you want them to be (keeping the folder tree structure the same), and then in Lightroom re-link via http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  • I have a new computer which i have down loaded i tunes to is there any way to sync my old laptop itunes with the new?

    i have a new laptop and down loaded itunes to it, is there any way to get the music from my old laptop itunes to this new version?

    See also this migrate iTunes library post.
    tt2

  • Is there a way to use/fix FLVPlayback skins provided with the product?

    Some of the "skins" for the FLVPlayback component cannot be used as delivered in the Flash Professional CS5 package.
    For instance, if you try simply to run the .swf file: MinimaSilverPlayBackSeekCounterVolMuteFull.swf in Program Files/Adobe/Adobe Flash CS5/Common/Configuration/FLVPlayback skins/ActionScript 3.0, you get the following error message:
    VerifyError: Error #1014: Class fl.video::UIManager could not be found.
    Such a skin cannot be used in a published application (though it will work within the Flash IDE in Test mode).
    Not all the skins have this problem. However, at least all of the Minima prefixed ones do. Of course the one I wish to use is broken. Is there a way I can fix this? If I try to publish the corresponding .fla (in FLVPlayback skins/FLA/Action Script 3.0 I get "Warning: unable to load SWC FLVPlaybackAS2.swc".

    Well I don't really understand the position you are taking here. Did you try to run the examples I gave?
    I will be a sport, though, and back up here and explain more fully.
    I had originally built a rather trivial application to experiment with the FLVPlayback component. I did this with AS-3, by the way.
    As I tried different skins I found, strangely, that when I used one of the Minima ones (for instance, the one that I listed several times above), that it would run fine in the IDE in test mode, however when I ran the published application it would not run correctly. It generated instead this error message about the fl.video class not being found.
    In trying to determine the cause of this, I found that this same error would be generated, just by trying to run the Minima skin (swf) in the Flash player by itself. And sure enough those skins that did NOT have the problem with my trivial app also did not generate any error when the swf was run in the Flash player.
    So, as you hopefully can see, I took my application out of the equation here. The question of interest is why do some of the unmodified swf skin files generate the class not found error and can they be fixed (or is there anything I can do to fix them) so that error does not happen. I had even tried to use the original FLA file for the skin (as I described in my earlier post) and recompile it. However that caused a compile error (listed in the original post) that is indicative of some AS2 being mixed in, possibly from some sub-component.
    So I guess all I was hoping for was that you would try to run the AS3 Minima...swf skin listed earlier straight from the product installation. Just run it with the Flash player. If it doesn't generate the error for you then perhaps there is something odd about my CS5 installation, or environment, or ...
    If you don't want to try this, that is your perogative. Perhaps someone else can/will. Or perhaps I can submit this as a bug? (I do not know the mechanism for that)
    I am not trying to be argumentative here. Rather, I have tried to isolate the issue. I don't know how else I can make this clear.

  • Is there a way to regain my firefox sync credentials with the firefox master password?

    I have been using firefox sync since couple of years. I have formatted my laptop recently and since then I had been trying to set up the sync using my earlier account. But I don't remember which email address I gave for this. I remember the master password I used to protect my passwords. Is there a way using which i can regain all my bookmarks? Thank you very much for the help in advance.

    You can have the password reset and have the server send you a new password, but that won't help if you do not have a backup of the sync key.<br />
    Without the sync key you can no longer access the data that is stored on the sync server.
    *https://support.mozilla.org/kb/ive-lost-my-firefox-sync-account-information
    *https://support.mozilla.org/kb/how-do-i-manage-my-firefox-sync-account

  • Is there a way to remove/smooth unnecessary keyframe created with the Audio Mixer write keyframe feature

    In After Effects,  there is a smoother tool (panel)  which removes a lot of in-between keyframes you don't need.  Is there a similar tool (script) in Premiere?  It would make it a lot easier to make point adjustments if you could get rid of the 20 extra keyframes made with the write keyframe.

    No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
    http://www.adobe.com/go/wish

  • Is there any way Apple could trace my lost ipod with the help of its serial number ?

    unfortunately my ipod might have been stolen, there has to be a way apple can trace it with its serial number rite? all products have a unique serial number cant there be a way to trace where it might be under use, what IP address it was last connected to? Ive installed find my ipod/iphone app and activated the application BUT after updating i realized that the settings for it have changed and you have to reactivate the find my ipod option from the icloud setting or something which is SAD! come on apple can obviously help out on this ! or atleast put up a portal for users to trace their product if such a situation arises. I might not be a computer wizard but im sure there can be a way to trace it with its unique serial code.
    I hope apple can do something here!

    There is no way to trace your iPod by serial number. Only via the Find My iPod service can an iPod be located, and if you didn't reactivate it, or the finder/thief deactivated the service (or the iPod is off or not connected to WiFi), then tracing your iPod is impossible. Contact the police, if you haven't already done so, and change any passwords for any online accounts you may have used from your iPod (the iTunes Store, for instance). 
    Regards.

Maybe you are looking for