I desperately need help installing Canon Pixma ip6000D printer in Windows 7 64-bit

My software CD (drivers, etc.) will not work with Windows 7 64-bit. I have tried running it in Windows XP compatibility mode, but it says it is made for 32-bit and will not work with 64-bit. Canon's website says it has an add-on module, but it doesn't have
the printer driver, and it says "Your printer must be installed via Microsoft Update before you download and use this module." I have tried to find a way to install the printer via Microsoft Update, But I can't find any information
about how to do this.
I have also done searches for the canon pixma ip6000d drivers for windows 7 64-bit, but all the results I have seen say that they are an add-on modules.
I would GREATLY appreciate any help with this.

After doing some more digging, I found a solution, and hopefully it will help anyone else who is having problems. Go to this page:
http://windows.microsoft.com/en-US/windows7/Install-a-printer
You can manually install the printer by following these instructions. If the model of your printer does not show (mine didn't), click the update button. It will take several minutes (maybe longer if you have a slow internet connection), but eventually it
will bring up a new list of printers. Just choose your printer and follow the instructions. My printer is working fine now.

Similar Messages

  • Help getting Canon PIXMA MG2520 Printer to Print Wirelessly

    I just got my Canon PIXMA MG2520 printer set up.  Everything worked perfectly.  I downloaded the drive and plugged it in and it worked.  However, I cannot get it to print wirelessly.  With my last printer there was a simple step to get the printer to do this.  Something I checked or unchecked, but I can't remember what that was.  Can someone help please?  Thanks.

    Do you have your printer setup in its setup panel to connect to your WiFi network?
    When you say you plugged it in and it worked, are you saying you used a USB cable to try it?
    If the printer is setup to connect to your WiFi network, you may only need to power off your router, wait a few seconds and power it back on for your printer to be seen on the network.

  • Need help installing Canon network printer on Mountain Lion

    I am trying to install a Canon MF4270 network printer with my Macbook Air running Mountain Lion.
    I added the printer using its IP, and selected the MF4200 driver from the list that came installed with the OS.  The printer worked, but it would not allow me to print double-sided (the option was greyed out). Some research showed that other people with similar problems simply updated the printer driver. 
    I checked the driver version and it said 2.0. I went to the Canon website and downloaded the newest version of the driver, which said 2.43.
    I re-added the printer with the new driver. Same problem.
    So I deleted the driver and the list of associated files, given to me by Canon tech support (I verified then that the MF4200 driver was no longer on the list), then installed the new driver (restarting my computer at every step).  I re-added the printer.
    Now, it doesn't work at all. When I try to print, I get the following message: "Canon UFR II Printer Driver / Cannot communicate with the printer, or the printer is not supported. If the printer is supported, check the printer connection and add it again, then start Printer Utility to get the printer information."
    I tried adding the printer using the Generic PostScript Printer driver, and when I print, it says that it is printing and I get no errors, but nothing prints.
    Now, I can't print at all, and no one at Canon or Apple has been able to solve the problem.
    Please help.

    First, delete the print queue in the Print & Scan preference pane, if you haven't already done so.
    Back up all data.
    Triple-click the line below on this page to select it:
    /Library/Caches/Canon/CUPSCAPT/CCPD/ccpd.conf
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window should open with a file selected. Move the selected file to the Trash. You may be prompted for your login password.
    Recreate the print queue.
    Credit for this solution to ASC user PAHU.

  • How to install canon pixma mx515 printer/scanner with linux mint

    Can someone help me with the installation for my canon pixma mx515 .
    I`am using Linux Mint 17.1
    Best regards
    Jos

    Click the Plus Sign ( + ) in the Print & Scan in Sys Preference.

  • Need help networking a photosmart 7960 to a windows 7 64 bit system from an XP Home 32 bit

    I'm trying to network an HP photosmart 7960 to a wireless notebook with Win 7 64 bit where the printer is connected via usb to a windows home 32 bit computer. Have downloaded vista 64 bit drivers for the printer but can't install them on the windows 32 bit system. Have installed the drivers on the win 7 system but can't locate the inf file when trying to add a network printer. Any help would be appreciated.

    I sympathize with your dilemma.  I have the same situation.  I have a Media Center 2002XP SP3 desktop with 3 printers connected.  Photosmart 7960, PSC 750xi all in one, and a Deskjet 870cse(a vintage 1996).  I just purchased a HP dv7-3188cl notbook WIN7 64bit.  My home network has worked flawlessly for years, with at least 4 wired and 3 wireless computers connected, networking 6 printers. 
    I have resolved my network problems with the printers.  They are connected to the host machine running MC2002 XP SP3.  I tried to install the printers through the network wizard by adding the  printers through WIN7.  Only the 14 year old printer installed successfully.  The photosmart 7960 and PSC 750xi did NOT.  Windows Update could not find the drivers for the install.  None are available on HP website either. 
    After some web research, I have solved my problems. At first, I followed the add printer protocol from the WIN7 laptop.  Error messages resulted and the USB printers would not install   error0x00000214.  The USB printers failed to install while connected to the host XP machine.  The 870cse is on LPT1 and it did network successfully when attached to the host  XPcomputer.
    The drivers needed for the 7960 and 750xi (and probably many other HP printers) will install if you connect the printer to the WIN7 machine and follow the setup.  Windows update will load the needed drivers if they are available.  I sucessfully installed both printers on the WIN7 notebook, printed a test page on each, and printed other docs from the WIN7 notebook while they were connected to the WIN7 notebook.  These drivers are 64bit.  Both printers worked well when connected via USB to the WIN7 machine.
    I then disconnected the printers from the WIN7 notebook and reconnected them to the original host XP desktop.
    With the host desktop running, and the notebook running wirelessly, I went to (on WIN7)  START--Devices and Printers.
    Click ADD A PRINTER at the top of the window, then click LOCAL PRINTER ( NOT network!!!)
    Then in the following Printer port window choose  'CREATE A NEW PORT--SELECT LOCAL PORT amd click next.
    In the Port name box, enter the name of the port, ie the path.  For example if the host machine with the printers attached is named WINXPMACHINE (as named on the network), enter \\WINXPMACHINE\    Then add immediately after that the Printer's name as it is on the XP machine( right click the printer in the Printer and Fax folder on the XP machine, select sharing and find the network share name for the printer).  It may look like \\WINXPMACHINE\Printerx where x is a number corresponding to the printer.  Then click next and OK
    The next box asks to choose the printer from a list.  Select the printer you want to network( I have only done this with HP printers) and click next
    The next dialogue box asks to use the driver currently installed(recommended)--click next -- do NOT replace the driver( it was installed when the printer was directly connected to your WIN7 machine)  Type in the name you want to use to identify the printer on your WIN7 machine.  The printer will install.  Print a test page to confirm installation.
    Original web post I discovered ishttp://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/bd43f9f6-e231-484f-a3b8-e06afeee7...
     Hope it helps. 

  • Need help installing Canon MG6220 using 10.8.2

    Need step by step walk throught on how to install drivers and software.
    Thank You for Your Time and Effort!!!

    OK, perhaps I should have said "drivers are automatically installed in 10.8". The point is that the OP should not have to do any special install process. And actually some drivers are installed in 10.8 even if no printer is connected. I have Canon drivers on my system though I've never connected any Canon printer to this Mac.
    Regards.

  • I need help installing adobe digital 2.0 on windows 8.

    I have windows 8 and when I try to install the install stops and says I need a certain upgrade for microsoft.net.  I go to the page it says and try install said version and get the message that I have a later version already installed as part of my operating system.  I cannot seem to get past this.  Does anyone have any idea what I need to do?

    If you go to Programs and Features what version of the Microsoft .Net framework does it indicate you have installed?  Have you tried repairing or removing and reinstalling your current .Net framework installations?
    Was this computer upgraded to Windows 8?  If so which operating system were you using previously?

  • Need Help Installing Rescue and Recovery 4.3 Windows 7

    Hi there,
    So I'm having a strange issue installing Rescue and Recovery 4.3 on my TP T61.  I keep getting an error message stating: "It is required to install the Microsoft Visual C++ 2005 Redistributable (x64) Service Pack 1 before you install the Rescue and Recovery program."
    I have already installed C++ SP1.  I've also tried installing/uninstalling it as well.  Still no luck!
    Here is a link to the installer:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73612
    And here is a link to the C++ SP1 file:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=200b2fd9-ae1a-4a14-984d-389c36f85647&displa...
    Any Ideas?
    Thanks,
    Peednus
    T61
    T7100 @ 1.8 GHz Duo
    2GB RAM
    Windows 7 Home Premium (x64) (Clean Install)
    T420s, i5-2520M @2.5, nVidia 4200m, 8GB DDR3, OCZ Vertex 3 Max IOPS 240GB SSD, Hitachi 320GB @7200rpm ulrabay, 8Pro x64
    T61, Centrino Duo @1.8, GM965, 4GB PC2-5300 DDR2 @667MHz, OCZ Agility 120GB SSD, 7Pro x64

    Hi peednus,
    The C++ 2005 SP1 installer you are trying to use is for x86 (32 bit).  The error message you quote says it needs the x64 (64 bit) version.  Try
    Microsoft Visual C++ 2005 SP1 Redistributable Package (x64)
    If you're really running a 64 bit Windows install, that should/might get you going.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Can't reinstall canon pixma ip4200 printer on xp sp3 32-bit computer

    Lost capability to print with my IP4200 printer XP SP3 32-Bit computer...
    Tried another forum with question:
    1. Can't print...
    2. Went to Printers and Faxes but no printer (IP4200 only printer) shown.
    3, Tried to ADD Local Printer but Wizard stopped with message that "Specified Port not Known".
    4. Went to Port windows and tried to ADD port but I couldn't so tried to CREATE but I couldn't do that  -- the screen seemed to frozen in time.
    5. I uninstalled all canon printer IP4200 software/drivers and reinstalled them with no change to trying setup the printer with the xp computer.  I do get a flag in the right bottom corner saying something like "You have new hardware awaiting installation".
    RESPONSE: Goto canon support website and read all manuals/brochrues then download them all printer software/drivers, and try to setup the printer again.  No different results from the first time...now I am here asking the CANON Forum for help!!
    Something is NOT letting me configure printer ports.  I looked at the Harware and have not yellow flag and properties say Device is working properly.  Help, and thanks in advance.
    FLJerry

    Hi FLJerry,
    So we can better assist you, please reply with the following information:
    1.  Is your printer plugged directly into a USB port on your computer, or into a USB hub or other device connected to your computer?  If into a hub, if you plug it directly into your computer, is it able to be installed successfully?
    2.  Do you have another USB cable you can use to connect the printer to the computer? 
    3.  Do you have the USB cable plugged into a USB port on the front or back of your computer?  If into a front USB port, if you plug it into a back port, does the printer install successfully?
    4.  If you temporarily disable any antivirus or firewall software that is on your computer and then attempt to reinstall the printer, are you ble to install it successfully?
    We look forward to hearing from you!
    If this is a time-sensitive matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Canon Pixma MP970 Printer - Need Help Installing on 10.9.3!

    I have a Canon Pixma MP970 printer that I cannot get to work on my MacBook Pro running OS 10.9.3! I had no issue running it on the initial release of OS 10.9, but now it is making me pull my hair out!
    I recently wiped my ssd and reinstalled OS X from the recovery partition and this is when I began encountering the issue. I went to the Canon website and there are no drivers provided because it says they are already contained in OS 10.9 (and the Canon website already detects my OS). I have plugged the printer into my MacBook Pro using a USB cable and running software update (to make sure any drivers are downloaded) and there is no download. I have tried entering the printer IP address manually and still nothing.
    I am out of options unless a kind soul on these forums can light the path for me. Is it possible this printer is no longer supported after an incremental OS update?
    Printer: Canon Pixma MP970
    Connection: Home network, wired LAN to router (printer itself already configured for network, and was working before ssd wipe)

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Thanks

    Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Apple support says I have to pay £85 for to help me. Thanks

    Just a word of advice. Never ever use the word "urgent" on this forum

  • I deleted aperture and now my sistem is acting crazy. I desperately need help fixing it.Can anyone help me please?

    I deleted aperture and now my sistem is acting crazy.The dock disappeared and almost all icons are gone except for their names.I have an important project for tomorrow and I desperately need help fixing it.Can anyone help me please?

    Well it all started with Aperture 3 trying to import some photos from my iphone.It took ages to import those photos and like I was in a hurry to finish my work in Illustrator so I tryied to force quit on A3 and it didn´t, so I shut down the computer and started over.it was all ok but I uninstalled the A3 and the I realized the icons were back to original form and a few fonts changed.so I Installed the trial version of A3.I did a restart of the system and then there was.aperture lauching but no dock and a 80% of the icons disappeared, but the names of the files and folder remained.and I cand acces the apps from the apple sign on the left corner.I tried also restarting a few time but it´s always the same.I am a recent user of a mac , and please excuse my bad english.If this is in any way useful please help me!

  • Installing Canon PIXMA MG3170 to my MacBook Pro (OS 10.8)

    I'm trying to install my new Canon PIXMA MG3170 printer to my MacBook Pro. I am aware that the bundled software isn't compatible to OS 10.8, and after endless research through this community, I came across several solutions.
    I installed it via IP address with HP Jetdirect - Socket protocol and used Canon MG3100 series printer driver. Apple was able to found the software update required for this version and the supposedly latest printer driver is installed. But the following message pops up:
    "An error occurred while trying to add the selected printer. Unable to communicate with the printer at this time."
    HELP ME! spent 2 hours of resets, deleting .plist files, etc.
    This is how the screen looks at the moment:

    naysilladay wrote:
    I'm trying to install my new Canon PIXMA MG3170 printer to my MacBook Pro. I am aware that the bundled software isn't compatible to OS 10.8
    But the 10.8 printer driver is available from Apple via Software Update. And looking at your screen grab you already appear to have it installed.
    naysilladay wrote:
    I installed it via IP address with HP Jetdirect - Socket protocol and used Canon MG3100 series printer driver. Apple was able to found the software update required for this version and the supposedly latest printer driver is installed. But the following message pops up:
    "An error occurred while trying to add the selected printer. Unable to communicate with the printer at this time."
    You cannot add the printer in this manner. The driver does not support this type of connection, so that is why you are getting the error message. If you want to use HP Jetdirect-Socket as the protocol then you would have to use an alternate driver, such as Gutenprint or PrintFab.
    For the Canon driver, you must add the printer using the Canon IJ Network protocol. When you click the plus button in Print & Scan to add and have the Default view selected instead of the IP view as you have shown above, does the MG3170 appear in this view? Usually its scanner component will appear first, showing Bonjour in the Kind column. If you wait several more seconds, the printer component should also appear, showing Canon IJ Network in the Kind column. Do you see this?

  • I desperately need help with Mail, specifically sending

    For Starters:  I am on OSX 10.9.2 and am trying to use mail 7.2.
    https://discussions.apple.com/post!input.jspa?container=2998&containerType=14&qu estion=I+desperately+need+help+with+Mail%2C+specifically+sending
    I cannot send.  I have been at this for hours and hours and hours.  Here are the details.
    my mail server however is s1.sistercompany.net
    I can receive email just fine.  I can also send mail just find having set this up on my iphone and also in thunderbird (which i hate hate hate hate hate hate hate, which is why I am desperate to set up mail)
    The settings in thunderbird are as follows:
    Servername: s1.sistercompany.net
    port: 465
    Authentication method:  normal password
    Connection Security:  SSL/TLS
    However, I just can't get this to work in Mail.  When I write an email and hit send I get a popup that says:
    Cannot send message using the server s1.sistercompany.net
    The certifcate for this server is invalid.
    Now, my tech guy says yeah the certifacte is invalid because you are going through sistercompany server, there should be some way to just accept the certifcate anyway (but he has never used mail before).
    So I have serached around and come up with this: http://support.apple.com/kb/PH11706
    Which tells me to use the verify certificate dialogue, which I would do except there is no verify certificate dialog.  Any thoughts?
    <Email Edited by Host>

    I don't have a problem watching the Lost episode on abc.com, using a stock MacBook with 512MB RAM. I don't know what technology abc.com uses in their viewer, but I have Flip4Mac and the latest version of Flash player installed.

  • I installed Canon Pixma MG5520, since, always get "canon quick menu has stopped working" how do I fi

    I installed Canon Pixma MG5520 on win 7, since, always get "canon quick menu has stopped working" how do I fix please?

    Hi thaluza,
    We can see if there are files in a folder called TWAIN_32 other than those related to the printer that may be causing a conflict with the Quick Menu. If there are, we can temporarily remove the files to see if this will resolve the issue.
    To move the non-Canon Twain files from the Twain_32 folder, please follow these steps:
    1. Go to Computer / My Computer and locate the C: drive, then double-click on it to open.
    2. Locate the WINDOWS folder, then double-click to open it.
    3. Locate the TWAIN_32 folder, then double-click to open it.
    4. Inside of the TWAIN_32 folder, you will see a folder for your printer as well as a WIATWAIN.DS file. If there are other files in that folder, you will want to move them to another location, preferably your Desktop by doing the following:
        4-1. Click on each of the other items in the folder other than the the WIATWAIN.DS file and the folder for your printer to select them. You will want to hold the the CTRL key on your keyboard while selecting each of the items until all of the items except for the two referenced above are selected. Please be sure to leave the WIATWAIN.DS file and folder related to your printer inside of the TWAIN_32 folder.
        4-2. With all of the items you want to move selected, please go to the EDIT menu and select the CUT option.
        4-3. Go to your Desktop (main window that comes up when you start Windows with all of the icons on it) and right-click your mouse in any blank area, then choose the PASTE option. The items you selected from the TWAIN_32 folder should appear on the Desktop.
    5. Try to launch the Quick Menu again.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for