I did a factory reset on my ipod touch, but now when i try turning it on it just goes to the apple screen with the loading sign

i did a factory reset on my ipod touch but now when i try turning it on it just goes to the apple screen with a loading sign, ive let my battery die and tried reconnecting but it still wont work. it doesnt even come up on itunes.

Why won't it let you sync?  What happens when you try to sync it? Any error messages from iTunes?  How is your iPod configured to sync music from your iTunes library?  In other words, what options do you have selected from under the iPod's Music tab in iTunes?  To access this tab, plug your iPod in, select it under Devices in the left hand pane of iTunes, and over to the right locate and select the Music tab along the top.
Or are you trying to manually manage your iPod's contents?  In other words, is the Manually manage music and videos option enabled from under the iPod's Summary tab?
B-rock

Similar Messages

  • My ipod, while it is charging, will have the apple screen with a loading sign that never moves and there is no way to turn it off, or take out the battery.... help me.

    Help me, my ipod is freaking out! It has the apple screen with a white loading sign that never moves. After about 19-20 seconds it flicks to my lock screen but i can't do anything with my lock screen and then it flickers back to the apple sign... WHATS GOING ON?!?!?!?!

    Try here.
    iOS: Not responding or does not turn on
    If necessary,let the battery fully drain and then charge and try again.

  • I selected restore factory settings on my ipod touch but now after restart it stuck on apple icon what will i do anybody help me out plz,even it's not appering on itunes on my p.c

    i selected restore factory settings on my ipod touch but now after restart it stuck on apple icon what will i do anybody help me out plz,even it's not appering on itunes on my p.c

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • I did a factory reset on my iPod Classic, and now it won't sync to any computer!

    I've reset it about 5 times tonight.
    I was only tryingto update it, and sync it with my laptop, as opposed to my parents computer.
    Why won't it let me do update it with my laptop's iTunes library? I understand that all of the music would have to be erased and whatnot, but my iPod will not sync at all!
    After I restored it, I decided to try and resync it to my parents computer instead, and it still won't let me!
    help me please

    Why won't it let you sync?  What happens when you try to sync it? Any error messages from iTunes?  How is your iPod configured to sync music from your iTunes library?  In other words, what options do you have selected from under the iPod's Music tab in iTunes?  To access this tab, plug your iPod in, select it under Devices in the left hand pane of iTunes, and over to the right locate and select the Music tab along the top.
    Or are you trying to manually manage your iPod's contents?  In other words, is the Manually manage music and videos option enabled from under the iPod's Summary tab?
    B-rock

  • I reset my whole ipod touch but now it freezes when it tries to upload the home screen

    please help! idk what i did

    - First reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - If still problem,  connect the iPod to your computer. If iTunes sees the iPod restore the iPod via iTunes.
    - If iPod not shown in iTunes, see if placing the iPod in recovery mode will allow it to show in iTunes so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    If it still cylce one and off, disconnect the iPod and let the battery fully drain. Then charge and try again.

  • HT5731 How do I make my Ipod touch work? When I try to purchase songs it ask me for my apple ID  password it tells me its wrong. I have reset it and changed it but it still wont work. Help!!

    Somebody Please help me to get my stupid Ipod to let me download music I just put a 15 dollar card on. I don't want to waste it.

    Can you go to Settings>iTunes and App Store and signout and sign back in?

  • I tried to soft reset my ipod touch with the top button and the screen button.  it turned off and went to the blue screen with the apple.  now it won't do anything-it has stayed on that scren for 4 hours now.  does anyone know how i can fix this?

    i tried to soft reset my ipod touch with the top button and the screen button.  it turned off and then went to the blue screen with the apple like it should.  however, it now just stays on that screen.  it has a sort of clock looking thing at the bottom of the apple that does not move either.  it has stayed on this screen for over 4 hours.  i also can not hard reset it in itunes.  i am not really goood at this sort of thing.  does anyone have this problem or a possible solution?  thanks

    See Here for
    Frozen or unresponsive iPod touch
    The Basic Troubleshooting Steps are:
    Restart..  Reset..  Restore...
    Try this First... You will Not Lose Any Data...
    Turn the iPod Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... (But can take Longer...)
    Release the Buttons...
    Turn the iPod On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • My iPhone shut down and factory reset itself for no reason, and now when I plug it into my computer or any power source, the apple shines but it doesn't get any further than that. How can I fix it?

    My iPhone shut down and factory reset itself for no reason, and now when I plug it into my computer or any power source, the apple shines but it doesn't get any further than that. How can I fix it?

    Try Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • Radio no long works on 7th gen. it seems to load then shut down to the black screen with the apple on it. have tried resetting ipod - didnt work. thank you.

    radio no long works on 7th gen. it seems to load then shut down to the black screen with the apple on it. have tried resetting ipod - didnt work. thank you.

    Try the other suggestions here:
    iOS: Troubleshooting applications purchased from the App Store
    Then try a restore.

  • I changed my ipod password and now when i try to unlock my ipod it says wrong password. Is there anyway i can get into my ipod without restoring it?!?!?!?!?!?!

    I changed my ipod password and now when i try to unlock my ipod it says wrong password. Is there anyway i can get into my ipod without restoring it?!?!?!?!?!?!

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • My 5th generation iPod (bought in April of 2013) will quit unexpectedly. It will take for ever to load what I write while texting. It also just goes to the black screen with the Apple logo. I'm not sure what to do.

    My 5th generation iPod (bought in April of 2013) will quit unexpectedly. I can't do app store apps (like snapchat or facebook, ect.) or apple apps (like Camera, Safari, ect.)It will take for ever to load what I write while texting. It also just goes to the black screen with the Apple logo. I'm not sure what to do.

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy...
    Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
    If the issue persists...
    Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    More Tips here...
    http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    Note:
    Also consider Deleting any Apps you have Purchased / Downloaded but you now never use.

  • After a reset of settings on IPad2 it turns "on" but i only get to the logo screen with the progress bar under it. so it turns on to logo then to progress bar screen then off. and repeats over and over

    Well as I said in the "question", I did a reset of the settings on my IPad2. however when it powered back on from resetting. it lets the the logo screen with the progress bar under it. The progress bar gets about 1/4 of an inch from the left then stops. After a few mins Ipad shuts off then turns on to the logo screen, then goes to the logo/progress bar screen, does whats said above, then off. That cycle just repeats over and over. Any help with this would be appreciated.

    Recovery Mode Step by Step
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    On Computer
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. iPad Recovery Mode on computer screen
    8. Select "Restore iPad"...
    9. Select "Restore and Update"
    10. Extracting Software.
    11. Preparing iPad for restore.
    12. Waiting for iPad.
    13. Verifying iPad restore...
    14.Restoring iPad software.
    15. Verifying iPad software.
    16. Verifying iPad Restore...
    17. Restoring iPad firmware...
    18. Your iPad is restored to factory settings; keep iPad connected to computer
    19. Activate iPad
    20. Enter Apple ID and Password
    21. Continue
    22. Welcome to Your New iPad
    (a) Set up as new iPad   (b) Restore from this backup (select from list of backups)
    23. Restore from this backup
    24. Continue
    25. Restoring iPad from backup
    26. The settings of your iPad have been restore; keep iPad connected to computer
    27. Syncing iPad (Step 1 to 5)
    28. Preparing apps to sync
    29. Copying 1 of 9
    30. Sync apps, movies and music to iPad
    31. Finishing syncing
    32. Eject iPad

  • I turned off my iPod touch and when I tried to turn it back on, it won't load and just sits on the black screen with the Apple logo.... HELP!!!):

    I turned off my iPod touch and when I tried to turn it back on, it won't load and just sits on the black screen with the Apple logo.... HELP!!!):

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    Restart / Reset
    http://support.apple.com/kb/ht1430

  • I have an ipod touch 2nd generation. I'm doing a restore and deleting it keeps showing apple screen then skull apple screen and it keeps doing it that for 12 hours not. How do i fix it to stop it

    i have the 2nd generation ipod touch. i wanna to restore to factory settings but i couldnt do it through itunes. So i went in the settings to rest and delete. it keeps loading the apple screen and the apple turns to a skull and keeps repeating the screen for like 12 hours or more now. how do i fix it?

    The skull indicates that the iPod is jailbroken
    Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?

    I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
     Cheers, Tom

Maybe you are looking for

  • Link subreport to the main report in Crystal

    Hi expert, I have a Crystal Report with a row that cointais a Total Field. Is possible to add a hypertext link, that open a subreport with all the details? Exaple: CardCode: C00001 Account Balance: 14120,50. If i click on the Total of account balance

  • HT3737 how do you cut and paste on an iMac

    how do you cut and paste on an imac

  • Need to call SET ROLE for Oracle before running report

    Hi all, does anyone know how I can call SET ROLE for Oracle with Crystal Reports, before running report? I'm using Crystal Reports 2008 to design report (with Server Oracle connection) and Java Reporting Component to run report within a J2EE apllicat

  • No available encryption algorithms in my ASA

    Hi all, I have a cisco asa 5510 running ver 8.02, when i navigate to "remote access vpn-> advanced->ssl settings" i could not see any available algorithms under encryption section. How can i add the encryption algorithm in? I need the encryption algo

  • Photos from ipoddy to lappy

    hello, i have a windows comp, and my friend has a mac. i took my nano over to his mac and uploaded some photos onto my nano. however, rather than saving the photos in a file on the harddrive, i reconfigured the nano to his mac, so that i could look a