I did an update and know I can't get into my contacts it crashes back to home screen won't sync because it says contacts are open

I can't sync my contacts with my computer because it says contacts are open but they aren't. I updated my phone and have had problems ever since.

iOS: Unable to update or restore - Support - Apple

Similar Messages

I clicked on full screen option and know I can not find the options tab to go back to regulator screen

I clicked on full screen option and know I can not find the options tab to go back to the regulator screen

The F11 key will toggle full screen mode.

I was updating app and they froze and never finished the update and know I can't delete neither used the app, how can I resolve this?

I was updating app and they froze and never finished the update and know I can’t delete neither used the app, how can I resolve this?

Hi Franklin
Thanks for your email. I already have done that and not resolve. I try in the iTunes to delete the app in the iPhone and then install again but that not resolve.
Thanks for your help,
Ricardo O. Nunes

HT6114 I did update and now I can't get on laptop? Just keeps rebooting saying there is a problem.

I did update and now I can't get on laptop? Just keeps rebooting saying there is a problem.

Beginning with Firefox 4, Macs must have an Intel x86 processor ('''''yours is a PPC Mac''''') '''''<u>and</u>''''' OSX 10.5 or higher ('''''which you do not have''''').
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8] [https://www.mozilla.org/en-US/firefox/9.0/system-requirements/index.html Firefox 9]
'''''The good news''''' is that Firefox 3.6.x still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.x: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs with OSX 10.4.11 and OSX 10.5.8. Firefox 9 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/ReleaseNotes90
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from the we sites, which did not work and now I can not get the computer to reboot the gray screen comes on and if a shift c I get a load bar and it goes half way and help

I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
I did the following:   mount -uw /    rm/var/db/.AppleSetupDone    shutdown/uses/us reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda Markle

You did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.

I did an upgrade and now i can't get the bookmarks back in Safari like they used to be

I did an upgrade and now i can't get the bookmarks back in Safari like they used to be. How can I get contacts back in the bookmarks. Also, why does Apple always change everything? Very frustrating.

Unforunately, not that I know of.
Apple - Safari - Feedback

HT201210 I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

Your only option is to connect your iPhone to your computer via USB (as the diagram indicates) and restore using iTunes.

My ipad was accientally turned off whilst it was updating and now I can't get it to start up.

Hello there,
My ipad was accientally turned off whilst it was updating and now I can't get it to start up. Please can anyone help?
Thanks

Try a force-restore:
1. Launch iTunes but do not connect the iPad.
2. Hold down the iPad's Home and Sleep buttons at the same time. This will force the screen to fade and the Apple Logo to reappear. KEEP holding the two buttons down until the screen goes black.
3. Once the screen is black, release the Sleep button but keep holding down the Home button while you plug the cable into the iPad. Contunue holding the Home button until the you see the iTunes logo and the picture of the cable on the screen. This may take up to 30 seconds.
4. iTunes should now detect the iPad and you can perform a Restore.

I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

I'd say your sister messed up and your iPod is toasted.
Think about it... She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer...
Also take into consideration how old is your sister, and how much does she know about electronics?

I somehow installed a version of Firefox which won't work on my "old" iMac G5 (10.5.8) so I trashed the program and now I can't get it out of my trash bin... Any help appreciated because now I can't empty my trash at all! Thanks.

I somehow installed a version of Firefox which won't work on my "old" iMac G5 (10.5.8) so I trashed the program and now I can't get it out of my trash bin... Any help appreciated because now I can't empty my trash at all! Thanks!!

You must purchase a new QT key for each computer.
Since you have a new iMac, you are entitled to 90 days of FREE phone tech support from Apple and you can use the Chat with a Support Agent. The online chat support _*is available 24 hours a day, 7 days a week.*_
If you've purchased an AppleCare Protection Plan, you're eligible for the duration of that agreement.

I got locked out of Mac os 9 and now I can't get into OS 9 or OS X. All I see is the Macintosh SE and a finder face and text that says "mac os 9.2 welcome to mac os". I can't get into COntrol Panel to reset the password to allow me to get in.

I got locked out of Mac os 9 and now I can't get into OS 9 or OS X. All I see is the Macintosh SE and a finder face and text that says "mac os 9.2 welcome to mac os". I can't get into COntrol Panel to reset the password to allow me to get in.

Do you have OS X and OS 9 installed on your Mac? If so, startup with the Option key depressed. This will open the Startup Manager window. Select the OS you want to start from & click the right arrow.
 Cheers, Tom

I sold my iPhone 4s and the buyer can't get into it without entering in my apple ID, is there a way to bypass this?

I sold my iPhone 4s and the buyer can't get into it without entering in my apple ID, is there a way to bypass this? I have deactiviated via my laptop but not on the device itself, i also restored the iphone to its factory settings.

"is there a way to bypass this?"
Only by you eitehr giving the new user your iCloud username and password or by you getting the phone back and entering it yourself.

Just loaded the ios6 and now i can't get into itunes store with my 4s. What happened?

Just loaded the ios6 and now I can't get into itunes store with my phone. What happened?

Just loaded the ios6 and now I can't get into itunes store with my phone. What happened?

How deactivate Web premium CS4 when I can't get into my old computer (crashed)?

Hi,
At Adobe's website it says:
"What happens if my computer is stolen or damaged and cannot be repaired?
If your computer is stolen, damaged beyond repair or the hard drive is completely re-imaged, the activation will be lost. In either case you can install and start using the Adobe product on your new computer, which will automatically detect the problem if you already had two computers activated. The activation process will guide you through the new activation, even if the prior computer is no longer available."
My computer has crashed but Adobe has not detected this, so I can't install my program on my new computer. What do I do?
Thank you for answering! :-)
//Milda

Hi!
There was no problem installing it on my new computor, but it says that i have to deactivate my earlier installation (within 30 days) since i have already installed it on two compters (i need to have the program on both my lap top and my stationary computer)
Milda
Skickat från min iPhone
7 jun 2012 kl. 14:07 skrev "Bob Levine" <[email protected]<mailto:[email protected]>>:
Re: How deactivate Web premium CS4 when I can't get into my old computer (crashed)?
created by Bob Levine<http://forums.adobe.com/people/BobLevine> in Creative Suites Windows - View the full discussion<http://forums.adobe.com/message/4472862#4472862

I did an update and know I can't get into my contacts it crashes back to home screen won't sync because it says contacts are open

Similar Messages

Maybe you are looking for