I don't understand correlation between ACL and dACL. If dACL is downloaded to the Catalyst switch what is the status of the ACL

Understanding ISE and dACL.
I don't understand correlation between ACL and dACL.
If dACL is downloaded to the Catalyst switch what is the status of the ACL attached to physical port. Is dACL appended to the existing ACL? When I typed ‘sh ip access-list int fa0/1’ I can see only dACL for access domain and dACL for voice domain appended to the previous dACL and no ACL lines.
Regards,
Vice

Hi,
Downloadable ACLs (dACL) are applied from your RADIUS server based on authentication and authorization policies. It overrides any standard interface ACL.
Standard interface ACLs are in place to limit traffic on the port before 802.1x or MAB authentication.
When an authenticated session terminates on the interface the standard ACL will be re-applied until the next authentication.

Similar Messages

I don't understand relationship between ichat and mobileme (or google talk)

Hello,
I don't have a mobileme account and I am using ichat just fine. The documentation says you need a mobileme account, so I'm confused. Also, my ichat on my desktop seems to be a mirror of my google talk -- the chat that shows up on my google mailbox page.
Can someone just explain the basic relationships here?
Not getting any younger,
thanks!

I don't have a mobileme account and I am using ichat just fine. The documentation says you need a mobileme account, so I'm confused.
You need a MobileMe or AIM account to use the MobileMe/AIM service. Google Talk and Jabber accounts use a different service.
Also, my ichat on my desktop seems to be a mirror of my google talk -- the chat that shows up on my google mailbox page.
If your Google account is active and logged in with iChat, you will see the content of Google Talk in iChat.
(36765)

Correlation between floorNumber and floorRefId

Hi guys,
we are working with MSE from some time and few days ago an interesting issue appeared.
Do you know what is the correlation between floorNumber and floorRefId?
As we receive info about the maps from MSE API, it returns the value of the floor 'floorNumber' i.e. it gives us 2.
But after we've subscribed for notifications MSE API returns the users location including 'floorRefId' i.e. 'some long number'.
So the issue is to find the correlation between those two numbers to find out on which floor of the building the user is currently being located.
Any ideas? The best way would be to get it from the MSE with the map infos but I couldn't find how to do this.
Thanks in advance
Regards

i have the exact same scenario as you. When its 100% charged, WIFI works perfect. Start to go bad once its no longer 100%. And became worst at 90%. I hope apple is reading this and fix this asap.
EDIT: just FYI my iPad is WIFI + 4G (AT&T) 32GB Black.

How do I port my Windows Word, Excel, and Powerpoint files to the MAC? What software is needed on the MAC to use them? Thanks.

How do I port my Windows Word, Excel, and Powerpoint files to the MAC? What software is needed on the MAC to use them? Thanks.

You can certainly use iWork, though I hesitate to recommend it to a seasoned Windows user simply because it would add another level of the unfamiliar with which you would have to gain familiarity. The iWork applications are certainly very competent and in most respects both easy to use and surprisingly powerful. They are not 100% compatible however, though that typically manifests itself in document formatting issues rather than anything more significant.
I have never attempted to import emails from a Windows system into MacOS - other than in Outlook connected to an Exchange server, thus not really an issue at all. I doubt that the Mail app in MacOS can import directly, but of course you could always set the account(s) up on the Mac and then forward emails you want to keep from the PC. Not elegant, but it works. Virtually any Windows document or file, whichever application created it, can be opened or converted for use on a Mac, and using both systems on my desk each day I rarely see any issues switching stuff from one machine to the other. You may stumble over one or two issues, but likely not significant.
In switching platforms there will be some inevitable issues, not so much with being able to import your stuff because there's usually a workaround or a utility that can help, but just with getting familiar with the platform and the differences between Windows and MacOS that can obscure their similarities. From time to time the support community here hears from a user who has found the migration very problematic and regrets it, but for the most part the phrase 'I should have done this years ago...' is rather more prevalent!

I am using a PC and when I try to download an ebook, I get a pop up prompt with the message `Error! Check Activation` - how to resolve this so I can download and view the ebook, thank you

I am using a PC and when I try to download an ebook, I get a pop up prompt with the message `Error! Check Activation` - how to resolve this so I can download and view the ebook, thank you

Hi Ablondel24,
I understand that you are getting a 404 message when you access a website from a Mac, not a PC.
First check the cache for the site:
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Second try to [[Delete cookies to remove the information websites have stored on your computer]]
Let us know if this solves the issues you are having.

My macbook has Itunes and I am trying to download some songs that I bought on my Ipad onto the macbook. It has worked in the past, but one song has been downloading for the last day. No more will download it seems stuck downloading.

My macbook has Itunes and I am trying to download some songs that I bought on my Ipad onto the macbook. It has worked in the past, but one song has been downloading for the last day. No more will download it seems stuck downloading. I don't need the song. But I want the others to download.

Hi there,
You may find the information in the articles below helpful.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
-Griff W.

I rented a movie on my iPad that stopped downloading in the videos app and when I tried to download it again it said I had to go to the iTunes Store but there were no downloads there. How do I get my movie to work!

I rented a movie on my iPad that stopped downloading and when I tried to download it again it said I had to go to the iTunes Store but there were no downloads there. How do I get my movie to work!

What is your current connection via speedtest.net
Make sure DNS is set to auto (settings - general - network)
If on wifi try ethernet

I made un update for OSX-10.9.2. , and when a scan a document or a picture, and order `save as` , the file saved is a black picture or document. I can't see the file. What happens? I made the downloads of files required in HP site. Tks, Paulo

I made un update for OSX-10.9.2. , and when a scan a document or a picture in one printer HP D-110, and order `save as` , the file saved is a black picture or document. I can't see the file. What happens? I made the downloads of files required by HP for the OS maverick in HP site.
Tks, Paula

This link should help:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/OS-X-10-9-Mavericks-Incor rect-output-using-HP-Scan/td-p/3069079

My general update and Facebook updates never finish downloading-just keep spinning. What can I do?

My general and Facebook updates never finish downloading-just keep spinning. What can I do?

My general and Facebook updates never finish downloading-just keep spinning. What can I do?

HT201240 I forgot my administator password for settings so i cant do pretty much anything and when i go to download something on safari then it says you dont have the permission to use this application and then it says for more imformation contact account

I forgot my administator password for settings so i cant do pretty much anything and when i go to download something on safari then it says you dont have the permission to use this application and then it says for more imformation contact account creator

Hello valertinker,
You may want to contact our Account Security team if you're concerned about the security of your Apple ID.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Allen

I can't don't understand code in netbean and it's about Jframe.

i use netbean to design 2 jframe with some buttons on both frame.
frame1 is login form, frame2 is mainform. i want to show loginform then click the button1 to show 2nd jframe.
then i click exit on 2nd jframe and it come back to loginform(frame1).
i do alot of search on the google and here. i know the basic to show a jframe using
setVisible or .show() .hide(), etc..
the problem is what is my jframe variable name in netbean?
i know i can create an jframe object
such as: JFrame frame1 = new JFrame(); etc.. (it's ok if the syntax is wrong for now).
When i use netbean, i drag the Gui components to the Jframe. The jframe is generated by netbean automatically.
When the main program runs, it calls main() method, follow by :
public void run() {
new LoginForm().setVisible(true);
new LoginForm().setVisible <--- setVisible(true) means show the form.
and is new LoginForm() create an object from LoginForm class.
public LoginForm() {
initComponents();
When it create a new object, it runs default constructor and calls iniComponoents and finally show the jframe.
my question is when you create object, you usually declare variable and use variable to hold reference to the object.
that's why i don't understand how it works here.
it only create news object, bu no variable to holding it. how do i control this Jframe to show and hide without a reference variable????????????
Edited by: roadorange on Feb 29, 2008 10:08 PM

roadorange wrote:
Encephalopathic . thank your reply so much. your reply is fast. i love it and love this forum.. LOLyou're welcome
i tried hand-written code, and it looks just fine when design few buttons, labels and textfields.
The adjustment of buttons(labels) are not that good on the frame.
However, when you use IDE, you can drag the button on any spot you like in the jframe.... and in the process not learn how Swing works, and lose flexibility and power. Sorry to sound conceited, but I'll match any of your netbeans-created GUI's with one of my own, and mine will likely be better -- and I'm not all that good at this just yet.
Much luck.

Correlation between namespace and add-on software component?

Hi
I need answers for the following questions
1. Is namespace a unique identifier for an Add-On software component?
2. Does the SAP system identify ABAP add-ons "only" based on the namespace? Post installation of an add-on, in the system status one finds the namespace in the list as installed software component.
3. If the above is true, this means I cannot have multiple add-on software components under a single namespace. Is this correct?
4. Could you explain in detail the correlation between namespace, add-on software component, add-on software component version and associated development objects?
Thanks!

Here you go:
Installations and Upgrades --> Entry by Application Group" --> SAP Solutions for Governance, Risk, and Compliance"
--> SAP GRC Access Control --> SAP GRC ACCESS CONTROL --> SAP GRC ACCESS CONTROL 5.3
SAP GRC ACCESS CONTROL 5.3
   Installation
   Language Version
   Adapters
click on installation --> download the zip file 51035605
uncar it using SAPCAR.
you will get your desired file.
Cheers !!!
Ashish

Trying to understand relationship between BSEG and BSID

Hi,
BSID is clearly the best table to look at when trying to get customer open items.
Would it be correct to assume that BSID has the same granularity as table BSEG though?
What I mean is, BSEG's primary key is basically Company Code, Document Number, Fiscal Year, Line Item. But BSID's contains a vast number of primary keys including clearing date, transaction type, and special G/L indicator.
Are these fields in the primary keys merely to make it easier to search for open items using these fields? Or, is it possible that for one record in BSEG there could be multiple corresponding records in BSID?
Thanks,
Tristan

BSEG is the table containing all FI documents whereas BSID is a table containing only Customer financial documents.
In a way BSEG is a superset for BSID.
Searching criteria is based on the data that is contained in a table. Hence the criterion varies between BSEG and BSID.
Hope this clears your query.
Cheers
P O I N T S!

ImageIO correlation between format and mimetype

ImageIO has method for getting readers by both mimetype & format, but writing only by format. Is there a defined mapping between ImageFormat and Mimetype. or if you read an image with :
ImageIO.read(new File(path));
or
ImageIO.read(new DataInputStream(new ByteArrayInputStream(imageData)));
how do you find out the format of the BufferedImage
thanks paul

It's not that strict. A BufferedImage doesn't remember its input's mimetype. The closest connection would
be that a BufferedImage has a ColorModel. For example, it could be an IndexColorModel with 256 opaque
colors -- GIF, you claim, but the imput could have come from a PNG or even a JPEG. (Or I could have created
it directly in memory). What you have to be mindful of is that not every ImageWriter and image format works
well with every type of ColorModel. For example, if your BufferedImage has an alpha channel (it is either
transluscent or a bit mask) you can successfully write it to a jpeg file, but most tools (apart from ImageIO!)
will be unable to read it. A couple of posters have mentioned that the ACME GifEncoder fails when
the ColorModel has more than 256 colors, but other GIF encoders are able to succeed. There may be other
concerns as well. TIFF format accepts multiple images in a single file, and again you can do this with
JPEG, but most other tools will only find one image in the file. If you think JPEG is being wimpy, ImageIO with
TIFF lets me compress multiple images with JPEG's compression algorithm, but the tool I'm using to
view the results can't handle that, sigh.
The bottom line is if you're interested in writing out one specific image, try it and see, and tweak it until it works.
If you're trying to implement code that works across a variety of input mime types, be ready for lots of
testing, to discover the special cases.

I don't have my apple id and i am stuck on os x mavericks window reinstallion what should i do please help

i bought macbook air from my friend and he dont have the apple id which he used when he bought it so my window crashed and i tried to reinstall the window but i dont have the apple id what should i doo please help

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

I don't understand correlation between ACL and dACL. If dACL is downloaded to the Catalyst switch what is the status of the ACL

Similar Messages

Maybe you are looking for