I experience issue with my Verizon iPhone5s cellular service not working on 3G.

I'm experiencing issue with my Verizon iPhone5s cellular service not working on 3G but LTE works great. I tried resetting network setting, new SIM card, reset iPhone to new too. I'm have the latest carrier code of 16.0. Iphone firmware 7.1.2.
I started experiencing this when verizon started advertising XLTE.
It is very frustrating when internet does not work when I'm in 3G area. Phone calls does work though. Signal is good too.
Thank you in advance.

I would agree w you but this only happens on Iphone5S.
Iphone5 works fine.  I tested this with other Iphone 5 and 5s.
To test this, go to setting/celluar/turn off "Enable LTE"

Similar Messages

  • IOS7 Update - Cellular Service Not Working

    After installing the long awaited IOS7 today, my cellular service does not work. Now I can only use

    I managed to get my ipad working after hours. The problem was that with the new ios7 came a carrier setting update 'Vodacom 15.1' which is the problem. Vodacom 15.0 is working.
    How to fix.
    Go to iTunes and make a backup of your device. Restore it from iTunes and restore your device from your backup. Do not accept any carrier setting update when prompted. After the carrier update your cellular will not work if you have the same problem.
    If you have an iPhone go to settings, general, about, carrier.
    Look at the carrier setting there and then look at your ipad. You will find that your ipad is probably a newer version currently.
    Note that this is not a ios7 issue, but a carrier setting issue.
    Hope it helps.
    Please let me know if you need more help.
    Ps. My ipad is still working great. What a relief. Almost took it in for repairs.

  • SHAREPOINT 2013 WITH SQL SERVER 2012 REPORTING SERVICES - NOT WORKING

    The SQL 2012 with SP1 is installed but the Reporting Services are not working and not able to connect the Sharepoint with it.
    i also TRIED TO install THE ADD-ON (rsSharePoint.msi) but it doesn't connect and show the Sharepoint Mode and cannot connect the Reporting services.
    If I install the Reporting Native feature then the reporting service config displays the Instance else doesn't show and connect to the sql server.
    But I am able to access the Configuration manager and TCP/IP are enabled.
    I have installed SQL 2012 and Sharepoint 2013. Please revert soon.
    Tks - Vinay

    Reporting Service
    http://msdn.microsoft.com/en-us/library/jj219068.aspx
    http://blogs.msdn.com/b/biblog/archive/2012/12/04/installing-and-configuring-sql-reporting-services-on-sharepoint-2013.aspx
    http://blogs.msdn.com/b/psssql/archive/2011/02/18/sharepoint-adventures-setting-up-reporting-services-with-sharepoint-integration.aspx
    http://dinesql.blogspot.in/2010/06/configuring-reporting-services-2008-r2_07.html
    http://www.codeproject.com/Articles/355461/Dynamically-Pointing-to-Shared-Data-Sources-on-SQL
    http://www.heysharepoint.com/problems-with-sql-2012-reporting-services/
    http://andrewcbancroft.com/2012/06/30/troubleshooting-sql-server-2012-reporting-services-and-sharepoint-2010-integration-part-1/
    Please find the helping URL
    Thanks
    Jaison A
    http://infomoss.blogspot.in

  • Urgent.  Issue with converted .mov files to avi not working in Premiere.

    I am trying to import video files that I have converted from .mov to .avi through OjoSoft Total Video Converter and anytime I try to put a file into the work area, the video goes to Video 1, and Audio goes to Audio 4.  When I try to play it I get no audio, and the video jumps from frame 1 to frame 2.
    Does anyone know a good converter or know the best way to convert and what filetypes to do so?  They work converting them as MP4 video files, but I like avi's better.
    I have tried converting the .mov to mpeg4 and H.264 (Both with audio as MP3).  They will play in Windows Media Player after convert but not in premiere...
    I am running Premiere CS4 on Windows7 with no direct codec packs installed.  I opened a video/audio file that I worked on before with no issues...video/audio run flawlessly in Premiere.
    Please help!

    What are the codecs in the original MOV files and what are the codecs after conversion? Use GSpot to identify them.

  • Issue with report Script. DECIMAL option not working properly

    Hi All,
    One of my report scripts has the option { decimal n } set. Now I am getting this to work only for account members which has a '%' symbol in the name. For all other accounts, data is being exported as a whole number even though the cube has decimal values. This is an ASO cube. Any thoughts?
    Thanks,
    N

    Here you go,
    //ESS_LOCALE English_UnitedStates.Latin1@Binary
    <sym
    {supall}{ROWREPEAT}{tabdelimit}{nameson}{noindentgen}{ SUPCOMMAS }{SUPMISSINGROWS}{ DECIMAL  9}
    <COLUMN (Period)
    July August September October November December January February March April May1 June
    <ROW(Year,Scenario,Version,Currency,Entity,Location,HSP_Rates,Stage,Business_Category,"BD_Responsible","Type_Of_Program","Client",Account)
    //{ OUTALTNAMES }
    &DCCurrFiscalYr
    &CurrScenario
    &CurrVersion
    "HSP_InputValue"
    "USD"
    <LINK(<LEV (Entity,0))
    <LINK(<LEV (Location,0))
    <LINK(<LEV (Stage,0))
    <LINK(<LEV (Business_Category,0))
    <LINK(<LEV (BD_Responsible,0))
    <LINK(<LEV (Type_Of_Program,0))
    <LINK(<LEV ("Client",0))
    "Net_Revenue"
    "552"
    "500"
    "501"
    "503"
    "Contribution"
    "Contribution %"
    "SD_Costs"
    "SD Margin"
    "SD Margin %"
    "Indirect Costs"
    "PBT"
    //"PBT %"
    "Total Tax"
    "PAT"
    //"PAT %"
    "Manpower Total"
    "Billable agents"
    "Total Seats"
    !

  • Anyone having an issue with the SD TV show option not working in iTunes Store?

    SD TV shows are not available to purchase, I can only get the HD shows.  Is anyone else having this problem?

    I'm having the same problem and am quite frustrated.  I have quite a few season passes for different TV shows, but they are all for the SD versions (cheaper, smaller, and quicker to download). I can get to the TV show's download page, but only the HD version shows up.  I can see the button for the SD version but when I click on it nothing really happens, or the only thing that happens is that the "HD" symbol after the name of the TV show at the top of the page disappears. But even though the "HD" symbol next to the TV name is gone, the episodes are all still only available to download as HD versions. The problem isn’t just that it’s only the HD versions that are available but I already paid for the SD season passes. And I'm not going to pay more money to download the HD version, I don't want, just because the iTunes store has a glitch.
    So I really hope that Apple fixes this soon.

  • Day 3 on Mavericks and still having serious issues with the finder it simply is not working correctly. we have over 1000 files all stored using a number. When searching nothing comes up at all.

    3 Days using Maveriks and still cant find any files using our number system.
    I have tried searching using key words and job numbers but nothing is found or works !!
    Its a big problem
    Steve.

    Hi haha fresh tees,
    Thanks for visiting Apple Support Communities.
    If you're searching in Finder or Spotlight and don't get the results you expect, try reindexing your hard drive using these steps:
    Spotlight: How to re-index folders or volumes
    http://support.apple.com/kb/ht2409
    From the Apple () menu, choose System Preferences.
    Click Spotlight.
    Click the Privacy tab.
    Drag a folder or an entire volume (your hard drive) to the list.
    If prompted for confirmation, click OK.
    Remove the item or volume you just added to the list by clicking it and then clicking the minus ("-") button.
    Close Spotlight preferences.
    Spotlight will re-index the contents of the folder or volume.
    Cheers,
    Jeremy

  • Scrolling suddenly stopped working on laptop. this is'nt the first time as I have had issues with my laptop mouse scolling feature not working

    What a pain in the ass. Firefox will inadvertently stop the scrolling feature from working on my synaptics laptop mouse. It works for every other program except Firefox. Really??? This has happened on other versions of FF and I was sooo reluctant to upgrade as I was afraid it would happen again and viola, 3 days later it stopped working. If I restart FF scrolling works for about 15 seconds and then stops again. This is a joke.

    Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
    Here is how to do this:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Disks icon at the top of the AirPort Utility window
    Click the Disks tab below the icons
    Click Erase
    The "Quick Erase" option will only take a moment or two
    Now you can backup your MacBook Pro. If you connect an Ethernet cable from the MBP to one of the LAN <-> ports on the TC, the first backup will go 3-5 times faster than wireless.
    Once you have the first backup done, you can use wireless for subsequent backups since they will only take a few minutes

  • My ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working. i have a a windows PC please help thanks

    my ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working.
    ive tried everything and ive been to the store which was when i was given a new ipad mini. i have a a windows PC please help thanks

    Are you attempting to sync music from your iTunes Music Library on your PC?
    What options do you have set on the Music Tab for your iPad in iTunes?
    What happens when you sync?
    Any error messages?

  • HT201210 The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when conn

    The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when connected.
    I have wasted my precious 2 days and nights and am lost all my hope...APPEAL TO ALL GEEKS TO RESOLVE MY ISSUE ON HUMANITARIAN GROUNDS ATLEAST WITH SOME VALID TIME OF YOURS.
    All mails can be sent to [email protected]
    Restore of Ipod back up is present...but is not getting restored due to some iTunes issue with playing my music files.It says restoring and extracts but failes in 1 min with the said error.

    Other users and reported error 1 but I have not seen a solution.
    Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.

    I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

                      Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

    Take each of the following steps that you haven't already tried.
    1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
    2. From the menu bar, select
     ▹ System Preferences ▹ Sound ▹ Output
    Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
    3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
    5. Reset the NVRAM.
    6. Reset the SMC.
    7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
    8. Make a "Genius" appointment at an Apple Store.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
    *An SSD doesn't need to be zeroed.

  • Anyone had or having issues with getting nVidia NVS 450 resolution to work?

    Hi all,
    We got a new C20 with a nvidia NVS 450 card--and a ThinkVision monitor. The C20 had Windows 7 preinstalled; the out-of-the-box resolution was 640x480 and we couldn't get it to go higher than that! The ThinkVision and the video card are connected using the DisplayPort cable that came with the unit. After reinstalling the video card driver that came with the unit (on a CD that contains drivers for Windows and Linux), we could never get the resolution to go beyond 640x480. We gave up thinking it must be some quirk with Windows 7. We were going to install Linux on the C20 anyway, so we moved on doing that.
    We installed Fedora 14 (64-bit) installed the nvidia video driver that was on the CD and can't get the display resolution greater than 640x480. After a few days of trial-n-error referencing various online forums, we managed to get the resolution up to 800x600, but not the expected 1900-something resolution the ThinkVision and the video card supports.
    Has anyone had issues with getting the video card resolution to work? If so, were you able to resolve the problem? We thought we'd toss this here instead of calling up Lenovo support first because usually with technical issues, we get more intelligent replies than over-the-phone. Also, waiting for replies on a forum is less frustrating than being put on hold over the phone.
    Chris
    Solved!
    Go to Solution.

    Thank you for your reply.
    I was lucky to get a hold of another monitor and when I connected that, I got the full resolution. After much testing, I determined that it was a faulty monitor and it had nothing to do with the video card. I eventually got a replacement monitor for the one that wasn't giving me the full resolution.
    Afterwards, I went ahead and got the latest nvidia drivers from their Web site. Everything works really well now.

  • FD32 - Customer credit, Issue with mass update of "TITLE OF NOTE" field

    Hi All,
    we have requirement for mass upload of credit master records. I am facing an issue with creation/populating of Title of note field. When we go directly to FD32 transaction we have a button "Services for Object" near tiltle of second screen of FD32 through which we can create a title of note (SOOD-OBJDES) but when we go to FD32 through SHDB for BDC recording, that option is not found.
    Any idea on how to handle mass update for that field?
    Dhareppa

    Hi,
      You can use function module 'SGOS_NOTE_CREATE'. to create a note after you create customer credit limit through SHDB for BDC recording. It is going to be a separate program.
      Function Module Parameters:
      IS_OBJECT-OBJKEY = customer no + credit control  area. --> ex. 20000000140001
      IS_OBJECT-OBJTYPE = BUS1010
      IP_TITLE = Your title
      IT_CONTENT = your note content.
    Cheers,
    Chaiphon

  • After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

    After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

    Additional testing i perform to make wifi work but nothing works out:
    i did re-installing the software using iTunes, reset the network settings restarting the phone. Nothing solves my problem.
    wifi was working with older software versions. i think there should be a problem with 8.1.1.
    is anyone has fix for this issue?

Maybe you are looking for