I filed the report on a response I recieved that wanted it.

My orginal post did have the problem.  The report was filed in response to that post and the question I posted about.  Having problems with facetime and  a messaage problem with c_l kernel plugin.  I did not know I would have to repost the problem every time I gave information that was asked for by a member of the board.  On other boards I belong to it all goes to the original thread under my user name. 

You do not have to start new threads. All you need to do is to reply to any such requests for additional information in your original thread. The Reply command is below every post in the thread. You can see all your posts by clicking "My Stuff" at the upper-right. Here are the links directly to your previous threads:
https://discussions.apple.com/message/22715581#22715581
https://discussions.apple.com/message/22716078#22716078
Since you now have two different threads on the issue, I'd suggest choosing one and either copying the information from the other and posting it as a reply to your original post, or pasting in a link to the other thread.
You might find the tutorials in using the Communities helpful:
https://discussions.apple.com/static/apple/tutorial/index.html
Regards.
Message was edited by: varjak paw

Similar Messages

  • Report sometimes empty - responsibility

    Hi,
    After updating a computer, a User could not run any reports. After cleaning the cache the User can now run reports. However, one report is empty.
    When I run the report using the same responsibility and the same parameter, I get data. When the User runs it, the report is empty.
    Any suggestions?
    Thanks.
    Leah
    Edited by: user476771 on Feb 17, 2013 1:33 AM
    Just to clarify, the user can run the report successfully on another computer.

    NO PROBLEM now. It turns out that the problem was with the User's version of the report. She only told me that now.
    Leah

  • Add another choice beside the (Report as Abuse)

    Hi Everyone,
     I would like to see another button with a kinder name such as (Check Post) or something added to the options in the image below that can be used for alerting moderators of things like Off Topic posts, posts with the wrong code language,
    or things like that, that are not really offensive and leave the (Report As Abuse)  button for things that are offensive such as Spamming, Being Rude to people, Using Foul Language, Adult Content, Posting malicious code and things of
    that nature. In my world they are two totally different categories and they should not be lumped into one.
     Suppose while i am viewing both the VB and C# forums at the same time and i accidentally post a VB code in the C# forum as a response to someone accidentally. I would be rather offended if i see that someone has marked it as Abusive when i didn`t mean
    no harm. Think about new comers to the forums. They may be offended as well and move to a different forum if they see that there question or reply to someone is marked as abusive.
     Thanks.   8)
    If you say it can`t be done then i`ll try it

    "If someone is posting to the wrong forum, it's considered an abusive post?"
     The (Mark As Abuse) button is basically used to alert a Moderator to look at the post and see why it is marked as abusive and they can decide if it is actually reasonable. They then have an option to remove the Abusive tag and let it go, remove the
    post, alert the poster that they have made a mistake, or whatever. I just think that in some cases as i have said above, the person may have made an honest mistake or have responded to someones question that takes it off topic a little. I don`t think that
    should be considered as Abuse like Spamming, leaving sarcastic rude comments to others, or using foul language.
     As i have said, if a new comer has made one of these mistakes then they may see it marked as Abusive and get offended causing them to decide to leave the forum. I don`t like to see that happen because, it would seem that the forum would want to keep
    people here and not offend anyone.
    "Are there any other hidden reasons for a post being marked abusive?"
     There is a whole list that seems to have grown over the years that are used as reasons why it may be marked as abusive and some of the reasons should not be considered as Abuse in my opinion. I am not sure where they are listed. I have seen some posted
    in some threads and can`t seem to locate the list at the moment.
    "That thread I linked is a good example of the attitude.  Here is another"
     I have seen some of this type of stuff and i don`t agree with anyone posting anything that is meant to be rude to othersno mater who they
    are. I am only asking for a button that will let the poster see that they may have made a small mistake instead of thinking they are being Abusive which may offend the poster if that was not there intent.
     My main point of this thread for example being, there is a difference between someone accidentally posting something in the wrong forum and someone posting a bunch of foul and/or offending words in a post on purpose that are meant to be sarcastic.
    If you say it can`t be done then i`ll try it
    This is a good suggestion. I think it was grouped together since they perform the same function... flag the mods to take action. Can you send this request to fissues at Microsoft?
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • OBIEE 10g - Unable to see data in the report view with grand total applied

    Hi,
    We're facing with a strange issue.
    We're working on a report view.
    We're able to see data when Grand total is not applied on the report. The moment Grand Total is applied, it's showing either an empty table with NULL values or "No Results" page.
    Please help.
    Thanks in advance.
    -Rama

    Hi Dpk,
    Thanks for your reply.
    I included it in the instanceconfig.xml, but the issue still exists.
    Couple of Observations
    #1 - We noticed this issue when we drill down to the level which has really sparse data.
    It works fine when we look at the enterprise wide report.
    #2 - Works fine with few dimensional attributes and facts on the report
    When we add a fact that doesn't have any value at that level, the issue starts to appear.
    Thanks in advance.
    -Rama

  • Issue in using presentation variable as filter condition in the reports

    Hi,
    I have an issue in using presentation variable as filter condition in my reports the details are as follows:
    Details :
    We want to implement the Max and Min variables through Presentation variables only.we do not want to implement it through session variables in this case.
    We have two variables MIN and MAX to be used as Presentation Variables,for a column of the report (which is a quantity),so that the user wants to see the data for this column within a particular range.i.e the Min and the Max.This part has been implemented well . The issue is when the user wants to see the full data.In that case we will not pass any values to these two Presentation Variable or in other words we are not restricting the report data so we are not passing any value to the variables,this is when the report is throwing the error. we want to leave this variables blank in that case.but this is giving error.
    Please suggest how can I overcome this issue.
    Thanks in Advance.
    Regards,
    Praveen

    i think you have to use guided navigation for this. create two reports first is the one you are having currently and second is the one in which remove the presentation variable from the column formula. i.e. the same report with no aggregation applied.
    Now create a dummy report and make it return value only when the presentation variable value is not equal to max or min. guide the report to navigate between the first and second report based on the result of the dummy report.

  • How do I use page numbering and a text block in a footer in Word with the Report Generation Toolkit?

    I am creating a Word document with the Report Generation Toolkit, and LabVIEW 8.2.1. In the report I am using a template that has page numbering enabled in the center. When I try to add a text block to the left side footer, it eliminates the page numbering and adds my text on the left side. I found "Set Report Footer Text" and "Word Set Page Numbering" vi's that may be the clue to this. When I use these two vi's I either get Page 1 of 456789-001 on the left side, or if I reverse the order I get only 456789-001(text) in the left side with nothing in the center. What I would like to achieve is 456789-001(text) on the left footer, and Page 1 of 2 in the center. Is this possible and if it is, then how can I do it?

    Hi SciManStev,
    I have attached a vi where you can see how they can be made to work together. You have to design it such that one follows the other. If you don't design it that way, it results in a race condition and only one of them get executed.
    Good Luck!
    Warm regards,
    Karunya R
    National Instruments
    Applications Engineer
    Attachments:
    SciMan1.vi ‏14 KB

  • The Report is Empty.

    Hi,
    Im using Crystal Reports 2008 on VS.NET 2005 and .NET 2.0
    I set the dataset to the report programatically.
    The report viewer is empty.
    But the report has more than 2 pages.
    When I click next page on the Crystal Report Toolbar, the report data appears. But not when it is loaded.
    This has worked fine before. The code has not been changed but something did change and screwed up the report.
    Please help me here.
    Aswin Dwarakanath.

    I'd recommend the following:
    Export the report to Crystal Reports format. See if the fields (in the CR designer) are stripped out from the exported report. If they are , you have a dataset issue where you are not matching the schema the report is expecting. To check that, do the following:
    1) Write out your dataset to XML:
    myDataset.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
    so, in your case you want to write out the xml after
    cr.Subreports.Item("Transaction Breakdown").SetDataSource(clientTotals) and
    cr.Subreports.Item("Last10Weeks").SetDataSource(transactionTotals)
    E.g.;
    cr.Subreports.Item("Transaction Breakdown").SetDataSource(clientTotals)
    clientTotals.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
    cr.Subreports.Item("Last10Weeks").SetDataSource(transactionTotals)
    transactionTotals.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
    Now, I do not see where or how you are setting the datasource to the main report, so if you are also using dataset, do the same for it.
    2) Open your report in the CR designer.
    3) Go to the Database menu and select "Set datasource location"
    4) Choose "Create new connection"
    5) Choose ADO .NET (XML)
    6) Point to your xml
    7) Click on he <Update> button.
    If you get a field mapping dialog, the schema of your dataset is different from what the report is expecting and you need to adjust that.
    Ludek

  • Unable to link the report from an application

    Hi,
    I have java application.  There is link in one of Pages of application.
    When user clicks on the link, it opens up WebIReport ( there is only 1 report, XI 3.1 ).   I don't want user to enter his username and passwd again ( we get prompt for username and passwd when we try to login to infoview ). 
    Can anyone send me the code for that ?
    I tried with my code, but its not working.
    Diablog

    From what I understand, you have a custom application that is viewing a webi document that links to a webi document using an opendocument URL.  You will either have to have SSO setup for opendocument or pass a token in the URL that can be used to authenticate. 
    Since the link is part of the Webi report, you probably can't modify that URL at runtime to include a token.  Your best option is to make the URL in the report point to a custom page that can create a token and a opendocument URL based on the rest of the parameters that you are passing in the URL.

  • SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

    Hi,
    I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
    PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
    "processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
    report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
    Default' to data type int."
    My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
    Troubleshooting performed:
    1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
    reporting started throwing errors again.
    2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
    3. re-registered the SQL management Provider WMI class.
    mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

    Hi All,
    Finally found exact solution to the reporting error.
    Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
    It may already have been terminated. (rsRuntimeErrorInExpression)"
    Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
    primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
    Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
    Reporting Services Point in SCCM Primary Site, and then click apply.
    Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

  • How to insert a new field in the Report Designer

    Hi all.
    I have a query and a report, but the query evolve.
    We have a new key figure (inside rows).
    In the report designer, I check the data provider.
    The new key figure is added in the catalog field.
    Now, I would like to insert the new field in the report.
    I add a new row in the report structure but it isnt what I want.
    In this case, I add a second row inside an another keys figures block.
    I want to create a new block for my new key figure
    Thanks for your help
    Céline

    Yes, key figures is in the field catalog.
    But When I do that " Insert a row ", Report designer create a " row 2 " below another key figures.
    And it isn't what I want. I want a new block .
    For exemple in the tab report structure (My new key figure is "Margin")
    I do that
    Group Level 1 : key figures
             Detail Area
                      Sales Amount
                                   row1
                                          cell1
                                          cell2
                      Cost
                                   row1
                                          cell1
                                          cell2
                                   row2 ( the new row added)
                                          cell1
                                          cell2                     
    But I want that:
    Group Level 1 : key figures
             Detail Area
                      Sales Amount
                                   row1
                                          cell1
                                          cell2
                      Cost
                                   row1
                                          cell1
                                          cell2
                     Margin
                                   row1
                                          cell1
                                          cell2                     
    Thanks for your help

  • SCCM 2012 R2 Cu1: Can I reinstall the Reporting Services Point role without delete or change the SSRS-DB?

    Hi, I have some issue with the reports,
    Can I reinstall the SCCM Reporting Services Point role without delete or change the SSRS-DB (just reset the SCCM SSRS function)?
    I have saved/backup the custom made reports.
    /SaiTech

    Yes you can remove and reinstall the Role.  I had to do this recently on our SCCM 2012 R2 due to an issue with the reports not loading.   Found out that the problem with reports was from the upgrade to R2 from 2012 SP1 and was able to run
    a command to re-register the reports with WMI.  I actually removed the role, uninstalled reporting services feature from SQL, deleted the report databases, reinstalled the SQL feature, configured the reporting databases again, added the role back, and
    ran the following command.
    mofcomp "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
    This allowed all my reports to register as they should have and run without errors.  If you are having similar problems, you may be able to just run that command to get reports running without all the extra work I did.  For us we were getting an
    invalid Class error in the srsrp.log.
    Brian

  • When Starting OC4J, why the report server doesn't start automatically? !!

    Dear All,
    I have DS 10g on my system and I start the OC4J when I have to run either forms or reports.
    But when I attend to start the do the following command from the form:
    WEB.SHOWDOCUMENT(..../getjobid<jobid>?server=<servername>...), I have an error: FRM-41213: Unable to connect to the report server <servername>.
    I noticed that if I run the following URL:http://<server>:.../reports/rwservlet, it gives me a list of command, but the server still not running..But if I add any command to the above URL like for example "getserverinfo" or "showjobs" then the server is started. Now, and after the command, if we return back and we run the report from the form, the report will run successfully.
    The question WHY??
    Regards,
    Joe
    Message was edited by: Joe
    Joe Farah

    Hello,
    That's the way it works ...
    http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_strt.htm
    2.1.3.1 Starting the In-process Server (Windows and UNIX)
    If you are using Reports Server as an in-process server (the default configuration), sending a run report request starts the in-process server; however, if you are sending a request through a command line, the servlet must be invoked first using either the run report URL or the Web command URL. When you have successfully started the servlet, this also means you have successfully started the in-process server.
    If you use "Oracle Application Server", the "in-process" reports server will be started automatically by opmn ...
    Regards

  • How to run the report via application server

    Report not running?
    hi All,
    I am calling the report via forms, In application server i had recompiled the reports in two different format too.
    1. myreports.rep
    2. myreports.jsp
    I have called the report from the menu and i used code like below
    Declare
          V_id Varchar2(100);
    Begin
        V_id := Run_Report_Object('myreports');
    End;but i am getting following error.
    Frm-41219:Cannot find report:Invalid ID.and subsequently an another too.
    Frm-40738:Argument 1 to builtin RUN_REPORT_OBJECT cannot be null.please guide me
    kanish

    I using Forms 10g R2, i store the recompile version in Application server.
    Good, so you can refer to the metalink note I mentioned above, as per storing the reports in the application server, the default place for running reports is not a folder in the FORMS_PATH, the REPORTS_PATH is set in the $ORACLE_HOME/bin/reports.sh file, pointing by default to the sample folder - $ORACLE_HOME/reports/samples/demo, for testing purposes you can put your report there and try it again, or you can modify the REPORTS_PATH variable in the reports.sh file to point to the directory you were mentioning.
    Note: I am calling the report throug menu using the eariler posting code.
    I would recommend to create a Form to call the Report, I am not sure if there are restrictions about invoking a report directly from the menu.
    About the code, you are missing a lot there, refer to metalink note mentioned above, here is an excerpt from that document.
    PROCEDURE TEST_REPORT IS
      repid      REPORT_OBJECT; 
      v_rep      VARCHAR2(100); 
      rep_status VARCHAR2(50); 
    BEGIN 
      repid := find_report_object('report5');
      SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH); 
      SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
      SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
      SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
      SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
      SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
      v_rep := RUN_REPORT_OBJECT(repid); 
      rep_status := REPORT_OBJECT_STATUS(v_rep); 
      WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
        LOOP
          rep_status := report_object_status(v_rep);
        END LOOP;
      IF rep_status = 'FINISHED' THEN
        /*Display report in the browser*/
        WEB.SHOW_DOCUMENT('http://<YourServerName:8888/reports/rwservlet/getjobid'||
       substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
      ELSE 
        message('Error when running report'); 
      END IF; 
    END;
    In my eariler version 6i (2 tier) when i call the report it invoke parameter form. will 10g also behave same like 6i?
    Yes, there is still a parameter Form which runs in an HTML page.
    *1. Should i want to create any Report_Path, Report_classpath ? if yes ,where should i ?* It will depend on your configuration, the easiest way is to setup the REPORTS_PATH in the $ORACLE_HOME/bin/reports.sh file, if you are configuring the reports server to use environment ids, that would not work and you would need to setup the REPORTS_PATH directly in the reports engine configuration file .. $ORACLE_HOME/reports/conf/rwserver.template.
    Edited by: Rodolfo Ferrari on Jun 3, 2009 3:19 PM

  • How to close the report background engine programatically in developer 6.0?

    Friends,
    We have developed our application using Oracle Developer 6.0 as front end and Oracle 9iR2 as a back end.
    whenever the user is opening the application one session is creating after that if he runs any report the report background engine is started and that engine also creating one session. So, unnecessarily two sessions are opening for a single application.
    So, how can we close the report background engine programatically after the report displays all the records?
    Moreover, when the user close the application, the report background engine is still open. the user has to close the report background engine manually.
    so how can we solve this issue?
    Thanks
    Sathyguy

    i got this while searching but its not working.....
    Problem Description
    Starting reports using a RUN_PRODUCT on Windows platforms starts a
    Reports Background Engine (RBE). After leaving the forms application the
    background engine is still running and must be terminated by the user.
    Solution Description
    This is intendet behaviour.
    To close the Background Engine programmatically use the Reports Runtime parameter
    ORACLE_SHUTDOWN. E.g.
    Perform the following actions to stop the RBE when closing the Forms
    application:
    1) Create a dummy report which only does e.g. a SELECT * FROM DUAL
    This report has a DESTYPE=FILE and a DESNAME to e.g. C:\TEMP\DUMMY.OUT
    2) In the POST-FORMS trigger add the following code:
    DECLARE
    pl_id ParamList;
    BEGIN
    pl_id := Create_Parameter_List('dummy');
    Add_Parameter(pl_id,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'Yes');
    Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
    Run_product(REPORTS,'<<name dummy rapport>>',SYNCHRONOUS, RUNTIME,
    FILESYSTEM,pl_id,NULL);
    END;
    Explanation
    The Report Background Engine runs separately from the Forms application and
    there is no direct relation between these processes. The Forms should signal
    the RBE that is being closed.
    When the Form is closed the POST-FORM triggers sends a dummy report to
    the RBE. Since the ORACLE_SHUTDOWN=Yes parameter is used after running the
    report the RBE is terminated.
    A small side-effect of the solution is that a small file (5Kb) is created on
    the file-system contaning the output of the dummy report.

  • Quantity Total Stock is incorrect in the report

    0TOTALSTCK (Quantity Total Stock) is a non-cumulative key figure in the standard cube 0IC_C03 (Material Movements). The user is running a report for September month (01.09.2008 to 30.09.2008). At the end of the month i.e., 30.09.2008 the total stock is 0 in R/3, But in the BW reoprt it is showing as -19,000 which is incorrect.
    How can I check how the that value is calculated in the report? I can't see that key figure in the Infocube content preselection screen. In the definition of key figure,  it is calculated throgh Inflow and Outflow and mentioned arregation as Summation and Exception aggregation as Last Value. Is it correct? It should be linked with 0CALDAY for checking the stock day by day. How does it know?
    Any setting has to be done in the Report in order to get the correct values for the total stock qty?
    Please reply asap.

    Shiva,
    Inventory is calculated as a non cumulated KF which is aggregated based on stock receipts and stock outflows based on an opening stock marker. Think of this as something like a bank passbook where only debits and credits are entered and accordingly the balance is calculated. The Brought Forward line on your passbook is similar to the marker where once a page is completed the last available balance is updated.....
    only things which are not to be done in MM are :
    1. Compression without marker update - this corrupts the MM stock values.
    Also make sure you update the marker properly. The only solution to your case would be to do a full recon between the cube / R/3 and accordingly re-init / update the marker etc.
    Arun

Maybe you are looking for