I get a "Palm desktop by access application has stopped working" message when switching to the Month calendar view.
I have a Z22 and am running Access version 6.2.2 on a PC with Vista.
When I move from Day, Week or Year to Monthly view in the Calendar, I get the "Palm Desktop by Access Application has stopped working" (and then the Windows message saying they are checking for a solution, which they never seem to find).
Does any one know 1) how to fix this and 2) what is the cause ? Am I running old software which I need to update ?
Thanks.
Post relates to: Palm Z22
Thank you, aeisha_anis for the steps to correct this problem. I verified that I must have corrupted calendar data as the PALM Desktop does come up and work when I follow your first 4 steps and remove the data from it. I can't, however, get through the importing step at the end of your instructions. I've tried a few times and am afraid I may have messed up the data file as it now is only showing a datebook. mdb and a datebook.bak file under the DateBook folder I copied to my desktop, but no datebook.dab folder as it was showing before and I never did find the datebook.dat file you mentioned. I still have all of my current calendar data on my Palm Centro but I can't get it to sync with the Palm Desktop without getting the "Palm Desktop by ACCESS Application has stopped working" message. Do you have any ideas on how to fix this problem? Thanks much!
Similar Messages
-
I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
Solved!
Go to Solution.Hi - are you getting it at the start of installation, during or after 100% progress has finished?
Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
This could be caused by the NVIDIA chipset driver :
https://decibel.ni.com/content/message/46299?tstart=-130
Thanks
Sacha
// it takes almost no time to rate an answer -
After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.
One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time. -
When opening Itunes, after placing my ID and password, I'm getting a message that indicates "Itunes has stopped working. A problem caused the program to stop working. Windows will close the program and will notify you if a solution is available. But I never get a response. Can somebody help?
Same exact thing with me. And no help from apple. Just dropped nearly $600 and cannot get a decent working setup.
Apple's only suggestion was to uninstall iTunes and Quicktime, and re-install... of course (the I.T. Crowd tactic).
The crash happens only on iTunes store access. -
I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
I have iPad 2, iPhone 5s, both with iOS 7.1.2. I use PC with Windows 7 and hard wire internet service and iTunes to update apple products; no wi-fi. I updated iTunes to v11.4 on 09/11/14. I ran Windows update on 09/10/14. I did not try to open iTunes on my PC until yesterday 09/16/14. I got the message: "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I got the same message today. Does anyone know if this is a Windows problem and if a solution is coming or an iTunes problem? I can get iTunes on iPad and iPhone. All other programs PC are working correctly. I use Norton Internet Service on PC. I ran virus scans and repair/reinstall iTunes yesterday on PC.
Hello notime4,
The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen -
When I launch PH in CC, I get a window that pops up saying, PS has stopped working, this it shuts down. Is there a fix.
These questions below may be for a different product... but the KIND of information you need to supply is the same, for the products you use
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840 -
Keep Getting Adobe RoboHelp 9 has stopped working Message
I am running on Windows 7 Professional, SP1, 4GB RAM, 64-bit OS, with Administrative privileges using Adobe RoboHelp version 9.0.1.232. I am creating projects on my C drive and linking them to Word 2010 docx files that are on the network then generating them as AIR files for testing purposes at this point. Each linked document is a technical manual (with a TOC and index) having anywhere between 100 and 1000 pages. The plan is to create a project for each of the 20 manuals then link them together and generate a Master Project as an AIR file to distribute to our customers. The manuals contain flowcharts, bullets, numbered lists, images, tables, hyperlinks, etc with approximately 100 custom styles defined in one Normal.dotm file. Only defined styles are used in each of the manuals and all manuals use the same Normal.dotm file. Each custom style is linked to a corresponding style in a custom RoboHelp css file used by all RH projects.
I have a default project that is used to create each separate project which includes a linked docx file that contains each of the custom styles so I do not have to link each Word style to the corresponding RH style every time I create a project for a different manual. My process is this: create project, link docx file, change Properties to create new TOC, Index, Glossary, Generate the linked document, Update linked document (when applicable), generate the AIR file, then update the Word document (in Word) as necessary. I then Update the linked document in RH and generate the AIR file again....and keep doing that until it looks good. So far, I have successfully created projects for 11 manuals with projects ranging in size from 20 to 50 MB. So I know the problem is not my styles, etc.
My problem is this....I will sometimes get the message 'Adobe RoboHelp 9 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available'. Sometimes, I will get the message when the manual has been updated in Word and I select Update in RoboHelp while other times it occurs when I am first getting the project set up. Right now, I am getting this message when I select Generate for the linked manual. I checked my application log file and see that I am getting an EventID 1000, Task Category 100 error. The manual is 477 pages/7.6 MB and the RoboHelp project is 42 MB and has only two really small flowcharts. I have successfully created a project for this manual a couple times before after updating the Word document for things I saw in the AIR file, but when I selected Update in RH, I would get the message and the project was then corrupt so I had to start over. I know it is not an installation problem because I can then open another project and it works fine.
Things I have tried without success: copied the linked manual to my C drive to remove the network aspect. Closed all other applications so only the Word document and RoboHelp are open. My experience has been that in most cases, RoboHelp is happier when I have the manual I am working with open in Word but have also tried it without Word running. I have tried creating the project on the root of C instead of in my folder. Tried it when no one else was on the network (5 am). In one case, I pulled out a chapter that was about 50 pages of flowcharts - which fixed that one. All our flowcharts are inserted into borderless tables as metafiles so they are not free-floating.
Any help anyone could give me as to why this is happening or what I can do differently so as to prevent this from happening would be greatly appreciated.
Thank you!
KathiMy inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi -
I get the "firefox has stopped working" message after closing browser
Hello.
My problem is that when I close the FireFox browser I get the "FireFox has stopped working" message. It's pretty annoying. I've read some other posts here that described a similar problem and have tried some of the suggestions in them including:
A clean install, a browser reset, running in safe mode, unchecking hardware acceleration, disabling extentions and plugins one at a time, uninstalling my antivirus (avast), rolling back to version 23.01 and checking run in compatibility mode that someone claimed helped them. None of this was effective.
It seems like after a computer restart the browser will be ok for 2-4 closings and then it will start with the message on every closing. Also, after I uninstalled avast it was good for 6 closings. Rolling back also gave me about 6 message free closings. But then the messages start and doesn't stop.
Is there anything else I can try? Thanks in advance for any suggestions.One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time. -
I keep getting this message when I try to open my new Adobe Photoshop. The main screen comes on and a box for the tutorials then this. "Adobe Photoshop CC 2014 has stopped working. A problem caused the program to stop working correctly." When I say Okay to the message, it shuts down the program.
Refer below link once
Photoshop: Basic Troubleshooting steps to fix most issues -
Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium -
After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??
My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi -
Getting itunes has stopped working message after downloading to Windows 8.1
Getting ITunes has stopped working message after 10 seconds after downloading to Windows 8.1
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2 -
I get a message that itunes has stopped working. When I check out why it is because of the dep security on my computer. When I try to find the program for itunes for the .exe file i cannot find it to turn off the dep for that file
I found the file but when I added it to the list for the Data Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?
-
Trying to play amovie just downloaded. Keep getting "Itunes has stopped working" message.
Trying to play a movie just downloaded. Keep getting "I tunes has stopped working" message. Any suggestions for fixing this?
Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows
Maybe you are looking for
-
I only got my iPad 3 2 months ago , it use to charge fine until a week and a half ago , now it dosnt charge atall when my iPad is on you have to turn it off while the charger is in it and it only charges if you leave for a whole day , how do I fix it
-
Is there any problem while changing WEBLOGIC server to OC4J
Hi, We have developing a product in Jedeveloper 11g. In the development mode, we are using WEBLOGIC 10.3 as the application server. But during production mode, we have to apply the EAR files in oc4J APPLICATION SERVER. While changing this, whether my
-
Need Help Installing Elements on Mac
I purchased Adope Photoshop Elements, downloaded the files but they won't install? Can someone please explain the steps to me, I'm new to Mac. Thanks so much
-
Webdynpro iview in HTML iframe
Hello, I'm trying to put a portal webdynpro iview in a html iframe, and when I do it the screen just repeatedly refreshes and never loads, but when I try the normal webdypro dispatcher address on the iframe it works just fine. The problem with it is
-
Sample Portal Syncronization problems
Hi everybody, I have this problems with syncronizing my portal application. I am following all the steps as it is given in weblogic portal documentation but I am getting a bunch of errors which I have placed in the end. can anybody help me with this