I got a SeqEdit.exe Problem Message when Inserted expression, is it a bug?

I was trying to insert an expression in the Expression Browser to evaluate limits, but every time I selected "Insert" it displied a SeqEdit.exe problem message and quited TS.
The problem was always with the same specific expression. There are attached 3 files to show the problem. Is it a bug or am I doing something wrong?
I'll appreciate your help.
H.P.
Mfg. Test Engineer
Certified LabVIEW Associate Developer
Solved!
Go to Solution.
Attachments:
ExpressionBrowser.JPG ‏51 KB
NITestStand4.1.JPG ‏26 KB
SeqEdit.exeErrorMsg.JPG ‏27 KB

Hecuba,
This was reported to R&D (# 141372) for further investigation by our developers. After preliminary investigation, it appears as if the CheckLimits() expression language function is not properly checking how many parameters you have passed to it.  If you pass the correct number of parameters, it should work correctly.
Thank you for the feedback, and for helping us make TestStand a better product!
Message Edited by Josh W. on 01-20-2009 10:02 AM
Josh W.
Certified TestStand Architect
Formerly blue

Similar Messages

  • Setup.exe error message when installing PC companion

    Anyone ever got this message when trying to install Sony Ericsson's PC companion? I'm trying to install on Windows 7 Ultimate 64 bit system. System protected by BitDefender Total Security 2012.

    forget about PCC
    try
    http://dl-www.sonyericsson.com/cws/download/1/110/61/1309763183/Update_Service_Setup-2.11.7.13.exe
    don't forget to mark the Correct & Helpful Answers

  • Error message when inserting table into JSP

    I am using JDEV 10.1.3.3 and am getting the following error message when I try to create a table in a form on a jsp:
    "Could not complete get pdusage from application because it would result in an invalid document".
    Here is the stack trace:
    oracle.bali.xml.model.XmlReadOnlyException: read-only on commit
         at oracle.bali.xml.model.XmlModel.__precommitTransaction(XmlModel.java:2676)
         at oracle.bali.xml.model.XmlContext.__precommitTransaction(XmlContext.java:1519)
         at oracle.bali.xml.model.XmlContext.__commitTransaction(XmlContext.java:1549)
         at oracle.bali.xml.model.XmlModel.__requestCommitTransaction(XmlModel.java:2717)
         at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:575)
         at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:555)
         at oracle.bali.xml.model.task.StandardTransactionTask.__commitWrapperTransaction(StandardTransactionTask.java:413)
         at oracle.bali.xml.model.task.StandardTransactionTask.runThrowingXCE(StandardTransactionTask.java:203)
         at oracle.bali.xml.model.task.StandardTransactionTask.run(StandardTransactionTask.java:98)
         at oracle.adfdt.jdev.transaction.JDevTransactionManager.fetchUnderTransaction(JDevTransactionManager.java:110)
         at oracle.adfdt.view.common.binding.provider.ADFBaseProvider.<init>(ADFBaseProvider.java:34)
         at oracle.adfdtinternal.view.faces.binding.provider.ADFIteratorModelProvider.<init>(ADFIteratorModelProvider.java:46)
         at oracle.adfdtinternal.view.faces.binding.provider.ADFCustomTableModelProviderFactory.createModelProvider(ADFCustomTableModelProviderFactory.java:64)
         at oracle.adfdtinternal.view.common.binding.datatransfer.ADFBindingsProviderInfo.getData(ADFBindingsProviderInfo.java:40)
         at oracle.adfdtinternal.view.common.binding.datatransfer.BaseADFDataInfo.getData(BaseADFDataInfo.java:35)
         at oracle.adfdt.view.common.binding.utils.ADFBindingUtils.getTransferData(ADFBindingUtils.java:1087)
         at oracle.adfdt.view.common.binding.utils.ADFBindingUtils.getTransferModelProvider(ADFBindingUtils.java:1111)
         at oracle.adfdtinternal.view.common.binding.datatransfer.ADFDocumentFragmentCreatorInfo.createDocumentFragment(ADFDocumentFragmentCreatorInfo.java:63)
         at oracle.adfdtinternal.view.common.binding.operation.CreateOperation.apply(CreateOperation.java:96)
         at oracle.bali.xml.model.datatransfer.operation.PerformOperationAction.actionPerformed(PerformOperationAction.java:39)
         at oracle.bali.xml.share.ActionProxy.actionPerformed(ActionProxy.java:47)
         at oracle.bali.xml.gui.swing.dnd.DropMenuInvoker$CleanupProxy.actionPerformed(DropMenuInvoker.java:235)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
         at java.awt.Component.processMouseEvent(Component.java:5488)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
         at java.awt.Component.processEvent(Component.java:5253)
         at java.awt.Container.processEvent(Container.java:1966)
         at java.awt.Component.dispatchEventImpl(Component.java:3955)
         at java.awt.Container.dispatchEventImpl(Container.java:2024)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
         at java.awt.Container.dispatchEventImpl(Container.java:2010)
         at java.awt.Window.dispatchEventImpl(Window.java:1774)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

    Hi,
    obviously you try to drag and drop a component to a place where it breaks the document. Make sure the table is added to the JSP body. Have a look at the page sources for existing syntax problems - e.g. missing close elemenents or misplaced elements
    Frank

  • Error message when inserting built in flash buttons

    Anyone help point me to a solution?
    Previously worked fine - but now a problem. When wanting to
    either add or edit existing flash buttons, all I get is "Error
    unknown" - no ref ID to help me.
    In the html editor window - I can no longer see the flash
    buttons. They have been replaced with the greyed flash icons. The
    flash functionality has just disappeared for some reason?
    I run mac os x - and have the current MX 2004 upgraded
    version 7.01
    I've reloaded MX 2004 - but no good.
    Any ideas anyone please?
    BTW - I'm not an expert by any means - but just baffled and
    frustrated!

    Alan
    Thanks for the pointer I will scan all of the code in the
    morning for non-standard characters.
    I do not see any with firs scan but I did change the path to
    all of the files whan I moved the data to a new disc.
    I went through DW and reset the paths in the site menus and
    had it recreate the file map and the cache.
    I did not get any errors for that process but that does not
    involve the Java interpeter;-)
    I will post the results later EITHER positive or negative.
    quote:
    Originally posted by:
    Newsgroup User
    > I am running DW8 on an imac (intel CPU)
    as a guess from years of this- there is a "funky" character
    in the hd name,
    your username, or a folder name in the path to this local
    site folder. Dw
    trips up on the character and can't resolved the path to the
    local site
    folder.
    so it doesn't create Flash Text or Flash Buttons and gives an
    Undefined
    Error.
    And will give constant nags that "the selected homepage is
    not in the local
    site folder"
    please do this.
    open a new dw document using File->new
    -->don't save this file<--
    type some text, select it, and using the property inspector's
    Browse to File
    folder icon make a link to this site's "homepage"
    view the code, copy the link code and paste into reply.
    See this technote:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14452
    it should be an absolute full hard drive path like this:
    href="file=///hdname/Users/username/folder/folder/file.html"
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Error message when inserting .FLV file

    I have Captivate 6 and have downloaded all updates that appeared when I went to the Help menu > Updates.
    I am going to Video > Insert Video and browse for my .FLV file (this is a Multi-Slide Synchronized Video). I then select "Modify slide duration to accomodate video" and click OK. I am prompted with the following error:  "Video encountered an internal error"
    The .FLV file was downloaded from a Virtual Classroom recording in Adobe Connect and is 49,329 KB.
    Can anyone help me with this?

    Hi Vikram -
    Thank you for your reply.
    I have  version 6.0.1.240
    I receive the same error when I try to insert the video as an Event Video
    The error happens in all projects. I have tried several blank projects, and a few existing to test it out.
    Below is a screenshot of the options I select when inserting a video, along with a screenshot of the error message I receive after clicking OK.

  • "Internal Problem" message when attempting to log into BO 6.5

    EDIT The message windows states "Internal Problem" not "Internal Error"
    I'm getting this simple message box when trying to launch BO 6.5 and/or Supervisor 6.5. There is no other information provided and nothing entered into the event viewer. It's happening from all workstations with BO installed so I presume the issue is on the server and not with the individual workstations.
    Any ideas as to where to look?
    Thanks,
    Mark
    Edited by: Mark Landry on Feb 13, 2009 6:27 PM

    Hi Mark,
    Following solutions might help you to resolve the issue.
    Solution1:
    Add the problematic user to the administrator user group.
    Solution2:
    -search and back up old *.key and *.lsi
    - run supervisor.exe directly on server
    - if able to see login page do a save recovery of the bomain.key
    - scan repair repository if able to log in
    Solution3:
    Alternatively copy a bomain.key created from a different computer
    Copy a "*.rss" file and save it under the database folder.
    The RSS file can be located by going to C:\Program Files\Business Objects\Data Access\
    Under the Data Access folder, locate the folder which corresponds to the database you are connecting to. Within that folder you should see an .rss file.
    If you still cannot see the file, close Zabo and then re-launch it and open the report. This should recreate the *.rss file that is needed to run the report.
    I hope this will help you.
    Regards,
    Sarbhjeet Kaur

  • Problem messages when Firefox downloads update

    Over the last couple of weeks I get the following sequence of events every few dats:
    # A message from Norton Internet Security that updater. exe is safe
    # A message that an unknown publisher updater. exe. is attempting to access my computer. I click on allow the program
    # A message from Firefox that I should apply the updates as soon as possible. I click on more information
    * A software update window that shows "connecting to update server" But it never connects, even if I leave the window open for hours.
    # Firefox opens but there is no message saying updates were successfully installed.
    If I go to About Firefox:
    * It checks for and downloads updates . The Apply button appears
    # I click on apply and the same sequence of events as above occur
    According to About Firefox I currently have Firefox 4,0, Yahoo edition 1.8. I have Windows Vista.

    If Firefox gave you the following error message:
    Firefox could not install the file at
    https://addons.mozilla.org/******.xpi
    because: <br /> Invalid file hash (possible download corruption)
    -261
    This error message may be caused when Firefox is set disallow third party cookies.
    To accept the third party cookies:
    go to Tools -> Options -> Privacy -> tick 'Accept third party cookies'.

  • "You are about to download an .EXE file" message when downloading

    is there any way to disable this stupid message? Who cares if I am downloading an EXE file for Windows. I don't remember this message in older versions of Safari and I hate it in this one.

    Hi
    Safari 3rd party SAFT has many features, including "stop download warnings". Once installed, most features are accessed via Safari's Preference file.
    You might also try deselecting "open safe files etc." via Safari Preferences>General, however, not sure if that will stop the warnings.

  • I keep getting a SETUP.EXE error message when downloading firefox 3.6.10

    Each time I have attempted to open firefox 3.6.10 after downloading is completed I receive an error message that states "Setup has caused an error in SETUP.EXE, setup will close now. Try restarting your computer and try again". I have done this for each of my last three sessions, what can I do.

    Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME. <br />
    http://www.mozilla.com/en-US/firefox/system-requirements-v3.html <br />
    You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz.
    http://sourceforge.net/projects/kernelex/

  • I got the following installation error message when trying to download and install a Lightroom trial:

    Exit Code: 7
    Please see specific errors below for troubleshooting. For example,  ERROR:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 3 error(s)
    ----------- Payload: Adobe Photoshop Lightroom 5 5.7.1.0 Adobe_Lightroom_x64.msi_5.7.1 -----------
    ERROR: Error 1935.An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070BC9.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1935.An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070BC9.
    ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

    Errors "Exit Code: 6," "Exit Code: 7"
    Error 1935 | Assembly component
    Mylenium

  • Error Message when Inserting Page

    Adobe Acrobat 5.0
    For several years, I have been printing my financial statements/payments from online financial sites as an Acrobat document, then saving each month's file to an annual file using the Insert Page function.
    This has worked well until recently when I have begun to receive the error message: "These documents contain subset fonts that have the same name and cannot be merged."
    I have searched the net for some resolution to this problem but have seen nothing very helpful.
    Is there a way to remove the subset fonts from the document or, failing that, some other way to resolve this problem?
    Any help will be greatly appreciated.
    Jim Crockett

    If you select the text and right click on properties, you should be able to remove the subset and save the entire font. It might be acceptable to not keep the fonts since you are the only one using the PDFs. At least you might try such variations.

  • HT4145 Unexpected error message when adding express to existing network

    Following all steps correctly to extend wifi at home, I connected the Airport express to the base router via Ethernet cable. I get a green light, no wifi signal and "unexpected error ".  message.

    This annoying and unhelpful message is very common when attempting to change an AirPort Base Station's configuration. The best solution is to "hard reset" the Express and configure it anew.
    Make sure the Ethernet cable is intact and connected at both ends, power up the Express, then press and hold its reset button and keep it depressed long enough - eight to ten seconds - for its LED to flash amber rapidly. Then, release the button, select the Express in your Mac's Wi-Fi icon, and configure it using AirPort Utility.
    On occasion, AirPort Utility will not find or recognize the Express after it has been reset. If it does not appear, click the Other AirPort Base Stations button at the upper right and see if it appears there.
    This assumes you are using AirPort Utility 6.x.
    If you are still having problems reply with the version of AirPort Utility you are using and at which point you are getting stuck, and I will find some applicable screenshots.

  • ORA-01654 error message when inserting multiple records

    Hello all,
    I have a Test table with attributes TEST_ID, TEST_NAME, TEST_DATE, STATUS, and want to insert multiple records into this table based on user input form. If user select a value from the drop down list, and the number of records to insert into the Test table, the application should insert that many into the Test table with the same TEST_DATE, STATUS, but TEST_NAME should be the drop down list value + i (1....the number of inserted records). I manually created the form, and wrote a sql for the process.
    For example if the user select MUSIC, 3 then data should look like this
    TEST_ID TEST_NAME TEST_DATE STATUS
    1 MUSIC1 04/06/2010 Y
    2 MUSIC2 04/06/2010 Y
    3 MUSIC3 04/06/2010 Y
    I got the error ORA-01654: unable to extend index TEST_TOOL_ID.TEST_PK by 128 in table space FLOW_13120862905990037739.
    The process query
    DECLARE IDTEST NUMBER := 1;
    BEGIN
    WHILE (IDTEST < :P1_COUNT + 1) LOOP
    INSERT INTO TEST ( TEST_NAME, TEST_DATE, STATUS )
    VALUES ((:P1_TEST_NAME || ' ' ||IDTEST), SYSDATE, 'Y');
    END LOOP;
    END;
    Here is the link to this application
    http://apex.oracle.com/pls/apex/f?p=4000:1:3173416575551580::NO:RP:FB_FLOW_ID,F4000_P1_FLOW:32828,32828
    Any help would be appreciated.
    Thanks,
    Karoline

    This is the output i get when i change the getMessage with printStackTrace.
    String getMessage() replaced with printStackTrace:
    G:\studies\Chapter11\MakeDB.java:33: 'void' type not allowed here
                   System.out.println("Could not drop primary key on UserStocks table: "
    ^
    G:\studies\Chapter11\MakeDB.java:43: 'void' type not allowed here
                   System.out.println("Could not drop UserStocks table: "
    ^
    G:\studies\Chapter11\MakeDB.java:54: 'void' type not allowed here
                   System.out.println("Could not drop Users table: "
    ^
    G:\studies\Chapter11\MakeDB.java:64: 'void' type not allowed here
                   System.out.println("Could not drop Stocks table: "
    ^
    G:\studies\Chapter11\MakeDB.java:83: 'void' type not allowed here
                   System.out.println("Exception creating Stocks table: "
    ^
    G:\studies\Chapter11\MakeDB.java:102: 'void' type not allowed here
                   System.out.println("Exception creating Users table: "
    ^
    G:\studies\Chapter11\MakeDB.java:119: 'void' type not allowed here
                   System.out.println("Exception creating UserStocks table: "
    ^
    G:\studies\Chapter11\MakeDB.java:133: 'void' type not allowed here
                   System.out.println("Exception creating UserStocks index: "
    ^
    G:\studies\Chapter11\MakeDB.java:159: 'void' type not allowed here
                   System.out.println("Exception inserting user: "
    ^
    9 errors
    Tool completed with exit code 1

  • Error message when inserting Spry

    When I insert a Spry Widget, anything Spry doesn't matter
    which one, I keep getting a javascript error. It says it's in line
    455 of Dreamweaver CS3. Has anyone had any experience with this?
    Don't even have a chance to change styles or appearances. I had
    upgraded to the new Spry Widgets downloaded from Adobe.
    Thanks,
    Lydialysol

    line 455 of which page? What is the complete error?
    Nancy Gill
    Adobe Community Expert
    Author: Dreamweaver 8 e-book for the DMX Zone
    Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
    2003)
    Technical Editor: Dreamweaver CS3: The Missing Manual,
    DMX 2004: The Complete Reference, DMX 2004: A Beginner's
    Guide
    Mastering Macromedia Contribute
    Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
    Web Development
    "cheryljames" <[email protected]> wrote in
    message
    news:fgqfvh$pp1$[email protected]..
    > When I insert a Spry Widget, anything Spry doesn't
    matter which one, I
    > keep
    > getting a javascript error. It says it's in line 455 of
    Dreamweaver CS3.
    > Has
    > anyone had any experience with this? Don't even have a
    chance to change
    > styles
    > or appearances. I had upgraded to the new Spry Widgets
    downloaded from
    > Adobe.
    >
    > Thanks,
    > Lydialysol
    >

  • Error message when inserting keyfeilds in Multiprovider?

    Hi,
    Iam using multiprovider, when i try to insert some keyfeilds in multiprovider the mentioned error message is happening
    -> CL_RSD_MULTIPROV_CHECK========CP and form CHECK-03
    ->  OLAP processor found an error,
    Intially there is no errors occured when i try to work in bex for relevant multiprovider these error message occuring.
    How to overcome this?
    Thanks in advacne
    vas

    Hi,
    What is SP level or check this note(1252207) it might helpful
    Regards,
    SAtya

Maybe you are looking for