I got my ip4 febuary 25th 2013. That means I get an upgrade next month! What are the actually chances I will get a 6 because I don't want anything else.
IIf I have a upgrade coming up which phones are available to upgrade to? I have iPhone 4.
The chances are totally dependent on what you decide to purchase.
You can purchase any phone you would like. Of course, the amount you are willing/able to spend may affect the decision on which phone you purchase.
There would be nothing preventing you from purchasing an iPhone 6, though, except for you.
Similar Messages
-
hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india
Only the carrier to whom the device is locked can authorize it's unlocking. Contact the carrier to see if they offer unlocking and if you qualify.
-
15 minutes ago I purchased the perfect browser. I'm not experienced with computers and it's more that if can handle at this time. What are the steps I need to do.
It's a browser from App Store. " the perfect browser ". I couldn't find any information for refunds . I'm just learning about ios7 and it's well above my level.at this time
-
What are the actual characters that must be looked at for an Apple TV 3 replacement?
As title, 3rd and 4th character or 4th and 5th character?
http://9to5mac.com/2013/04/15/apple-says-small-number-of-apple-tvs-have-wifi-iss ues-opens-replacement-program/
http://www.macrumors.com/2013/04/15/apple-initiates-replacement-program-for-3rd- generation-apple-tvs-with-wifi-connectivity-issues/Answered my own question on the power supply, now I will answer the questions on the battery, and the lower right hand corner having those ghost shadows, and what they actually are. To answer the battery question, I simply went, and custom made one using the current top of the line AMD 3550MX APU, and it comes with the standard 6 cell battery so that question is answered. On to the next.
The ghosty white shadows some owners see on this model, and on others in the Pavilion line, are simply the HP logo light shining through the screen. Some like the light, some don't. I happen to like it, but as others have asked, I wish there was a way to turn it off, and on. Ok, 3 of my questions answered by own ingenuity, lol, I think I'll start a thread specific to this model as many owners are out there as this model too, has been sold out by Best Buy, and seems to be a lone child in that there is very little, correct, info on this model. We need to band together, and answer all the questions that remain on the dv6-6b47dx model. -
I've updated my phone and I've made a backup. but now it says I must enter my code to restore all my files and I haven't got this code. If I cancel the process or choose something else, all my stuff will be deleted, and I really don't want that.
HELP ME PLEASE!!!If, for some reason, your backup got encrypted and you don't know the code, you'll have to set up your phone as new device and start all over again without the backup.
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
If you can't get pass the lock screen, connect in recovery mode and restore the phone, you'll have the option to reset the lock secreen passcode.
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software. -
My friend just got back her stolen ipad...she says that she purchased all of her music and apps through the apple store. Will she be able to get back any of the content she has paid for?
If for some reason she has failed to maintain a backup copy, not good, then she can redownload some purchases in some countries:
Downloading past purchases from the iTunes ... - Support - Apple -
Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
What are the possible errors that can happen in data loads(rsmo monitor)?
hi all,
what could be the error that could result in red color in the RSMO monitor of data load transaction?
1. request everything ok
(what are the possible error type which make here red)
2. extraction everything ok
(what are the possible error type which make here red)
3. transfer (idocs and trfc) error occured?
(what are the possible error type which make here red)
4. processing
- data package
5. process chain
(what are the possible error type which make here red)
6 other messages.
(what are the possible error type which make here red)
thanks
poojaHi,
I can tell you the most common reasons of these failures.
1. request everything ok
Here it will be telling you if the request was properly send to source system and got triggered there.
2. extraction everything ok
In this step the actual extraction of data happens, issue slike sysfail or CPIC error may cause this to fail.
3. transfer (idocs and trfc) error occured?
When extraction is complete and data is being send to BW. But if dur to some reason it fails, error may come here.
4. processing
Processing in BW fails for each data packet is displayed here.
This can also happen when you have sysfail in source.
5. process chain
This can show the logs of the chain here and also status of subsequent process.
6 other messages.
Any other error message.
Refer
What is the information we can get the through details tab in RSMO
working with RSMO errors
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also
Data Load Errors
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Data Load issues
Errors in loading
data loading errors
load Errors
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Hope this helps.
Thanks,
JituK -
What are the 'events' that are captured by a Visual Studio Workflow (PWA)
Hello All,
I need to understand what are the different events that Visual Studio workflow (PWA 2013) knows when it an event is triggered. As far as I know there are 3 events
'OnProjectSubmit', 'OnProjectCommit' and “OnProjectCheckIn'.
Are there any other events that workflow understands, especially on a click of a Save button?well done...
http://www.soran.edu.iq -
Hi All,
We are migrating from on-premise SharPoint 2010 to SharePoint online 2013.
I have few questions below:
What are the possibilities and limitations of using Out of the box content search webpart?
Also, how the cross site publishing will work in SharePoint online something with managed navigations and product catalog apporach? if it is not supported, then what are the alternatives to acheive the same?
Appriciate any commnets/clarifications.Thanks in advance.
Thanks,
Dhananjay.Here are the possibilities of Content search webparts
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/configure-a-content-search-web-part-in-sharepoint-HA104119042.aspx
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/when-to-use-the-content-query-web-part-or-the-content-search-web-part-in-sharepoint-HA104206662.aspx
Compare the strengths and limitations of the Web Parts
It’s important that you understand the strengths and limitations of the two Web Parts because if you choose the wrong one, your site could run into performance problems. You can use both Web Parts to show content that is based on a query. In a simplified
world, here’s how you can decide between the two:
Use the CQWP when you have a limited amount of content, your query is simple, and you don’t expect your content to grow much in the future.
Use the CSWP in all other scenarios when you want to show content that is based on a query.
The table below gives a comparison of the two Web Parts:
Web Part behavior
Content Query Web Part
Content Search Web Part
Query configuration
Easy
You’ll need to know about certain search features such as
managed properties.
Query across large amounts of content
Limited
Yes
Handle complex queries
Limited
Yes
Scale to handle future content growth
Limited
Yes
Display content from other site collections
No
Yes (see
section below)
Design of query results can be customized
Yes, by using XSLT.
Yes, by using HTML.
Maintenance cost in a complex site architecture
High
Small (see
section below)
Narrow down the query results that are displayed in the Web Part
No
Yes, in combination with the
Refinement Web Part.
It was not there previously but then it was added to Office 365
http://blogs.office.com/2013/10/29/search-innovations-for-site-and-portal-design-in-sharepoint-online/
If this helped you resolve your issue, please mark it Answered -
What are the tasks for infopath developer or designer can do in 2013 as well as 2010
Hi
Can you please any one let me know what are the real time work for Infopathe designer or developer in 2013 or 2010?
Is there good feature for InfoPath Designer or developer?
Thanks and Regards
S KHi,
FYI: They just announced there is no more InfoPath after SP2013:
http://blogs.office.com/2014/01/31/update-on-infopath-and-sharepoint-forms/
That doesn't mean all InfoPath will be stopped immediately but I would think about JavaScript/Html5 instead. Looks like they are moving that way now.
Regards,
Vladimir
MCP, MCTS, SharePoint tips blog: http://buyevich.blogspot.com -
my ipad mini has been stolen and i have activated the find my iphone to lock. now it is only a wifi device so what are the chances that a person can get hold of it and log onto wifi without the password of my device to unlock. does that not make the app rather less useful as i have to hope that the person is apt enough to log onto the internet but not enough to erase it and start afresh. is it possible to find my device even afte someone has erased it?
"Losing your iPhone feels lousy. Thankfully, iCloud can help you get it back. But if it looks like that’s not going to happen, new Find My iPhone features in iOS 7 make it harder for anyone who’s not you to use or sell your device. Now turning off Find My iPhone or erasing your device requires your Apple ID and password. Find My iPhone can also continue to display a custom message, even after your device is erased. And your Apple ID and password are required before anyone can reactivate it."
http://www.apple.com/icloud/features/#fmip -
I got a text message which had a link attached to it, i did click on the link, basically some job scam but on the link. Now i just want to find out if my phone has been compromised in anyway and what are the tell tell signs.
your phone has not been compromised. There have been no viruses, worms or trojan horses ever reported.
-
Dear Experts,
I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. What are the parameters that I need to set in CRM system so that my quotation gets replicated without any error?
Please help me in this regard. An early and in detail step by step guidance is highly appreciated.
Thanks,
SMTPIt may be best to recreate the folder and the smart playlists from scratch.
tt2 -
What are the models of nokia that has 3d graphic a...
What are the models of nokia that has 3d graphic acceleration??
yep petrib u are 100% correct. i dont see why they did not add 3D Acc. in N96.
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions!
Maybe you are looking for
-
Error logging on only for iWeb
I have changed no settings and have tried connecting on many different networks, but for the past 2 days every time I try to publish my changes to my iWeb site, the following happens: - says "logging onto .Mac" - creates pages - says "There Was na Er
-
Gurus wats the difference here---- MATERIAL REQUISITION, ORDER PLAN and PURCHASE REQUISITION? thanks rash
-
Hello all,I am having some issues with APP-V 5. I am having particular issues with starting a packaged SIMS.net. I keep recieving: "Application Failed to Launch. This may be due to a network failure 0x0FD01B25-0000007B" ...within a second or two of c
-
FM10: any way to set view as element boundaries (as tags) to always show tags?
I'm using FM10 in TCS3 on Windows XP. We upgraded from FM8 and in that version, eventually, the element tags were displayed whenever you opened a topic. (It took about 1,000 times for it to learn, but eventually it did.) I've looked in preferences a
-
AIRIntrospector not working in Eclipse/Flex plugin
hi all- I am trying to debug my javascript. I have an AIR application and am running it inside Eclipse with the Flex plugin. My application main file is mapit.mxml. It uses a mx:html widget to grab map.html. Inside map.html is the javascript I want t