I have a 2013 Buick Enclave with Pandora icon on the screen. I was told that to connect my iphone 5 with USB port and that worked. But as soon as I disconnected, Pandora went out on screen. Only works plugged in now. Should work without USB connected.

I have a 2013 Buick Enclave with Pandora and Stitcher on the nav screen. With my Samsung S3, Pandora automatically lit up and worked. with new iphone5, I was told I need to connect USB port to car and phone and start Pandora. That worked and the icon on screen lit up. but as soon as I removed the USB cord, Pandora and Stitcher greyed out and stopped working. I know it's supposed to work on the car's nav screen once I hardwire it (at least that's what I was told), but as soon as I disconnect, they stop working through the car. How can I install Pandora and Stitcher on my car WITHOUT having the usb cord attached? the idea is to be able to use the car's touch screen to control Pandora, but with the phone plugged into the USB port, I can only use the phone to control Pandora, which of course is dangerous when driving! And it worked correctly with the samsung, so I have to believe it can work with the iphone 5! Right? Thanks.

You cannot install the apps on the car.
The cars head unit is merely acting as an interface to the apps on the device.
If you want to use those apps in the car, plug the device in and leave it plugged in.

Similar Messages

I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated.

I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated. Heres an image of before and after. The first image I use is a JPG 72dpi 1500px x1500px and I want to downsize it to 600x600px same res, but it keeps pixelating, this has never happened before. Any suggestions, thoughts?
thanks!

I wouldn't say pixelated; more like blurry.
Like ConnectedCreative said, what steps are you using? Are you using "bicubic sharper" when resizing down?

Hi, I am working with CS6 Design Standard for Mac, I bought from Adobe a DVD with the Software. I installed it already on my mac book. Soon I wanna buy a second computer for my work. When I bought the software I was told that it is possible to install the

Hi, I am working with CS6 Design Standard for Mac, I bought from Adobe a DVD with the Software. I installed it already on my mac book. Soon I wanna buy a second computer for my work. When I bought the software I was told that it is possible to install the software on a second computer. But I also read lately that I will only be allowed to work with one computer. I want to work on both of my computers without de/installing and de/activating the software every time. Is this possible? Thank you!!

You should be able to install the products on two computers as long as they are not running at same. Also the platform should be MAC.
You may download the product from
Download CS6 products

Iphone 4 has a black screen which will display the apple logo for approx 10 seconds, then goes blank for 10 seconds and so on. I have tried a hard reset with power button and home button but no change. Get no response when attempting to connect to itune

iphone 4 has a black scrren which will display the apple logo and appears to be at start up but then blacks out for approx 10 seconds and then displays apple logo again. Same action over and over.
I have attempted hard reset but cannot complete. Also attempted to connect with itunes and it does not recongize device.
Device is frozen in this display loop. Have an appointment with genius bar tomorrow but it's a 2.5 hour round trip so suggestion appreciated.

Your device may need to be restored as new in iTunes (instead of restored from a back up as it seems that there is a software issue on your phone).
If your phone is not able to connect in iTunes try forcing recovery mode (http://support.apple.com/kb/HT1808)
* power off your phone.
* Hold the home button while connecting your phone to iTunes. You should see the connect to iTunes window and your computer should give you the recover mode alert.
*Restore your device as new. Being sure not to restore from a previous back up.
You will then want to sync your information back to your device from Outlook, iCloud, Google or wherever your information is stored.

I downloaded Firefox 4, have a Mac Powerbook G4 with OS X and firefox downloads, but opens with an X on the symbol and won't work, says architecture won't support - what is up?

Have tried 4 times to download Firefox 4 and each time it seems to be working OK, but when I go to move the firefox symbol onto the Application symbol, the firefox symbol has an X in an O indicating that it won't work and doesn't. Note says that the architecture won't support the new download. Can I get the update and if so, how? Dave Morrison

Firefox 4 doesn't run on a PowerPC Mac.
Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

I have purchased an iphone4 from Canada n sent to India . I was told that it is unlocked but wn opened in India it appears locked ... Asking for security key ... What to do ?

What is the security key asked while in iphone4 ?

No idea what you're talking about. What EXACTLY is the message you're seeing and where are you seeing it?

HT201269 one fine day, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working . May i know how to proceed to recover lost conta

one fine day yesterday, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working . May i know how to proceed to recover lost contacts.

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

HT201210 once again my iphone not working. i have a usb sign pointing to an itune icon on the screen. this is been on for over 24 hours. tried to restore but keeps coming up with era can anyone help please

once again my iphone not working. i have a usb sign pointing to an itune icon on the screen. this is been on for over 24 hours. tried to restore but keeps coming up with era can anyone help please

What is the error that is occurring? We are not mind readers.

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7. Surely there is software that will allow older scanners to work on OS10.7. My MacBook Pro runs 10.6 and the

Although the HP Scanjet shows up in the system profile for the computer it is generic and is not configured (as in screen shot). It also does not show up in the ;ist of pritnters, scanner when I open Image Capture. I can't load the software that came with the printer because it is out of date so that would make it impossible to configure the scanner on the new iMac. see below: Too bad there isn't some generic profile I could load that would cover the 5550c. I have a new all in one printer-fax-scanner but the old one can scann in slides and negatives which I have.

Hi, I bought an iPad and was so impressed by Safari that I replaced Chrome with it on my Windows XP Toshiba laptop and now when I use Safari the icons on the screen continue to flicker until I come out of Safari. Is there a cure other than using a Mac

Hi, I bought an iPad and was so impressed by Safari that I replaced Chrome with it on my Windows XP Toshiba laptop and now when I use Safari the icons on the screen continue to flicker until I come out of Safari. Is there a cure other than using a Mac

When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

HT1349 As soon as i open itunes it comes up with the message 'itunes has stopped working'. i have uninstalled everything to do with apple/itunes and reinstalled it 5 times and it keeps happening :( . What can i do?

As soon as i open itunes it comes up with the message 'itunes has stopped working'. i have uninstalled everything to do with apple/itunes and reinstalled it 5 times and it keeps happening . What can i do? Please HELP

Hi,
i have tried all that and it still comes up with the same message or doesnt open at all . I have also i have created a new user and itunes works fine on that account.

Iphone seems to be working but only shows apple logo, itunes sees the phone normally, when i restored it appeared successful and itunes tried activating my phone but the screen only shows apple logo nothing else???

my iphone is detected in itunes as normal, but screen on the phone only shows apple logo??? restored and everything but no difference its weird, it restores successfully and stuff but once done the screen only shows apple logo.. note:while restoring everything goes through as normal on the phone it shows the bar loading etc.. but once complete just stays on apple logo.

It can take a few minutes to reinitialize, but if it stays on the Apple logo for as much as 10 minutes there is something seriously wrong. Try restoring again, and set up as a new phone rather than installing your backup. If this fixes it you have a corrupt backup. If this doesn't fix it the phone is broken. Or possibly jailbroken.

I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

Please give us more specific information -
What make/model camcorder are you using?
Are you absolutely certain this is AVCHD video? Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
Why are you attempting Log & Transfer from a card reader instead of from your camcorder? Have you tried doing Log & Transfer from your camcorder?
Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
Are you using FCE 4.0 or FCE 4.0.1?

I have mi new ipad screen broken in one corner, I was really disappointed because it was drop from about 30 cm so I was not expecting the screen to be broken, well I went to apple store in regents street in London and I was told that I have to pay 250 po

I have mi new ipad screen broken in one corner, I was really disappointed because it was drop from about 30 cm so I was not expecting the screen to be broken, well I went to apple store in regents street in London and I was told that I have to pay 250 pounds for the screen replacement, it was a rip off and after many years using apple products I have expend thousands of pounds on them, I just think is a rip off price. It will be difficult but I won't be buying any apple products anymore, I really feel like I was abuse that was half of the price of a new iPad. I have never complain in my life but this time I think apple is abusing me as a costumer.
I'm really upset, I'm furious that apple uses his dominance in the market to Rip off costumers like me.

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
You can get the glass replaced at 3rd party repair sources for less $, however, the Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
Don't know if there are any 3rd party repair places in the UK.
 Cheers, Tom

When I try to fill out forms on line my I cannot send as it says my email isn't valid. I ve tried with my gmail and my work email and no luck. It will recognise my partners email with no problem. Please advise

When I try to fill out forms on line my I cannot send as it says my email isn't valid. I ve tried with my gmail and my work email and no luck. It will recognise my partners email with no problem. Please advise

Assuming that you can send email on the iPad, Maybe something is corrupt in Safari that is causing this. Try clearing Safari and see if the sites will accept your email address.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

I have a 2013 Buick Enclave with Pandora icon on the screen. I was told that to connect my iphone 5 with USB port and that worked. But as soon as I disconnected, Pandora went out on screen. Only works plugged in now. Should work without USB connected.

Similar Messages

Maybe you are looking for