I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference. Is there a plug in I need?
I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference.
I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow. I try bridge mode but the internet doesn't work.
You building supplied internet is a cheap service that is without proper routable addresses..
Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
You can put a password on the wireless.. go to the airport utility and put in a password.
Other than that I don't understand what password you expect.
Can I get an explanation of what bridge mode is?
No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
Double NAT, and set your own wireless names. There is no alternative.. sorry.
Similar Messages
-
After updating my I phone to io7 my phones battery power instantly halfed I have switched off all back ups etc etc and reset my entire phone but no difference any iseas
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then was new). Try each of these in order until the issue is resolved.
-
My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! The sound is ok if I play CDs & respond to remote control fine... The hifi & docking station are Sony
1) When I go to the apple.com website my computer will either be really slow or freeze my whole system down to where I have to reboot my computer again. This does not happen all the time but when it does operate it is molasses slow.
By any chance, are you uswing Kaspersky security software?
If so, see:
[With Kaspersky Internet Security 2011 installed on my computer the website apple.com is imaged incorrectly. What should I do?|http://www.kaspersky.com/support/kis2011/all?page=14&qid=208282422] -
I have a £50 gift voucher and I tried to buy something with it, but it tells me there was a billing problem with a previous purchase and makes me put in my debit card details. My debit card has no money atm, can't I just pay with my voucher for the things that have a billing problem? I tried to put my voucher code in again but it won't let me do that.
If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account. -
Imac keeps restarting on its own after installing update X?
Imac keeps restarting on its own after installing update X?
What do you mean "update X"? What update are you referring to?
-
I got a new apple iD so when i try to update my apps it wont change the last one that i had so i cant update my apps. How do i fix this?
- Go to Settings>Store and sign out and sign into your account.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account. -
i have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??
Hi
Did You ever use - iPhoto ?
Did You may be direct iPhoto to a different Photo Library
As iMovie tries to find the appropriate photo library - it can get lost if iPhoto direct it into a Library on a not connected external hard disk or to a strange location - And iMovie HANGS.
Do - When no other program is running that might interfere
• Start iPhoto - BUT NOW KEEP alt-key (option key) DOWN during the full Start-Up process
• Now iPhoto let's You select Photo Library
• Select the one in Your Account / Home folder / Pictures ! !
• Then iPhoto should start up OK
• Now Quit iPhoto
• START iMovie
Does it still hangs - then I would suspect - iMovie Pref. file
If it Run's OK - Then HURRAY !
Yours Bengt W -
I cannot get the Output Module to work. I was able to get the button to show up, but when I click on it, nothing happens. i need to export a PDF asap. I am trying to export 33 PSD files in BRIDGE to a PDF like I used to do on my other computer with bridge.
Let's start with the general things.
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help? -
iPhone 4S with the latest updates 8.1.3 (12B466) installed.
When I switch back to an ongoing application, from the switcher, it reverts to its own 'homepage' rather than the stay at the state/stage I left it at.
How can I force applications to maintain the current state?
I am in the process of getting enough screenshots to demonstrate further.ios7 keeps refreshing apps after switching
solcwd -
the Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.
I'm looking for a possibility to use the iPad for photography while traveling, without the access to a computer.
Shooting photo's in RAW format crates pretty big files that will fill up the iPad's memory pretty fast if you shoot a lot during a (let's say) month long trip.
my idea was to use load the photo's to the iPad so i could view them and sort out any bad ones. then copy them over to the storage device so i can continue using my CF cards for shooting. I have an image thank for copying the photo's directly to the HDD but it would be so sweet to be able to check them on the iPad before hand.
any suggestions?Check out pogo plug device, it allows you to upload camera roll via wifi.
-
I downloaded IOS 6 and using the apps movies , books and I-store I get connected to the USA store and not to the Dutch one like before. So i cannot update my purchaged apps. How can I change this ?
Have you looked on all the pages of your iPod? Have you looked in all your folders? Have you you tried finding the apps using the iPod's search page.
PS: Offering points in advance is a violation of there terms of service for this forum. Perhaps it's why you have not received any other answers so far, -
I have forgotten my password for icloud, have an invalid email address and do not know my security answers. How can I transfer all my data from my old iphone to the new one?
In this case you won't be able to do that?
-
When I turn iPad on I get a box that says Not Enough Storage and neither the Closeor Settings buttons do anything. The iPad turns off on its own. It is full charged.
Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up -
What to do if the apps were closing on its own?
What to do if the appa were closing on its own?
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
I've paid $ 3,99 for Xcode for Snow Leopard 12 days ago. After installing Lion I saw there is a new FREE Xcode for it, so I downloaded the new one but after installing automatically Xcode for Lion the Developer folder contained the old one. I deleted the old Xcode but the App Store says "Installed" and don't allow me re-download Xcode.
How can I proceed? I'm guessing whether this problem will occur each time I buy an application from App Store.Yes, that's righ, Xcode installer was in the Apps folder. I assumed it had been automatically installed and the installer deleted after installation (the same way as Lion is installed).
I tried also the procedure for redownloding applications, and MAS showed both Xcodes (Lion and Snow Leopard) and OS X Lion. We see that buttons for Lion and Xcode for Snow Leopard say 'Install' but Xcode for Lion says 'installed' because there is an Install Scode in the Apps folder.
Thank you.
Maybe you are looking for
-
How to consume a secure web service?
Could someone post me an sample to invoke the certificate based secure web service? All I have is wsdl, certificate (.pfx file) and password and client jar file. Searching for the sample program to access the secure web service. I work on weblogic wo
-
Any way to use OBDC in SAP to access MySQL DB and retrieve data
I'd like to logon to an external MySQL DB (can de done easily enough with PHP) but I'd like to do it with ABAP if possible. Connecting via OBDC I should be able to retreive the data from the DB and then use it in my SAP application. Some databases
-
Problem Printing html page with JEditorPane...
Hello All, I Have a problem in printin html file with JEditorPane... My Html file contains a Table on it.. Problem is that JEditorPane displays the html file correctly but it prints the file without print that Table.. So pls help me... Thanx in advan
-
Manage stamps can no longer create transparent images
I created a dozen transparent stamps from TIFF and GIF images using Photoshop. They all worked fine until very recently. Now when I try to create transparent stamps with Manage Stamps, it puts a solid background - no transparency even with images tha
-
Can i have a selling price in material master
hi, sap gurus, can i have a selling price in material master if yes where if no why plz help me on this regards, balaji.t