I have a downloaded font file for a school problem on a flash drive and I do not know how to install it into my photoshop application. Need to be walked through this as I am an older user who does not understand any of this stuff.

I have a downloaded font file for a school problem on a flash drive and I do not know how to install it into my photoshop application. Need to be walked through this as I am an older user who does not understand any of this stuff.

Fonts are handled by your operating system and installed through the respective System Control panel (Windows) or Fontbook (Mac). On Windows simply type "Fonts" in the search bar in the start menu and when you open the panel/ folder use File --> Add Font. On Mac the procedures are similar, you just need to find the Fontbook app in Applications:Utilities.
Mylenium

Similar Messages

  • When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    Does Firefox switch to full screen if you press F11 ?
    You can also try the F10 key to see if that brings up the menu bar.
    * If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
    Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/")

  • Windows 2012 : A domain user who does not belong to the Administrators group can change the passwords

    Hello,
    Can a domain user
    that does not belong to the Administrators group,
    be able to change your password ?
    I tried to create a domain user account
    without administrative access. This user account have
    permission to access Windows Server
    2012 via Remote Desktop.
    I tried to access the same account
    to the Active Directory Users and Computers,
    i was amazed, because the user account it can  changed
    the password for multiple accounts,
    included one administrator account.
    Best regards,
    Ricardo

    Hi Ricardo, 
    I agree with Martin, we can check the membership about this user account. Besides, we can refer to following steps to check the memberships:
    Start the ADUC on windows 2012.
    Right-click the user account and select
    Properties, then click the Member Of tab.
    Check which group is the user account belongs to.
    In addition, i suggest you create a new user account, and check if the new account can change other user’s password.
    Best Regards,
    Erin

  • With the new version of ITune, I do not know how to add a podcast to a playlist.  The "add to playlist" which was easily found on older versions is not available.  Your help will be appreciated.

    I have difficulties with the new version of ITune, which I never experienced in the older versions.
    1.  I do not know how to transfer a new radio podcast to a playlist.  The previous option "show in playlist" does not appear.
    2.  I do not know how to download an older podcast from the list of available ones offered for download.  The latest one only is downloading, none other, not even the most recent but one.
    Your help will be greatly appreciated in these difficulties.
    I thank you in anticipation.
    Curnonego

    Continued at --> https://support.mozilla.com/en-US/questions/896391#answer-preview
    Moderator: Please lock https://support.mozilla.com/en-US/questions/896385?s=&r=1&as=s

  • I have a flash drive with 6GB of music.  How to import songs into iTunes?

    Foolish me, I was under the absurd impression that Apple, the company that brags non-stop about the functionality and user-friendliness of its software, would allow you to simply drag and drop music files into the iTunes window.
    Oh, how stupid was I.
    Drag-and-drop into iTunes? NONSENSE!!!!! That would be far too simple!
    Like literally everything involving iTunes, what should be an exceedingly simple process is far more complicated.
    So, how the heck do I get these 300+ songs in WMA format from my flash drive into iTunes?

    The problem is actually that you are trying to import WMA files into the Mac version of iTunes. WMA files can only be imported (and subsequently converted to AAC) in the Windows version of iTunes. You also have to have a version of Windows Media Player 9 or higher on the PC.
    Just an idea to throw out there. If you have access to a PC, import the songs into Windows Media Player, convert the tracks to MP3, put those on your flash drive and import to your mac.
    Hope this helps.

  • Find all users who does not have access to a shared mailbox.

    Hi all,
    We are in the proces of setting up a hybrid enviroment with our E2010 towards Office365. As part of that, we want to move several batches of users. The first bunch if users we move should not use any shared mailboxes etc. but how do I find
    those? I can see there are powershell scripts that find users who has a shared mailbox and then list the permission - but that is kind of the opposite than what I want :)
    Browsing manually through users is not practical either as we have 10000+ mailboxes at the moment.
    Hoping for a quick reply :)
    /Trev

    It is not possible to accomplish this by using powershell. Easier one is to get the list of people who has access on something with below and do easier data manipulation in Excel :
    Get-Mailbox -Resultsize Unlimited | Get-MailboxPermission | ?{$_.isinherited -eq $False -and $_.user -notlike "*self*"} | select identity, user,accessrights
    [url=http://www.lepide.com/]Lepide[/url]

  • I only have the exported .zip file for a project, can I import to captivate and make a .cptx source file?

    I am working on a multi-person team with Captivate 7. The CPTX source file cannot be located for one module. We have the exported .zip files in our Version Control system. Can I take these files and recreate the .cptx file. I don't mind having to recreate a little functionality, but am hoping to avoid starting from the beginning with this file.
    I know this can be done for RoboHelp files, was hoping some script existed for Captivate as well.

    You might be able to save a bit of headache by extracting the content of the zip. Likely a SWF will be inside along with other files. You could then play the SWF and capture the screens. Might save a tiny bit of effort.
    Cheers... Rick

  • Obtain a primary token for a user who does not have permission to logon locally

    I would like to know whether it's possible to obtain a primary token for a user who doesn't have permission to log on locally. If yes, what the recommended way is for doing that.
    I called LogonUserW with logon32_logon_network logontype for user which is not allowed to logon locally. It returned impersonation token. I called DuplicateTokenEx to create primary token but it still returned impersonation token.

    A Network Logon is always going to return an impersonation token.  This is by design. 
    A Batch or Service logon would return a Primary Token.  The user would need the corresponding right to return these 2 types of token.  Typically, all users are allowed to generate a Network Token (Impersonation Token) but as you have discovered
    it has limited usage which is by design.
    thanks
    Frank K [MSFT]
    Follow us on Twitter, www.twitter.com/WindowsSDK

  • How to change the path for a file download? Sometimes, I want to save a file in a specific folder in my hard disc and I don't know how to do it. Thanks.

    There is a default folder for the download of files from the internet ("Descargas" or "Downloads"). But, what can I do if I wish to save the file in another location of the hard disk?
    Thank you.

    Use about:config and filter on browser.download, you'll see them
    '''More information on configuration variables''' available in
    [http://kb.mozillazine.org/About:config_entries about:config (entries)] and for users not familiar with the process there is [http://kb.mozillazine.org/About:config about:config (How to change)]

  • Can I Share a document with a user who does not have righs to the site? (SharePoint 2013 on prem)

    Joe is in Sales
    He must Share a document with Jane in Marketing.
    He only wants to Share this one document.
    Does he need to go into the Sales site and add Jane as a site user? Jane will then be able to see everything on the site. No good.
    Does Joe now need to break inheritance on all the other site libraries from Jane to hide them??
    In a perfect world, Joe shares the doc with Jane. Jane gets email with link. Jane clicks link and goes to sale site where all she sees is the document that was Shared- nothing else.
    Cheers, Jim ___________________________________________________ If this was helpful please mark as an answer.

    With 2013, you can just Share the specific item. It will automatically break inheritance on that item and allow Jane to see that one document only and Jane will get a link inviting her to the document.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Does anyone know how to convert iTunes TV subscription downloads to files that I can put on a backup drive and watch on my TV vs. MacBook?

    I purchased a TV series from iTunes and downloaded the HD version. I then copied it to a backup drive so I could plug it in to my DVD player to watch. This would not work. Does anyone know how to convert the files so they are watchable on TV rather than on my MacBook?

    Video in the new iOS is under the application Videos. You should be able to find things there.

  • I received a text from another iPhone user who does not have an iPad, why did I receive the text on my iPad rather than my iPhone?

    I have both the iPhone and New iPad and I was under the impression when sending a text it went from iPhone to iPhone or iPad to iPad.  Also, if I send a text from my iPad to someone who only has the iPhone, it comes in on their iPhone.  However, I received a text from an individual who only has an iPhone and it came to my iPad and never showed up on my phone...Which means had I not been at home I would not have known I had a text on my iPad????  How does it determine which device it will appear on?

    You are probably right - I don't have my iPad with me and was confusing myself.  But on the iPad it is receive at email addresses only.
    Sending to the phone number will mean ONLY your iPhone gets the message.  If you want it to go to ALL devices, then you should have them send to the email address associated with the AppleID you used to set up iMessage originally.  Also set that email address up as your caller id on the iPhone so as you send out messages, people will reply to that and both your devices should get them.
    Although Apple's notes indicate you should be able to do it - http://support.apple.com/kb/TS2755
    what if you just type in a 10-digit phone number on the iPad instead of an email?
    (I originally did all this with iOS 5.0, and I know then the number did not work on an iPad, but maybe with iOS 5 updates, it does now?)

  • Have numerous download windows popping up that say that it is a firefox doc. Don't know how to stop

    I have the same download windows popping up repeatedly they say they are a firefox document. I have tried closing them but they keep coming back. I have opened them and nothing is there.

    Try "Reset Download Actions": http://kb.mozillazine.org/File_types_and_download_actions

  • HT4759 help I have deleted all my phone numbers and contacts from my I phone they are stored in the icloud but I do not know how to reload them into my phone

    I need help restoring my contact and phone number nformation backto my phone from the I cloud how do I do that

    Welcome to the Apple Community Mom Mom barb.
    if you are sure your contacts are still available at iCloud.com, then you've probably turned off contact syncing on the phone.
    Go to settings > iCloud and turn contacts on.

  • HELP!!!!!! I'VE DOWNLOADED AND INSTALLED GAMEBARIO2 BY MISTAKE AND I DON'T KNOW HOW DELETE IT!!!!!!!!!!!!, HELP!!!!!! I'VE DOWNLOADED AND INSTALLED GAMEBARIO2 BY MISTAKE AND I DON'T KNOW HOW DELETE IT!!!!!!!!!!!!

    HELP!!!!!! I'VE DOWNLOADED AND INSTALLED GAMEBARIO2 BY MISTAKE AND I DON'T KNOW HOW DELETE IT!!!!!!!!!!!!, HELP!!!!!! I'VE DOWNLOADED AND INSTALLED GAMEBARIO2 BY MISTAKE AND I DON'T KNOW HOW DELETE IT!!!!!!!!!!!!

    Welcome to the iMac user forum.
    Let me start with two remarks:
    1. To increase your chances of getting helpful responses, do not use all uppercase messages. This is considered yelling and rude.
    2. Each message has two parts: a title in the subject line and the actual body of the post. In your case, you could have that said in the subject: Need help with deinstalling Gamebario2.
    Following those simple guideline will help getting a resolution for your problem.
    Now: Do you know how to open a finder window? If not, just left-click once on the back ground image of your Mac and you will notice the top menu bar change to say 'Finder'. Then go to File and select 'New Finder Window'. Once you have that window, find the entry 'Applications' in the left part of that window and click it once. This is where you applications live. Find Gamebario2 in that folder, click it once, then drag it to the trash can.
    Let us know if you can't find GameBario2 in the application folder.

Maybe you are looking for