I have a LaserJet 5L printer and I can't get it running properly under 10.5.8 while it works fine under 10.4.11. It only prints the first document and then shows the queue and prints slow like ****, it says so, but nothing printed after30 minuts.

Hi.
I have problems to get my Laser Jet 5L running properly under 10.5.8. I prints the first page/document and then it says1,36 % printed than printing but nothing happens. Under 10.4.11 everything works fine, sometimes I have to get the print jobs running again,but then it works.
I have the Laser Jet 5L connected via USB to parallel.
I am running a PowerBook G4 1,67 GHz and 2 GByte RAM.
Best regards
LasertJet5LApple

Hello, since nobody has piped in yet...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x
1. To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
2. Choose System Preferences from the Apple menu.
3. Choose Print & Fax from the View menu.
4. Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."     As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

Similar Messages

TS1538 my 4th generation ipod touch is not recognize in itunes. it just displays the updating circle spinning then shows the apple then goes back to spinning. it is unusable now, what can I do

MY DAUGHTERS IPOD TOUCH HAD NO AVAILABLE SPACE LEFT IN MEMORY SO WE TRIED TO CONNECT IT TO ITUNES TO SAVE PICS TO MY LAPTOP AND THEN UPDATE IT BUT ITUNES SAID IT DID NOT RECOGNIZE THIS DEVICE. SINCE THEN, IT IS ONLY DISPLAYING WHAT I WOULD SAY IS THE LOADING CIRCLE SPINNING AROUND AND AROUND THEN SHOWS THE APPLE LOGO FOR A SECOND THEN GOES BACK TO THE SPINNING CIRCLE. IT CANNOT CONNECT TO ITUNES NOW BECAUSE ITS LOCKED BUT WE CAN'T GET THE MAIN SCREEN TO OPEN IT WITH THE PASSWORD...PLEASE HELP

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

WPF: How to make the first column does not show row separator and Left column separator in DataGrid?

Our WPF application uses DataGrid.
One of request is that first column of DataGrid does not show row separator and also does not show Left column separator. So it looks like the first column does not belong to the DataGrid. However, when select a row, the cell of first column still get selected.
How do we make it? Thx!
JaneC

Hi Magnus,
Thanks for replying our question and provide your solution!
Your solution works by setting "HorizontalGridLinesBrush" and "VerticalGridLinesBrush" to {x:Null} in the DataGrid style and modify "CellStyle" in first column as following:
<DataGridTextColumn MinWidth="32"
Binding="{Binding CellName}"
CanUserReorder="False"
CanUserSort="False"
Header="Cell}"
IsReadOnly="true" >
<DataGridTextColumn.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="IsEnabled" Value="False"></Setter>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridCell}">
<Border BorderThickness="0" BorderBrush="{x:Null}"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}" Margin="-1">
<Grid Background="{TemplateBinding Background}" VerticalAlignment="Center" Height="42">
<ContentPresenter VerticalAlignment="Center"/>
</Grid>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</DataGridTextColumn.CellStyle>
</DataGridTextColumn>
We found another way to achieve it by using DataGridRowHeader. The good way to use DataGridRowHeader is that we do not need to make the first column ReadOnly (click on first column does not select whole row anymore). Select RowHeader in a row will select
whole row. Move scroll bar horizontally, the row header still keep in visible area.
<Style TargetType="{x:Type DataGridRowHeader}" x:Key="dataGridRowHeaderStyle">
<Setter Property="VerticalContentAlignment" Value="Center" />
<Setter Property="HorizontalAlignment" Value="Center" />
<Setter Property="Height" Value="42" />
<Setter Property="SeparatorBrush" Value="{x:Null}" />
<Setter Property="FontSize" Value="16" />
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridRowHeader}">
<Grid>
<Border x:Name="rowHeaderBorder"
BorderThickness="0"
Padding="3,0,3,0"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}"
BorderBrush="{x:Null}">
<ContentPresenter HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}"
VerticalAlignment="{TemplateBinding VerticalContentAlignment}"
SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}" />
</Border>
</Grid>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
<DataGrid>
<DataGrid.RowHeaderStyle>
<Style TargetType="DataGridRowHeader" BasedOn="{StaticResource dataGridRowHeaderStyle}">
<Setter Property="Content" Value="{Binding CellName}" />
<Setter Property="Width" Value="35"/>
</Style>
</DataGrid.RowHeaderStyle>
</<DataGrid>
JaneC

Why does my iPhone keep showing the Apple logo, dimming, then showing the logo again?

Trying to update to iOS 8 and the phone keeps showing the Apple logo, then dimming after a number of minutes then showing it again.

Hello cgb1508,
Thanks for using Apple Support Communities.
From your post I understand that your iPhone will not boot past the Apple logo. To troubleshoot this issue please follow the steps in the support article below.
iOS: Not responding or does not turn on
Take care,
Alex H.

Can not get MS Outlook to sync with Cal or iTunes. Worked fine prior to the upgrade to 10.9.3

I want Outlook to be the primary calendar that I use to scheduling. Prior to upgrading to 10.9.3 this worked fine. I have tried every thing I know to get it work, Cold boots each app., turning off sync services on Outlook and restarting. Nothing I know works

What version of OS X were you running before upgrading to Mavericks?
Sync Basics
CalDAV & CardDAV are protocols used by Apple, Google, Yahoo and others to sync contacts and calendars. Neither Entourage 2008 nor Outlook 2011 support CalDAV or CardDAV.
You can no longer sync Outlook with an iPhone or iPad via iTunes. You can only sync with an iPhone or iPad via a cloud-based service like iCloud or Google.
You can no longer sync Outlook local calendars with OS X Calendar (formerly iCal). You can, however, continue to sync calendars hosted on a cloud-based service like iCloud or Google with Apple's Calendar.
You can no longer sync with any third-party apps running on your Mac that use Sync Services, like Entourage or Outlook.
If you want to stick with Outlook, I suggest you look at Office 365. Otherwise, moving to Apple Mail, Contacts and Calendar with iCloud might be a better option for you.
Until Microsoft adds CalDAV and CardDAV support to Outlook, there is no way to sync other than get an Exchange account. It's $4/month Exchange Online.
http://office.microsoft.com/en-us/exchange/microsoft-exchange-online-email-for-b usiness-FX103739072.aspx
UPDATE OS X
You mentioned you were running 10.9.3, you need to upgrade to the latest version of Mavericks.
OS X Mavericks 10.9.4 Update (Combo)
http://support.apple.com/kb/DL1755
Post Date: Jun 30, 2014
File Size: 958.2 MB

Printer shows up in System Preferences, Says Ready, but nothing prints

Hi, I migrated successfully last week from a G5 to a MacPro. My printer was working up until yesterday. It is an epson stylus photo 1400, connected by usb. I downloaded a new driver from Epson, but still can't make it work. Have run Tech Tool Pro, reloaded software several times. Printer shows up in system preferences window, and when I go to print it appears to be working, but then disappears from the list and never prints. Have been checking posts, but not finding an answer. Please help if you can. Thanks, S

Not knowing how you mucked things up when you locked yourself out or what you used with BatChnod, resolving things can be an issue. Check See Niel's guide. and ensure you've done things correctly. If resetting things appropriately doesn't do the trick, reinstall Snow Leopard, run Software Update, repair permissions, and restart.

I'm running windows 7 on my laptop and I can not get iTunes to properly download, why?

Having trouble downloading and running iTunes for windows 7.

Downloaded Mozbackup & backed up all bookmarks, extensions, passwords (not settings)
Uninstalled Firefox completely (Using REVO Uninstaller)
Reboot
Re-install Firefox
...Ran MozBackup & restored profile
Woo HOO !!
The problem was an add on: Hide Caption Titlebar Plus
Once I uninstalled that - the menu returned
Thanks for your support anyway

Printer will only print the first document then will do nothing.

I am running a dell system with windows 7 pro 64 bit.
I just got an HP LaserJet Pro 400 m401n printer.
I downloaded the most current drivers for windows and updated the printer from the HP website.
The printer will let me print the first document after the computer is restarted. Sometimes I can print a second document if I print it back to back with little to no time between printing the first document. If more than a few minutes passes and I try to
print again the program im using to print enters a "not responding" state and goes into recovery mode. This happens with notepad, excel, word, or even printing directly from the internet.
I can open the printer properties and see the document just sitting with "spooling" out beside it. I assumed it was a printer spooling problem and tried going to the Services.msc and checking the printer spooler. Ive started it and stopped it several
times. Ive also gone into %WINDIR%\system32\spool\printers and deleted all files in this folder. This does not help. It still gets hung at spooling.
Next I just went to printer property and turned the spooling off completely, by having it send the document directly to the printer. Again the exact same problem but instead of getting hung in "spooling" it now just hangs "printing".
I have also gone to the printer properties on the ports tab to see if disabling the bidirectional support was enabled as per a google search result showing a potential solution. But im connecting the printer directly to the computer via a usb port so that
option is not even available.
The only thing that allows me to print again is doing a restart on my computer, then again I can only print the first document sent. Restarting the printer itself does nothing.

Hi James,
Did this printer work correctly before ?
To verify whether it is related to the printer ,please plug it in another machine to have a check if it is possible.
Considering it is a USB device ,plug in with another port to have a check or try to update the USB controller driver or reinstall the USB controller driver to have a check.
Please check whether the Event Viewer contains errors or warnings related to this issue .
I found a similar symptom in the HP forum ,the solution in it may be helpful:
HP LaserJet Pro 400 M401dne print only one page (document)
(720 Views)
http://h30499.www3.hp.com/t5/Printers-LaserJet/HP-LaserJet-Pro-400-M401dne-print-only-one-page-document/td-p/6456104#.VK5gLHkfrwo
You may need to look for help from the HP forum at the same time .
Best regards

I had a crash of the mac 10.4.11 after I restarted my comp the google toolbar vanished and i can not get it back it does not install ((( all my bookmarks are there

I had a google toolbar on my 3.6 firefox for at least one year . After my Mac crashed and I restarted everything it vanished and i can not get it back I tried to reinstall it does not work and when i go to add ons it tells me it is not available for 3.6 Firefox All my bookmarks re there (((

Yup, your question and Diane's answer helped me also. Tho' I had had problems before getting into the iTunes store I always managed to find a way. Today they had me blocked cold with the "Update to 10" advert no matter what I did. Other questioners are being told, incorrectly as it turns out, that they have to update their OS to accomodate iTunes 10 and upgrade to iTunes 10. I did the download which did not take up much more room on my crowded old hard drive and now I'm back in business.

When trying to load multiple language versions of an ibook onto my iPad only the first document loads

We have a sales tool that we have created for one of our clients in iBooks Author. They need the iBook creating in various languages.
We need to be able to supply the multiple versions of the same document (in the different languages) to our client and they need to be able to install the different versions onto their iPads. And they want the options of having multiple language versions on the same iPads.
We have already created two language versions of the document (a US English and an International English version).
The two documents have different file names, (although they are based on the same document). We have just changed the spelling of some words accordingly. (And we will be producing other language variants based on the master file).
We export the two documents via the File > Export > iBooks option. Then we are using Dropbox to upload the two files. The files are then accessed via the Dropbox App on the iPad.
We can download the first document (International English) onto the iPad and view it as normal, but when we try and then download the other document (US English) it downloads in the Dropbox App, but when you click on view in iBooks it opens the first (International English) document into iBooks.
You can only appear to have one version of the document installed at any one time. If you delete the first one you can then load the second one fine, but not both at the same time. If the file names are different it must be getting the identity of the document from somewhere else.
This has only started happening since using iBooks Author 2.
Can anyone offer any suggestions please. I've tried changing the version number in the option on export, but this doesn't seem to affect the result.
Thanks in advance for any suggestions
John

Further to my earlier post we have now completed a test by saving our original document as a template, then creating a new document from the template, making necessary changes and saving as a new file. We can now upload the two separate versions to our iPad.
You cannot "duplicate" the file in any way, either by the File > Duplicate method from within iBooks Author or by simply Duplicating the original .iba file in the Finder, as this will cause the problem outlined above. By Duplicating you are obviously also duplicating this "hidden metadata" which is stored somewhere within the file which iBooks on the iPad is using to identify the documents. So unless Apple update the software to allow us to change that metadata we are stuck to using the Templates route. (Didn't have this problem on the last version of iBooks Author).
This works for what we are trying to do, which is create different language variants of the same book.
Working from Templates is probably the correct way to do it anyway, but might not necessarily be right for everyone.
Working in iBooks Author is proving to be a rather testing experience. You certainly need the patience of a Saint. Not sure it's of the standard we expect from Apple, but then I guess, as they are giving it away "free", they think they don't have to offer any support for it.
I think I would prefer to pay a fee for it and have a support route from Apple, rather than rely on a community of equally frustrated users who are all playing guinea pig and simply sharing their workarounds for a half baked product.
Good luck to everyone!!!

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused.

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused. I can manually send and receive faxes but I can not do it through the computer.

Try deleting the printer, deleting the job queue and reinstalling the printer again.

My Iphone 4 just updated to the iOS6. I've connected it to my computer for the first time since then, and wanted to back up my photos in iPhoto. However, although Iphoto recognized my phone, it shows no photos to upload or backup. ??

My Iphone 4 just updated to the iOS6. I've connected it to my computer for the first time since then, and wanted to back up my photos in iPhoto. However, although Iphoto recognized my phone, it shows no photos to upload or backup. It lists my phone in the "devices" category on the left bar, but no longer shows any of my photos.
Does anyone have any suggestions?

I've reread your question several times and am not sure I understand it.
Are you trying to basically start over, as if you just took your iPhone out of the box? If so, do:
Settings > General > Reset > Erase all content and settings

I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

My phone keeps resetting and then shows the icon to plug into itunes but when i do itunes tells me that it can't connect to my phone because it has a passcode and wants me to unlock it to connect. My phone only gives me the option to make emergency calls.

My phone started resetting today over and over and then shows the icon to plug into itunes. When I tried plugging in, a message pops up saying that itunes can't connect because my phone has a passcode and i need to unlock it to connect. my phone won't let me do anything more than make an emergency call. it wont give me the option to enter my passcode to unlock the phone. What can I do?

After a visit to the apple store, they were able to get through my pass code but unfortunately I found out that is was a problem with the logic board. Since Apple only wants to sell and not fix, I was able to locate an iphone repair near me that deals with logic boards and they are currently working on it right now. i should be getting it back soon. Im not sure if the problem you are experiencing is the same as i went through but it does sound like it may be also a hardware issue and would suggest searching online for an iphone repair place that can diagnose what exactly is wrong. Hope this helps.

My ipod touch will not charge or register in itunes. It keeps turning off and then showing the apple logo?

My ipod touch will not charge or register in itunes. It keeps turning off and then shows the apple logo. I have tried holding down the button and plugging it in. It will show the red battery for a second and then turn off? Any other suggestions?

I have checked for problems with the connections, but from what i can see with the naked eye, nothing appears abnormal. It is very strange, and very sudden. It just stopped in the middle of a charge. The apple store is my next step. I just wanted to see if anyone on here had some extremely eye-opening solution or check. thanks though!
I'm also within warranty, so it's not a huge problem.

I have a LaserJet 5L printer and I can't get it running properly under 10.5.8 while it works fine under 10.4.11. It only prints the first document and then shows the queue and prints slow like ****, it says so, but nothing printed after30 minuts.

Similar Messages

Maybe you are looking for