I have a MacBook Pro core 2 duo giving me Internet problems the error message I am getting is "connection timeout" any solutions ?

I have a MacBook Pro core 2 duo giving me Internet connection problems. Every other computer around me can connect to the Internet except me. The error message I am getting is "connection timeout" I've attempted to google solutions with no luck. Help anyone ?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.

Similar Messages

  • Macbook Pro Core Duo Battery Exchange

    Hey All,
    I would like to ask a question. I have a Macbook Pro Core Duo, the 1,1 model of 2006. I recently found out, due to some issues i had with the battery a long time now, that its battery is part of an exchange program initiated late 2006. I found online that the serial number of the battery matches (ends with U7SC). However, i cannot find the website and the link i find is dead (404 error). Do you think that i can still go to an Apple Store and request a replacement? I know its a long time, but there is still a replcement program for the 1st generation iPod Nano, so it doesnt seem unreasonable to me. Thanks.

    The original program provided a reasonable time period in which you were to apply for a replacement and return the defective battery. As I recall it was not an open ended program, but you can always ask. The worst that can happen is they say, "No." In any event, any battery you had from that far back would no longer be functioning today, anyway.

  • I have a MacBook Pro and tried to download and open the torbundle package.

    I have a MacBook Pro and tried to download and open the torbundle package. I get a message that reads "A copy of firefox is already running. Only one copy of firefox can be open at a time."
    1. I do not seem to have firefox anywhere of my computer. Ive been using safari and as far as my computers library is concerned there is no firefox.
    2. I have tried shutting down and restarting.
    3. I tried making a new user account.
    I believe the torbundle package is trying to open itself twice. Has anyone had this problem when trying to use tor on OS X?
    This is getting very frustrating! Help please!

    If you open Activity Monitor do you see a FireFox running? If so delete it.
    Have you tried deleting and redownloading/installing?
    Next:
    How can I get support?
    Your best bet is to first try the following:
    Read through this FAQ.
    Read through the documentation.
    Read through the tor-talk archives and see if your question is already answered.
    Join our irc channel and state the issue and wait for help.
    Send an email to [email protected]
    If all else fails, try contacting us directly.
    If you find your answer, please stick around on the IRC channel or the mailing list to help others who were once in your position.
    From:
    https://www.torproject.org/docs/faq.html.en

  • I have an older MacBook Pro Core Duo, I don't know if it is uprgradeable to OS X Mountain lion is it possible to tell via the S/n???  I'm already at Snow Leo. 10.6.8.  I'd like to be able to completely bypass OS X Lion  this may help determine if this is

    I have an older MacBook Pro Core Duo, I don't know if it is uprgradeable to OS X Mountain lion is it possible to tell via the S/n???  I'm already at Snow Leo. 10.6.8.  I'd like to be able to completely bypass OS X Lion.  Any one have any input that might shed light on my situation?  Thanks in advance for your input. 

    Your MacBook can not be upgraded to Lion or Mountain Lion. Snow Leopard is the highest possible for that model.

  • What will happen if I install Lion on my macbook pro core duo??

    What will happen if I install Lion on my macbook pro core duo? I have one of the first Intel MacBook Pro's with a Core Duo processer, I'm having hard drive problems so want to format it and re-install my OS. I can't find my Snow Leopard disk so the easiest thing to do would be to download Lion but I have been told that my MacBook needs to have a Core 2 Duo processer so I just wondered if anyone else has tried Lion on a MacBook like mine??

    Nothing.
    Lion will not run on a core duo, it needs a core 2 duo as a minimum
    see Technical Specifications
    Also you will need SL running to access the App Store to download Lion. So In a number of ways this won;t work.
    regards

  • Cant upgrade Airport Extreme on Macbook Pro Core Duo to 802.11n

    I have an original Macbook Pro Core Duo, purchased not long after Apple's announcement of "Bootcamp", and it has a "Wireless Network Adapter (802.11 a/b/g).
    From what I can tell from various documentation around the web, this should be upgradable to 802.11n with Apple's 802.11n Enabling software, however it tells me that the hardware is not compatible.
    If anyone can suggest what I am doing wrong, or whether I miss out, that would be good.
    Also, assuming it can not be upgraded, will running my local Airport network in "802.11n 5GHz 802.11a compatible mode" affect the speed of my other 802.11n devices on the network?
    Thanks.

    So you're basically saying 'Link Speed' shows the current connection? If so, the problem resolved itself. Sorry, my bad. Thanks anyways.
    (My Time Capsule hasn't arrived yet. I'm currently using an older version of Airport Express.)
    Another thing. When I asked at the local Apple Center for the 802.11n card, they told me, the card itself is not sold separately and even if so, it could not be exchanged, since it's unremovably attached to the logic board. Why do they tell the customers something like that? I mean, if Apple doesn't want the users to make changes like that, fine. Then they should say so. But why make up stories in order to dissuade people from their ideas? Is that common policy?

  • Ram limit in macbook pro core duo

    hi
    I was wondering what the limit of the macbook pro core duo is. I know it says 2 gb but has anyone tried a 2gb chip + 1gb chip? I also know the core2's can do 3gigs.
    I have had laptops that thave worked with way more than the specs said. My pismo's limit according to apple was 512mb ram I have had 1GB in that for many years. I think the 512 mb chip was the larges one at the time the computer was released so thats what was reported. is it the same thing with the first generation macbook pro's?
    thanks
    t

    According to Apple's specs the limit for the MBP CoreDuo is 2 GBs. The limit of the Core2Duo is 4 GBs although only 3 GBs is user accessible.
    The spec limit for the Pismo is 1 GB (512 MB per slot.) When new models are released sometimes there isn't RAM available to suit the limit of the model, so Apple can only certify a max based on what's currently available. You will find this is true of many older Mac models such as the Pismo.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • MacBook Pro Core Duo 1.83 GHz fans (0 rpm)

    Working on a friends macbook pro core duo 1.83GHz 1,1 - It’s been shutting down intermittently; he’s been using a laptop cooler and it helped some. I installed iStat Pro and  SMC Fan Control and neither the left or right fan are spinning (0 rpm). I figure dust bunnies preventing fans from turning; took the top case apart and much to my surprise it looks as though the fans never spun. Ever! Not a speck of dust inside either one. I powered it up and neither even tries to spin; trying to jump start them with a push does nothing. All connectors look solid, nothing burnt.
    Any suggestions other than new logic board?

    Depends. Are the fans simply not working? Are they connected to the motherboard? Is the motherboard not working? Have you tried
    Intel-based Macs: Resetting the System Management Controller (SMC). There may be any number of explanations none of which you can know without taking it in for repair unless you have the repair equipment and know-how.

  • Macbook Pro Core Duo froze and now boots into grey screen

    I was using my macbook pro (core duo) and just had a few apps open when it froze. I could still use my mouse but nothing else was working including force quit.
    When I restarted my computer, it did the spinning wheel and apple screen and then went straight from that to a grey screen, to never come back again. Sometimes it flashes to black before entering the grey screen.
    I did applejack and it finished with no errors...
    I booted with the command option p and r.
    I tried verbose and it gets past that and then gets stuck again at the grey screen.
    Safemode boots and works fine (except my airport isn't detected) and probably some other things don't work.
    I searched through other problems but couldn't find one that fit these specifications.
    Any help would be graciously appreciated.

    If safe boot works then it is probably a startupitem, launchagent, or launchdaemon that may be failing.  Look in your /Library/LaunchAgents, /Library/LaunchDaemons, and /Library/StartupItems.  All these are suppressed in a save boot.  You could start experimenting by removing all you see in those.  Or if you have some hunch of what may be a possible culprit delete that. Or one at a time.  Whatever.
    When I say delete I mean just temporarily remove them.  Observe ownership and permissions when putting them back.
    Note, I don't know why any of those items would suddenly start to fail just because you machine went south.  Perhaps some plist or other data got corrupted.

  • Some possible good news for MacBook Pro Core Duo owners....

    All,
    I believe I am now running 2.4GHz 802.11N on my MacBook Pro Core Duo.
    I have a Belkin F5D8071 ExpressCard installed.
    I also have the new Airport Extreme.
    Before I got the AE, I tried to run the 802.11N enabler with the Belkin card installed. No go. The enabler said my hardware didn't meet the minimum requirements.
    But, I received my AE yesterday and installed the Airport Utility on the MacBookPro while the Belkin card was plugged into the ExpressCard slot.
    As I was watching the installation, I noticed that the enabler installed!!!
    So I switched the AE to N only 2.4GHz (Belkin support has no mention of support for 5GHz N for the F5D8071). And my MBP joined the network!
    So I investigated some more. I opened Network Utility and it said my link speed was now 144Mbps. And the MAC address began with 00 17 3F. That is registered to Belkin. The Belkin card was active! But I saw no power light on the Belkin card. So I went into IORegistryExplorer and found the entry for the ExpressCard, it said the IOVendor was Apple. So what I THINK is happening is the Apple Driver is now recognizing the Belkin card and the driver just doesn't know how to drive the lights on the card. But it does recognize the chipset on the Belkin card. Which Belkin says the chip is made by Airgo.
    I ran a quick speed test by copying a 1GB file from a wired PowerBook to the MBP. It only took 12 minutes to copy!!! Sweet!!! I have "N" speeds on a Core Duo MacBook Pro.
    Now one limitation is the Belkin card does not support 5GHz. But there is hope for CD MPB owners. Hope this helps others.

    I have a February (very early) MacBook Pro Duo. I bought the Belkin F5D8071 card, plugged it in and installed the Airport Extreme software including the system 802.11N enabler. I set the AE to the 802.11N only mode and it does not work! Any suggestions? I would think that Belkin will eventually come out with their own soft ware patch for OSX. Thanks.
    MacBook Pro Intel Core Duo   Mac OS X (10.4.8)  

  • 802.11n for MacBook Pro Core Duo's no problem!

    From a post on xlr8yourmac.com:
    " So I was really ****** about only having G because of being an early adopter. So I started looking what could I do about it. Browsing the net, I found out that the new core2duo machines actually use a broadcom chip (Actually as mentioned here previously, the Core2Duo MacBook/MacBook Pros use the Atheros AR5008 Chip, although the Mac Pro uses a Broadcom chip (not sure on chip version no.) - the Apple 802.11n enabler supports both. See notes on Mac 802.11n page here.-Mike) and this chip is the same one in Dell Wireless 1500 adapters. (Dell notebook mini card)
    I bought one of those Dell 1500 cards on ebay, (I searched google and found the Dell 1500 card for as low as $52.xx, although an ebay auction had over 100 of them at $90 "Buy it Now" price.-Mike) and using the great guides on ifixit, change the card on my machine.
    (He didn't mention which CoreDuo Mac he had (Macbook? Macbook Pro? iMac? Mini?) but I'm assuming a Macbook or Macbook Pro since iFixit's guides don' t cover the intel-based Mini or iMac.-Mike)
    On boot, the card is recognized (and even more stable than the older one). The enabler didn't want to work (wouldn't install I assume he means) on my system though. So I opened it in pacifist, (available here-Mike) and moved the file to the System folder, and magic! I have draft-N in my macbook coreduo
    Hope you can publish this and it helps someone.
    -Julian"
    William

    Just out of interest, where's the third attenna?
    802.11n might work on the chip, but you won't get 11n
    performance without the third attenna.
    Regards
    Paul
    Ok, here is the scoop, I installed the AirPort Card from a Mac Pro and it works fine. I do have an issue with my Verizon DSL router Westell 327W. It does not like the new card. So I can not connect to it. On the other hand the AirPort Express and the new Mac Pro card in the MacBook Pro love each other. The range is unbeliveable! I am reluctant to update to the 802.11n enabler right now since reading all the problems with it in the other discussions.
    I am going to disable the wireless feature in the Verizon router and hard wire a connection to the AirPort Express and see how that works...
    So MacBook Pro (Core Duo) first generation can be updated to take advantage of 802.11n.
    William

  • 23" Display + MacBook Pro Core Duo?

    Just ******* after an 23" Apple Cimima Display (ACD). But wondering wether or not my laptop will be able to drive it properly.
    I have a MacBook Pro 15.4" with a 2GHZ Core Duo Processor with 1GB of RAM and the ATI X1600 GPU with 128 MB of RAM. I'm a bit annoyed I opted for 'only' 128MB, 256MB would have really increased the shelf life of the computer.
    When I play new games on the maximum resolution (1440 x 900) I can't have all the graphics options on other wise it goes a bit 'jumpy'. Does this mean that the even higher resolution on the 23" ACD will make it worse. Also I noticed Cover flow is a bit jumpy sometimes, is that because of my measly 128MB?
    And does the ACD work well in Windows XP and or Vista.

    i am running the MacBook Pro - Core Duo 2GHz with 23" Apple Cinema Display, and there are no issues running native resolution (1920x1400) with games like Warcraft III: Frozen Throne and World Of Warcraft. The book will handle it nicely... also do not get put-off by the v.ram being 128MB, is very unlikely you will be able to run the full video ram resource, unless you generate 3D animations, etc.

  • Macbook Pro Core Duo 2.16Ghz with 1GB+2GB memory module

    Is it possible to install an 2gb modulle along with my 1gb module witch came standard with my macbook pro Core Duo 2.16Ghz?
    Im thinking about the following modulle:
    Kingston KTA-MB667/2G
    (Any other suggestions?)
    And just for my information is it possible to install 2x 2gb memory?
    Thanks!

    But i still have a few questions:
    Is the 2gb modulle not supported or the total of 3gb
    is not supported?
    I want to know it absolutely 100% for sure becouse i
    would love the 2gb addition. And i don't want a buy
    something wrong :P
    From what I have read in various forums a single 2GB module will work in the Core Duo machines. 3GB is not supported however. People who have tried adding 3GB (2GB +1GB) to a Core Duo report the computer would not boot.
    I am not sure why you would want to use a single 2GB module though. Perhaps if you were wanting to upgrade to a Core 2 Duo later?
    I would say if your going to try to use a single 2GB module understand the risks. i.e. I don't how much people actually tested for stability etc. other than to try it and say yeah it works. You do loose the dual-channel configuration for whatever that is worth.
    I would make sure you purchase from a place that has a liberal return policy if your going to try it. Just in case your not happy with it.

  • I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

    I have a macbook pro core i7 mid 2012
    And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • 17" macbook Pro core duo = LCD LP171WE2 replace with LP171WU6

    Removed the cracked LCD  from my 17" Macbook Pro core duo 2.16
    The part # is: LP171WE2 TLA2
    Newer mac's use the following lcd part #'s:
    LP171WU6-TLA2, LP171WU6-TLB1, LP171WU6-TLB2, LTN170CT10
    My question:
    Will the newer lcd's work as a replacement for my older one?
    Anyone with the technical knowledge on this please reply.
    Thank you

    Another option:
    This site states the: LP171WE2-TL-03 is interchangeable with the LP171WE2-TL-A1.
    http://www.ipartscity.com/ProductShow.asp?ID=239

Maybe you are looking for

  • Powershell / Scientific Notation Woes / Formatting Output to Live Excel Sheet

    I have a WMI query in a script that dumps machine information to a live excel sheet. I find when I query the model # of the machine using (this line of code from the script): $Sheet.Cells.Item($count,4) = (Get-WmiObject win32_computersystem -Computer

  • Importing Master Data Hierarchy from BW Infobject

    I am importing from top level node(text hierarchy) of BW infobject Account. All the records are rejected with the following error. It says that Hierarchy nodes include dimension members that do not exist. The reason for this is that it is top level t

  • Any Solutions to the 320gb WD harddrive and upgrading to SL?

    Really need a solution to the 320wd hdd problem. I have one mac and really dont want to take the harddrive out and do it that way. Plus in the future i dont this hassle again when i do fresh installs. For people that dont know the problem, everyone w

  • How to get Album Artwork added for entire library?

    Press Ctrl + B this will show the menu bar then follow these steps 1. file.- 2. Library - 3.Add Album Art.Hope this helps and enjoy entire library of art work.

  • Can't login after upgrade...

    I've just updated a 24 inch iMac (Aluminium 2.8ghz 4GB RAM 1TB HD) from 10.4.10 to Leopard, and when I log in to the main account (the 501 admin account), the screen fades to blue and then login screen fades back up after a few seconds. It just won't