I have a macbook pro. what equipment do i need to watch my computer on my flat screen tv?

i have a macbook pro. what equipment do i need to watch my computer on my flat screen tv? thank you.

Step 1. Peek in the back of the TV and identify what kind of inputs it has. Ideally, you'd want an HDMI socket, followed by a DVI or in worst case, analog VGA. Try to determine what's the "native resolution" of the panel.
Step 2. Based on what you find, peruse in the Apple Store (Mac Accessories / Cables section, if online) for the appropriate dongle/converter. One end goes to the Thunderbolt/MiniDisplay Port on the Mac, other end depending on the output to feed to the TV. Also buy the corresponding cable of the desired length.
Step 3. Plug everything together. You have to decide whether to use display mirroring (Mac & TV show the same thing) or separate displays (each shows different stuff).
Step 4. Based on 1 and 3, open System Preferences / Displays and adjust screen resolution(s) for optimum viewing pleasure. The Mac's display usually far exceeds the external display's max resolution capabilities, so you have to downsize as needed, if in mirroring mode.
Step 5. Enjoy the results.
Edit: If your TV has HDMI input AND your MacBook Pro is a Retina, you can skip the first half of step 2. The Mac already has HDMI output port, so you just need the cable.

Similar Messages

Macbook Pro - What Equipment do I need to hook my Macbook to speakers for a banquet hall?

Hi Everyone!
I was asked to be in charge of music at my Aunts Wedding Shower in a few weeks, I was going to make Playlists on my Macbook Pro, I just need to know what type of equipment I need. I will prob rent a speaker from a music store, but is there a specific plug in I need? Or some sort of mini switch board that connects from the laptop to the speaker? Or a cable?? please advise
Its going to be held in a banquet hall for about 90 people...
Hope to hear from someone soon!
Thanks!

Your Macbook Pro can not fully provide enough sound for a banquet hall unless you're using speakers with a built in AMP.
Here's what you do - get a normal AMP or Receiver and connect your speakers on the audio out of the AMP/Receiver. Now with the image you see below - connect the 1/8" jack to your headphone jack of your Macbook Pro and connect the RCA jacks in the Line In or AUX in of the AMP/Receiver - on your AMP/Receiver, there is a selector in from that selects CD/PHONO/Line in - select Line in so you can hear the sound/music from your Macbook Pro.
It is however, much better to use a Mixer as Adam93T states. But you will need more cables unless you use a mixer with it's own AMP built in.
Good luck

Macbook Pro - What Equipment do I need to hook my Macbook to Speakers?

Hi Everyone!
I was asked to be in charge of music at my Aunts Wedding Shower in a few weeks, I was going to make Playlists on my Macbook Pro, I just need to know what type of equipment I need. I will prob rent a speaker from a music store, but is there a specific plug in I need? Or some sort of mini switch board that connects from the laptop to the speaker? Or a cable?? please advise
Its going to be held in a banquet hall for about 90 people...
Hope to hear from someone soon!
Thanks!

Your Macbook Pro can not fully provide enough sound for a banquet hall unless you're using speakers with a built in AMP.
Here's what you do - get a normal AMP or Receiver and connect your speakers on the audio out of the AMP/Receiver. Now with the image you see below - connect the 1/8" jack to your headphone jack of your Macbook Pro and connect the RCA jacks in the Line In or AUX in of the AMP/Receiver - on your AMP/Receiver, there is a selector in from that selects CD/PHONO/Line in - select Line in so you can hear the sound/music from your Macbook Pro.
It is however, much better to use a Mixer as Adam93T states. But you will need more cables unless you use a mixer with it's own AMP built in.
Good luck

I have a macbook pro what virus protection should i install?

I have a macbook pro, what virus protection should I install?

1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't actually been tested by Apple (unless it comes from the Mac App Store), but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. For most practical purposes, applications recognized by Gatekeeper as signed can be considered safe.
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could find some other way to evade Apple's controls.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is presumably effective against known attacks, but maybe not against unknown attacks. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. Beyond XProtect, Gatekeeper, and MRT, there’s no evidence of any benefit from other automated protection against malware. The first and best line of defense is always your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
That means, in practice, that you never use software that comes from an untrustworthy source. How do you know whether a source is trustworthy?
Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself from malware.
7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.
Why shouldn't you use commercial "anti-virus" products?
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
8. ClamXav doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
ClamXav is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
ClamXav may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use ClamXav unless a network administrator requires you to run an anti-virus application.
9. The greatest harm done by security software, in my opinion, is in its effect on human behavior. It does little or nothing to protect people from emerging threats, but if they get a false sense of security from it, they may feel free to do things that expose them to higher risk. Nothing can lessen the need for safe computing practices.
10. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.

HT1338 i have a macbook pro 10.6.8 and need to upgrade to mavericks 10.9 what do i need to do.I also run a windows parrellel that has my comapny software and quikbooks on it.

i have a macbook pro 10.6.8 and need to upgrade to mavericks 10.9 what do i do - i also have a paralel for windows with company software and quikbooks.

Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
If this is a company computer or is used with company software, I suggest you do not upgrade to Mavericks without first checking with your company. Older software may not work with Mavericks. Some of it may need upgrading, and that may be something your company is unwilling to pay for.

I have a macbook pro and I connected a new iphone to my computer. Somehow all my pictures in the iphoto app deleted. How can I get them back, and no I do not have my TimeMachine On. Please help!

I have a macbook pro and I connected a new iphone to my computer. Somehow all my pictures in the iphoto app deleted. How can I get them back, and no I do not have my TimeMachine On. Please help!

If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108

I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Maverick for everything but the dictation software. I'm a new pie to apple

I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Mavericks for everything but the dictation software. I'm a newbie to apple

To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.

I have a MacBook pro. When I turn it on all I get is a grey screen with a small grey spinning thing under the apple. What can I do?

I cannot turn on my MacBook pro. When I turn it on all I get is a grey screen with a grey spinning thing under the apple. Can anyone help?

Reinstall OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
====================================
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless.

Hi I have a MacBook Pro 2011 i7 and it stays on for about 4 hours then the screen go's fuzzy and I have to turn it off by the power button has anyone had this problem thanks mike

I Have a MacBook Pro i7 2011 it stays on for about 4 hours then the screen go's all fuzzy and I have to turn it off by the power button has any body else had this problem thanks mike

My guess would also be a failling connection between your logicboard and your GPU. See 2011 MacBook Pro and Discrete Graphics Card
For most users it starts with some random crashes and freezes like you describe it. And then it just gets worse and worse. There are still no "good" solutions, sadly. This is a hardware problem from the production.

I have a MacBook pro 2011. And I need help

hi . I have a MacBook pro 2011. And I recorded some videos on aSony camcorder and the camcorder is not comparable with iMovie. And I only nowhow to use iMovie and nothing else. So is there any movie-transferring downloadI can use so I can use iMovie?

Have you checked all of the iMovie compatibility articles on Apple Support?
Apple may not have tested your camera with the current release of iMovie, but it might have done so in prior versions (8 [09], 7 [08], 6 [06], 5 [05], and 4 [04])
If your camera outputs MPEG-2, there's a solid chance that iMovie 9 will properly read its data, as has happened in the case of one 2007 Panasonic SDR-H18 that was not listed past iMovie 6 (this is my own grandmother's camera, which was only supposed to work with some cheap-as-dirt compositor, from a no-name in Japan that pushed its wares also to Fujifilm, JVC, and Olympus). In '09 my grandmother and I went out for Snow Leopard. I installed it without delay, but the Panasonic compositor would frequently crash while previewing a clip post-upgrade. After getting a big runaround from the phone techs, one of them dropped the iMovie hint. A bit more digging through the Apple boards (right here) pretty much sealed things up. The camera worked then, and still works today.
As to other formats, I don't know. Best I can suggest is to give your camera a go at your new Mac (or the other way around).
Nate

I have a macbook pro running 10.6 Snow Leapord, is there a way to split the screen like I could with my old windows computer? So I can watch or surf on one and another task on the other?

My laptop a macbook pro is my only connection with the outside world, I would like to be able if possible to watch or stream video content to my bigscreen tv as I easily can via the 1080 connection available on the two of them.
But I would like to be able to keep the video playing on the external TV screen and use the computer screen to view other content on the web simultainously is that macbook pro posterous or MB Propetually possible?
Any other part of this post below is 100% unnessisary and invalid with relation to my posted request for help leading to any answers resolving my situation thanks. Have a wonderful full life always with respect for self and all that is creation.
***********************************Excuse the added little incorperation of incredably creative crud keeping it clean but cra? with a P was ment to fit.
Please just open your heart and help a Lep, Snow Lepord that is with down syndrom operating it thats me!
There are many endless things life has to offer, but only for those able mentally to perform the details involved with the task, ask Jesus he tryed teaching others how to walk on water but they persisted with leaving it up to figments of heavenly spiritual imagination, I guess maybe he made a bad choice with his teachers he intended on taking it to spread among the others throughout the world?

With the external screen connected and turned on, open the Displays pane in System Preferences. On the screen containing your menu bar, you should now see a Displays preference dialog box with an "Arrangement" tab in it. Click the Arrangement tab. Uncheck the box for "Mirror Displays," or make sure it is already unchecked. In the image within the preferences dialog box you should see two adjoining blue rectangles representing your two screens. A white bar on one representes the menu bar and indicates that that is the primary display. The larger rectangle represents your TV screen. If it's on the right side of the smaller rectangle representing your MBP's screen, then dragging a window off the right side of the built-in screen will move the window onto the TV.
Now open any application window — a web browser window, for example — and drag it by its title bar to move it off the edge of your built-in screen onto the TV screen. Got that? You can do the same thing with any other window, including a DVD Player or VLC window containing a movie that you want to watch.
Things to note: In this dual-display mode, which is called Extended Desktop mode, the menu bar and Dock will always appear on only one of the screens, and you can choose which one they appear on by dragging the white bar representing the menu bar from one rectangle to the other in the System Prefs > Displays > Arrangement tab. You can also set the resolutions of the two screens independently of each other. The highest available resolution on each screen will always provide the sharpest image.

I want to buy a 15 inch retina MacBook Pro what configruation do I need?

I would like to buy a 15 inch MacBook Pro with Retina display but can't decide on a confiruation to get. Here are the things I do on my computer
Use all of the pre-loaded apps Mail, Safari, etc.
Download more from the Mac App Store
Import pictures from my iPhone 5 and iPad 4 and edit them in Aperture
Use iLife and iWork
My budget is around $2600
I will either customize it so it cost less than $2600 or just buy the standard $2199 model.
Please let me know what you all think as to what configuration I should buy!
This will be to replace my 17 inch MacBook Pro from April 2010 whitch has a 2.53GHz Intel Dual-Core i5 processor, 4GB 1067MHz RAM, 500GB Hard Drive

If I were configuring a Retina model, I would make sure that I ordered the maximum 16GB of RAM and the 512GB solid state storage. If that's $2,600, then go for it.
Through MacMall, that configuration is $3,183.99. But I think that it would be worth it.
Good luck,
Clinton

I have a Macbook pro with Retina Display, and need to get bootcamp. Which one should I get so I can install Windows 7?

I have to have windows so I can use CAD and photoshop for my classes. Any suggestions?

Boot Camp Assistant is in your Utilities folder. You will have to purchase Windows somewhere. Preferred would be 64-bit Windows 7.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

I need help scrolling and highlighting for a vast amount of pics that I'm trying to transfer. I have a macbook pro osx 10.5.8

I need help scrolling and highlighting for a vast amount of pics that I'm trying to transfer. I have a macbook pro osx 10.5.8

I need help scrolling and highlighting for a vast amount of pics that I'm trying to transfer. I have a macbook pro osx 10.5.8

I'm having lots of trouble finding semi-decent equipment at an affordable price. I would like to start a podcast with two hosts and I have a macbook pro that i purchased in april 2011. any suggestions?

I'm having lots of trouble finding semi-decent equipment at an affordable price. I would like to start a podcast with two hosts and I have a macbook pro that i purchased in april 2011. any suggestions?

I should keep it simple - if you start getting involved with mixers and multiple microphones you will find the cost escalating alarmingly. If you can get yourself a decent microphone and spend some time doing tests to find the best way of balancing the voices you should be able to get acceptable results. You can't plug an ordinary microphone directly into a Mac - you would need a mixer or a preamplifier - so it's probably worth looking at USB mics. I don't know what cost range is available, and you would have to check that they would work with your Mac. Otherwise you will need an ordinary moving-coil mic and probably a USB audio converter which can accept a microphone - look at the Roland site.

I have a macbook pro. what equipment do i need to watch my computer on my flat screen tv?

Similar Messages

Maybe you are looking for