I have a ploblem: My Ipad already connected wifi. But I cannot use the safari application or App Store.It's showing "the Internet is not connecting". How to solve this problem?
What will I solve this problem?
You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.
Similar Messages
-
I have an apple id myself which my children share, i am trying to set up an apple id for my daughter but it says that the id already exists?? which it shouldnt!
I have tried taking her Mac and ipod off my devices but it still wont let me set it up!! any ideas anyone??Hello, Wyseup.
Thank you for visiting Apple Support Communities.
Most likely this email address has been attempted to be setup as an Apple ID at some point. You can reset your Apple ID password via the steps in the first article below. If you do not have access to the email account, need assistance or are not receiving the password reset link, see the second article.
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H. -
I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?
If you have a data only plan for the iPad with your carrier, if no change after powering your iPad off and on you will need to contact your carrier.
-
I have disconnect jeck from iPad 2 3G wifi but status jack remainder... So i not hear ...
It sounds like the switch may be stuck. Put the plug in and out a couple of times to see if that frees it up. Also, you might reboot the pad to see ifthat makes it reset. If that does not work, and if it is a broken jack, a trip to the store may be in order
-
After I upgraded to ios6 , my iPad gmail was something wrong because it always hang and switch off the App automatically . It is very irritating . Please let me know how to solve this problem because I have to read my email everyday . Thanks .
Double tap Home button, delete Mail from multitask-bar.
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data. -
why my device had "no service" ..I have follow a few instruction from you tube how to solve this problem but all failed. Please help me .TQ
See if anything in this support document help http://support.apple.com/kb/ts4429
-
My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
how to solve this problem? '' can not activate cellular data network failure'' authenticating PDP from already thank you
What does this have to do with using an iPhone in an enterprise environment?
What carrier are you using and where did you get the phone? -
My iPad is locked up and has a apple and a bar under it on the screen and it will not turn on or off. Anyone know how to solve this problem?
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
In most of my email attachment the logo ( Mimi attachment ) show and I can not open that attachment , why and how to solve this problem ???
iPad 2, iOS 7When did this start? What was the last thing you changed before problem started?
Have you tried sending the attachment from a different account. Have a friend send you an attachment. Get a gmail account.
Send the email with attachments to two different accounts one to your ipad and the other to a gmail account in a web browser and not on an iPad. See if you can read the ones to the gmail account.
You did reboot your ipad?
Standard stuff for ipad.
http://www.my-iguru.com/ipad/ipad-hints-tips/ipad-viewing-saving-email-attachmen ts.php -
I have a problem .. I can not download and update some applications from App Store as it asked me for apple ID I don't know this email.. How I can solve thi problem
All content from iTunes is tied to the account that downloaded it, so the id that shows when trying to download updates should be the account that 'owns' that app. Do you recognise the id that is showing e.g. has anybody else downloaded or synced content to your iPad ?
-
Already purchase applications through apple ID is not showing in apps store purchase history of apps and If I try to download the same application in apps store its showing paid application in apps store with using same apple ID account.
Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items. -
Why My iPad 3 iOS 6 apps stores can't show the iPhone apps
Why My iPad 3 iOS 6 apps stores can't show the iPhone apps..
Devices connecting to the app store are detected and the appropriate apps are shown for the device...for example, a Mac OS X computer will only display the Mac App Store apps, an iPhone will only display the apps that will work on the iPhone, an iPad will only display the apps that will work on the iPad, and in this case there are apps that work on both the iPad and iPhone so those apps are displayed but not the iPhone-only apps.
-
i restored my ipod touch .bt again it display as"ipod is disabled.connect to itunes'wht shall i do nw.i wanna get it back.i restored nt in my computer.help me to solve this problem !!!
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPod.
Take special note of the article about using recovery mode. Many times, that is the only way to bypass the pass code and restore the device.
IOS: Wrong passcode results in red disabled screen
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US
This will tell you how to restore
http://support.apple.com/kb/HT1414
If you cannot restore that way, you may have to use recovery mode.
http://support.apple.com/kb/HT1808 -
Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!
Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help.
Maybe you are looking for
-
I�m hoping someone may understand the cause of the LabVIEW crash I�m experiencing. LabVIEW 6.1 crashes and Windows 2000 says, "LabVIEW.exe has generated errors and will be closed by Windows" when I try to load an llb by clicking on the top-level vi f
-
How to set "Cc" field in Dynamic Email address in Receiver Mail adapter
I have done the configuration for setting up the dynamic email address using the XSD provided by SAP in note no 748024. It is working fine. Michal's blog Mail Adapter (XI) - how to implement dynamic mail address. was a gr8 help in doing this. But t
-
I've been nose down in numerous Flex resources and due to the abundance of "options" hope those more experienced can provide clarity (thanks in advance for all responses btw). 1.) Flex can connect in various ways to various data providers -- but pres
-
Unable to read sounds in my library.
hello, I have a little problem, when I open a new audio track, none of my library sounds works, I can't read them. whereas when I open a software instrument track, everything works. what can I do? what manipulation have I got to do to read the sounds
-
Order header text needs to be copied to Invoice Header text
Dear All, i am putting some header text in the sales order,i want the same to be copied to the invoice header text,pls guide how to do the same as soon as possible. Regards, AKD