I have a power mac G5 2.7ghz / cpu G5 3.1 which airport card do I use? I'm guessing A1126 but just want to double check
Not sure which air port card to use... though all indications point to A1126 Ariport Extreme with blue tooth.
Correct? yes or no...
Thank you...
Yes, it is.
Similar Messages
-
Which Airport Card do I need for a Dual 2 Ghz Power PC G5 (2.2) It says PowerMac 7,3. Not sure what year the unit is from, and I'm confused on which Airport Card to purchse.
Nick.Hi Nick,
If other than an Airport card is acceptabl;e, these work better & have better Range...
http://eshop.macsales.com/item/NewerTech/MXP2802GU2/
http://eshop.macsales.com/item/NewerTech/MXP3802NU2C/
http://eshop.macsales.com/item/NewerTech/MXP2802NU2CR/
And if you need Bluetooth...
http://eshop.macsales.com/item/IOGear/GBU421/ -
Greetings. Power Mac G5 2.7GHz. (Yes, water cooled, but no leaks ...yet!) Tiger 10.4.11 Only one hard drive, the other bay is empty. Can I clone that drive by putting the new empty hard drive in the lower empty bay and use Disc Utility. Currently I do not have this computer on the internet, I assumed it would not matter. (Of course, I am writing this question from a different computer.)
Yes.
(79203) -
I have a Power Mac G4 and i am trying to get it to work with my LCD
I have a Power Mac G4 and i am trying to get it to work with my LCD Monitor/TV. The connection on the computer is DVI and the connection on the Monitor is DVI. The Monitor says in the manual to hook up computers using the DVI connection. When I connect the too the monitor says there is no video input. I tried changing the settings on the monitor from PC mode to DVI mode and nothing. I have also tried changing the display on the computer to a couple of different settings and nothing. Please Help?
Hi-
A little more info please.
What model G4?
What Graphics card?
What OS?
What model/make of monitor?
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, 23" ACD, Ratoc USB 2.0, QCam Ultra, Nikon Coolscan -
I have a power mac G5, and now that I've updated my iphone 4s to ios6 I can no longer sync it or back it up to the computer. what can I do?
Click here and install the software.
(71121) -
I have a power mac, the hard drive is struggling, I have a new hard drive ready to install, after I pull the old one and put the new one it's place and place the old one in the next slot ready to transfer data....how do I start this next step. Do I down load OS, and go to utililities...please just a step by step after hard drives in position.
Hi Susan, you must have a Mac Pro, Powermacs cannot run 10.6.x
Anyway, once you Install the new drive, you likely must Format it...
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html
Then Install the OS & on first boot of the new install, after a step or two, avail yourself of Migration Assistant & Migrate everything. -
I have a Power Mac G5 Dual 2.3 running 10.5.8, I understand that I can not upgrade to Lion, so what will happen to my Mobile me, which I can not live with out? Also will I be able to get Icloud to work?
Hi Mary, the other so called "Features" of iClound will not work for like Syncing, but eMail will.
MobileMe & dot Mac will still work last I heard.
iCloud Mail setup, even in 10.4/10.5…
Don't delete your old account yet. Just setup a new one in Mail>Preferences>Accounts, little plus icon. Choose IMAP as account type, not ,mac or MobileMe.
IMAP (Incoming Mail Server) information:
▪ Server name: imap.mail.me.com
▪ SSL Required: Yes
▪ Port: 993
▪ Username: [email protected] (use your @me.com address from your iCloud account)
▪ Password: Your iCloud password
SMTP (outgoing mail server) information:
▪ Server name: smtp.mail.me.com
▪ SSL Required: Yes
▪ Port: 587
▪ SMTP Authentication Required: Yes
▪ Username: [email protected] (use your @me.com address from your iCloud account)
▪ Password: Your iCloud password -
Hi, I have a power Mac G5 with an airport card, MAc OS X 10.5.8, Wireless card is Airport Extreme ( 0x14E4,0x4E ) and I am having a hard time connecting to my regular NETGEAR router. PLS Help,
Thanks,
MishcadolaI spent 2750 $ for my 24" iMac (price for my region)...
And the perfect world of Steve Jobs still close, but never we've been in there! -
I have a power Mac G4 with a mirror front running 10.4.9. How current of an OS can I run on this machine? I want to put it back into use but need to upgrade the OS so that I can run the newest version of Quickbooks amoung other things.
I think you're out of luck...
System Requirements:
Minimum System Requirements
Mac with an Intel processor
Mac OS X v10.6
1 GB RAM
CD-ROM drive for installation
120 MB of available disk space
Printer: 100% Macintosh-compatible printer, if you plan to print invoices, checks, deposit slips, lists, purchase orders, mailing labels, reports, or graphs
Checks: Use Intuit Checks if you plan to print checks. Canadian Image Ready Cheques are not supported.
Integration/Compatibility Requirements
Export report data requires Numbers '09 (included with iWork from Apple) or Microsoft Excel 2004 or 2008 for Mac.
E-mail requires Apple Mail; Microsoft Entourage 2004 or 2008 for Mac
Back up to MobileMe requires paid MobileMe account available separately from Apple, Inc.
iCal, iChat, and AddressBook are included in Mac OS X. Internet access required for iChat.
Accepting credit and debit cards directly into QuickBooks 2011 for Mac requires Intuit Merchant Service for QuickBooks for Mac (sold separately); subject to application approval and debit card transactions are processed as Signature Debit which does not require entering a PIN code. See http://payments.intuit.com/legal.jsp for details.
Processing payroll, integrated with QuickBooks for Mac, requires paid subscription (sold separately), EIN and Internet access. QuickBooks 2011 for Mac works with Intuit QuickBooks Payroll for Mac.
http://www.amazon.com/Intuit-413615-QuickBooks-2011-for/dp/system-requirements/B 003YJ8WFE/ref=noref?ie=UTF8&n=229534&s=software -
I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive
,what program can I used to transfer one hard-drive data to another hard- drive on this mac pc.The Disk Utility, Carbon Copy Cloner, SuperDuper, or similar software. For best results, place the second drive inside the computer or in a FireWire enclosure and boot the computer from it before removing the internal drive.
(66989) -
I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?
Do it with a Firewire cable (buy a 800/400 adapter if you need it) - the USB transfer takes a much longer time.
Start up your old PowerMac G4 holding down the "T" key, for target disk mode.
On your new MacBook Pro open "Migration Assistant" in your utilities folder.
Connect the 2 computers by firewire cable and follow the prompts in Migration Assistant. -
In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel. I can boot up and use for about 5 minutes before the mouse freezes. I believe something is
overheating. What would that be - so I can have repairs done? The machine is the Digital Audio version, M7627LL/A and Serial Number XB******KXQ.
<Edited By Host>Hello USME,
'Tis a common problem on old Macs.
Do as Allan says: open the door and blow out all the dust bunnies. Canned air from Wal-Mart or Radio Shack can be handy (though sort of expensive) especially for blowing through the back of the power supply. A cool Mac is a happy Mac.
Be sure your Mac can breathe. The air intake is on the bottom of the case, so be sure a deep pile rug or too many papers on your desk are not blocking the air supply.
Feel the power supply and the processor with your hand. They should be warm but not hot; if you have to move your hand away, that's too hot!
Check the fan on the power supply, and on the processor if it has one. Take a flashlight and peer in the back of the (Mac) case through the grille; make sure the fan is turning. If it's not, the power supply won't work for long.
Fans are not considered serviceable, though they will succumb to mechanics of determination. A CPU fan is easy and straightforward.
A fan replacement will not cure an already damaged power supply; the PS may already be done for. Used power supplies for a DA are hard to come by, and not especially cheap when found (c.$50). An entire working DA or Quicksilver may often be found for under $100 on eBay, and swapping in your HD is easy and simple... this might be cheaper and more expeditious than repairing an expired DA. Replacing a power supply is fairly easy, but it's a nuisance and requires a 2mm Allen head wrench in addition to the usual #2 Phillips head screwdriver.
In my experience, power supplies and CPUs are about equally likely to fail. There are a few other possibilities, but they are not nearly so common.
Good luck!... Jon -
I have a Power Mac G5 - How can I run Matrox MX02 mini max
I have a Power Mac G5 Running Mac OSX 10.5.8 I recently got the MX02 Mini Max by Matrox to run my Final Cut Studio application version 6.6 and Im having problems with the pci board that comes with the matrox unit ( it does not fit in the mother board) how would i be able to use this with out connecting the pci board into my mother board on my Mac.?
Can't use it with a G5.
System requirements are Mac Pro and Intel-based MacBook Pro running Mac OS X Leopard 10.5.6 or higher.
IF (big if) the card is PPC Mac compatible, only Late 2005 G5 machines have PCIe. All other G5s are PCI.
The Matrox card is PCIe, not PCI. -
I have a Power Mac G4 with OX 10.4.11. I have previously burned DVDs with no problem. Now I've gotten two different sets of messages. One states that
the disc is not readable and an error code: 0x8002006D. The more recent message states the disc is incompatible and an error code: 0x80020025.
What is going on? I need to burn discs immediately for a conference next week."The more recent message states the disc is incompatible and an error code: 0x80020025."
The error (0x80020025) refers to an unsupported drive (not disk). I've read about relaunching the Finder to correct the problem. Choose "Force Quit" from the Apple Menu and then choose "Finder." Click "Relaunch" and see if the drive still produces the error. If there's no change, I'd be tempted to replace the drive. -
I have a Power Mac G5 running OS 10.5.8. What is the most recent version of iMovie HD that can run on this Mac?
iMovie 05 and 06 are sometimes referred to as iMovie HD. iMovie 08 and newer aren't.
(70198)
Maybe you are looking for
-
How to make a bean create an xml file..
How does one create an xml file from a bean? If anyone have the answer, or some sample code I would really apprecciate it!!! In advance thanx a lot!!!
-
Not possible to determine a condition type for the price in ME49
Hi, While saving the price in ME49 i.e. comparision of Quotation i am getting below error: Not possible to determine a condition type for the price Message no. 06657 Diagnosis When it attempted to generate the time-dependent conditions for the price
-
Open file by webbrowser instead of FP
Hi everybody! I have a fileReference and I want to open the file. Instead of using the .save method and getting the FP dialog to save it, I'd like to get de default webBrowser dialog (open it or save it). Does anybody know how to do it????
-
I am trying to use Photoshop 10. After my catalog loads. I am told to log into my account. My user name is correct and I use a new password. That password lets me log in to my Adobe account and even allowed me to load a 30 day trial of PS14i After I
-
Final Cut 5 not being Cute with Final Cut 4
Hello from France I went to this tv studio today with a some final cut pro 4 files i edited a few years ago, and we opend the files on a final cut pro 5 system. Final cut seemed ok to import the old files, and everything in the timeline looked ok. Ex