I have Acrobat Pro 10.0.1 and I can no longer create a new document

I just got a new laptop in May and installed Acrobat Pro 10.0.1 via my IT department. This may be the first time I have tried to create a new document since my last computer but I run into the problem of not being able to create a new file. Furthermore, I can't even convert a document. I get an error saying my PDFMaker files are missing and it asks if I would like to run the repair. After running the repair the problem still exists. I have been unable to find an update or patch for this problem.
Can anyone help?

The URL below is to Adobe's Acrobat update page.
There you'll find each of the incremental updates to Acrobat 10.
They must be installed one at a time in sequence. 
  http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
Now, if after attempted updates fail then you'll need to speak with your IT Department.
You need your install of Acrobat 10 updated to dot version 10.1.7.
Be well...
Message was edited by: CtDave

Similar Messages

  • I have just down loaded i cloud and I can no longer sync my own music from itunes I have tried to close my i cloud account and it wont close down?

    I have just down loade icloud and can no longer sync my old music in itunes I have tried to delete icloud but it will not delete?

    Are you sure that these times are still selected to sync in iTunes?
    When you connect your iPad to your PC and with iTunes running, select your iPad under the devices button in the upper right corner of the iTunes window. Then click on the Movies tab and make sure that the movies are selected (checked) to sync. Check the playlists in the Music tab as well.

  • HT1351 I have a Ipod Nano 5th edition and I can no longer sync, add or view my previously recorded music to itunes or windows. What can I do?

    I have a Ipod Nano 5th edition. 2 years ago I imported and exported my music files to my Windows 7 laptop and also to Itunes. It worked great. Recently I've tried to do the same and now I can't do either. When I plug in my ipod it is discoverable but I cannot view my music at all. I tried to sync new music I burned from CD's to the ipod, I keep getting a message that the music is already on it but it's not. It's updated, settings I believe are set correct and troubleshooting it, it reports no problems.  I don't know what else to do. Need Help!  Thank you in advance.

    Hey 9Cre114,
    I would try out restoring your iPod nano, that might resolve the issue. Restoring erases the iPod's disk and restores iPod to its original factory condition. You can read about how to do so here:
    Warning: Because restoring erases all the songs and files on iPod, back up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library. If you use the Nike + iPod Sport Kit, see this document for more information.
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    via: Restoring iPod to factory settings
    http://support.apple.com/kb/HT1339
    All the best,
    David

  • My Check Out and Open is creating a new document!

    Hi there,
    As the subject say, my Check Out and Open is creating a new document with a new ID instead of making a new revision of the document.
    It creates a new document starting the revision with the number 2! And if I make Check Out and Open of this, it creates a new document with the revision starting on 3.
    I can´t get a list of revisions of a document... it creates allways a new one...
    Can you explain me why? I really need to fix this.
    Thank you,

    Hi
    Yes the behavior is normal and thats because COAO is doing 2 steps in one viz checking out a content and also opening it for Editing. So effectively you are combining these 2 actions into one. So the content is checked out and hence shows up in the My checked out content.
    As for the DIS and COAO , I have not seen a way other than this of working , dont really know why this is the case but I haven't found out a way for making it work in a normal way. Once DIS (WEI) is uninstalled the COAO works normally as in a new revision for that content is checked in .
    Hope this helps
    Thanks
    Srinath

  • I have Acrobat pro on an old pc with windows 7, and now want to download it on a new pc with windows 8. i found the serial number, but I don't know how to download it.

    I have Acrobat pro on an old pc with windows 7, and now want to download it on a new pc with windows 8. i found the serial number, but I don't know how to download it.

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date.

    Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date.

    Problem is that my pdf files look terrible although I have MacBook Pro (Retina, 15-inch, Mid 2014). I have Adobe Creative Suite Design  Standard version 6.0 (Mac). I have installed every possible update. I think problem is that for some reason my CS doesn´t support retina display? If I view a pdf file in iMessage, it looks fantastic. But if I open the same document in Adode Acrobat Pro, it looks awful. What can I do?
    Thank you so much for your help.
    Pekka
    Pekka Saatsi
    arkkitehti SAFA
    SAATSI arkkitehdit oy
    Bysmedsintie 56
    06500 Porvoo
    040 5955933
    [email protected]<mailto:[email protected]>
    www.arks.fi
    Anubha Goel <[email protected]<mailto:[email protected]>> kirjoitti 24.3.2015 kello 4.10:
    You have been mentioned
    by Anubha Goel<https://forums.adobe.com/people/Anubha+Goel?et=notification.mention> in Re: Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date. in Adobe Community - View Anubha Goel's reference to you<https://forums.adobe.com/message/7335644?et=notification.mention#7335644>

  • I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

    I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

    On my laptop when I open up a pdf file and do a search for a particular
    text phrase it prompts me to run a character analysis.  Whereas on my mac
    mini, when I try to engage the same process it just says it couldn't find
    the phrase and doesn't even try and run a character analysis. I tried
    clicking on the tool bar and the recognize text tab but nothing there seems
    to do anything.
    In trying to figure out the issue on my own I noticed one thing.  I run a
    small law firm in St. Louis and I scan in all my files to which are
    subsequently emailed to my outlook account where I will save them as pdf's
    to their respective folders.  On my laptop when I open up an email from my
    scanner I see the image of a acrobat document next to the attachment
    paperclip symbol.  However, when I open up the same email on my mac mini I
    notice instead of an acrobat file image it shows a Preview file image (the
    program used to open up pdf's before I installed acrobat).
    Hope this helps!
    Sincerely,
    Jonathan McAllister

  • I have Acrobat Pro and ExportPDF together. I would like to cancel ExportPDF (annual).

    I have Acrobat Pro and ExportPDF together. I would like to cancel ExportPDF (annual).

    http://helpx.adobe.com/x-productkb/policy-pricing/cancel-subscription-acrobat-online-servi ces.html

  • Acrobat Pro 8.1.12 and Acrobat Reader 9.0 crashing when trying to print

    The subject line says it all, but I upgraded my MacBook Pro to Leopard 10.5.5 and now when I select File | Print I get the spinning beach ball than Acrobat crashes. Now oddly, if I use Acrobat Reader 7.0.9, it prints perfectly. But have Acrobat Pro 8.1.12 crash every time the File | Print is selected is a major problem. And no, not even the dialog box comes up first, Acrobat just goes down.
    Has anyone else seen this? I saw in the forum others were have problems creating PDF's, something I haven't done yet.

    Try the following: (I have no idea if it will help but might be worth a shot.
    Its possible That you need to update the driver shown in Printer Utility.
    Locate Adobe PDF 8.0 (what evr the latest version is.
    Now delete from Printer Utilities List, and quit Printer Utility.
    Now open Acrobat 8.1.2 and go to help menu.
    Now choose reapir or Replace.
    uncheck PDFViewer and check Adobe PDF
    Now click okay to repair.
    If you have acrobat 9. all previous acrobat versions will work with the Adobe PDF 9.0 Driver just fine. It just will not try to use new features added since 9.0.
    Also, It possible that your Print Driver for your printer has been updated with the new Sysytem Upgrade.
    If so remove the printer listed from the Printer Utility List.
    the click on add printer. look for the driver for your printer listed choose make default then quit.
    Try Acrobat 8 again and then go to set up menu see if you can find your printer listed. is so choose and save as default.

  • First question - I have Acrobat 9 on my desktop and the license seems to have been messed up.  I tried to download and fis but I asked me for a disk.  I don't have any idea where the "disk" is.  Can I get the license update without that disk?

    First question - I have Acrobat 9 on my desktop and the license seems to have been messed up.  I tried to download and fis but I asked me for a disk.  I don't have any idea where the "disk" is.  Can I get the license update without that disk?
    Second question - In anticipation of not being able to do that, I bought (at University bookstore) Acrobat XI Pro - do I need to uninstall the 9.0 Pro version before I try to install the XI version?

    If you still have your serial number for Acrobat Pro there is a link to the installer here:  Download Acrobat products | 9, 8

  • I have Acrobat Pro 9 installed on Windows 8

    I have Acrobat Pro 9 installed on Windows 8 and it asked me to download Adobe Reader 11.0.09 Font Packs - Asian and Extended Language Pack but it says I need Adobe Reader XI to be installed first.  Will this pack work with Acrobat Pro 9?  Is there a different pack for Acrobat Pro 9?  Thanks for any help.
    Also: I am not doing anything with languages other than English.  I don't read them or write them.  I just use English. Why do I need such a pack?

    Hi Hanoch ,
    Compatibility of Acrobat 9 with Windows 8 could be a reason that you are facing such an issue.
    As Acrobat 9 is an older version ,that could be one of the reasons it is prompting you to download the Reader 11.0.09 Font Packs.
    Would request you to check for an update first ,and if it fails try switching on to the latest version of Acrobat ,i.e 11.0.10.
    To check for Updates.
    Launch Acrobat>Navigate to Help>Check for Updates.
    You may also want to refer to the following link.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5508
    See if that helps.
    Regards
    Sukrit Dhingra

  • I have acrobat pro but I can't open pdf files now.

    I have acrobat pro  But since a few days ago I can't open any pdf file anymore.If I try with reader I do,but not with acrobat pro.
    I need help please.

    Do two steps and then retry. Open Acrobat and then
    1. Help>Repair
    2. Help>Updates
    Since it had been working, I assume there was no change in OS or Acrobat.

  • I have QT Pro 7.6.6 and want to delete all audio (5 tracks) from a selected in-out section of a .mov file. Then, add new audio. How do I do that?

    I have QT Pro 7.6.6 and want to delete all audio (5 tracks) from a selected in-out section of a .mov file. Then, add new audio. How do I do that?

    If I 1) knew TeX well enough to fix it, and 2) could get the guy to answer the phone or email so as to give me the sourcecode or to fix it himself, I wouldn't have bothered figuring out that the thing could be fixed one page at a time by a) getting a copy of acrobat pro, b) figuring out how to turn on all of the extra toolkits, c) finding the edit object button in randomly named toolkit, d) right clicking on the chapter title and selecting the e) ever so obvious "delete clip" menu selection.
    At this point I would absolutely love to never have to touch an adobe product again in my life, but my hand has been dealt and if I'm going to print the manual for a software library that we've spent a cumulative $70,000 for, I have to figure this out and I really don't want to have to hit [Page Down], [Ctrl] + [A], Right click, delete clip for >700 pages.
    I felt certain that once I'd figured out how to shift the pages down using ghostscript so first two lines of each page weren't getting cut off in the printer non-printable region, and finally figured out this that a relatively simple scripting solution would be immediately apparant.  I mean, there are APIs for both applescript and javascript, but I'm mystified by how to get to the edit object feature from within them, much less how to tell that feature to delete clips for everything on a page.

  • I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help.

    I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help. What do i do?

    I have not contacted Adobe. I am using acrobat pro CC, and haven't noticed any problem with the software itself. The only problem I have had so far is when I try to download.

  • How can I import comments from shared reviewer who doesn't have acrobat pro?

    How can I import comments from shared reviewer who doesn't have acrobat pro? I sent out a shared review, but not all of the reviewers have acrobat pro, they do have acrobat reader 9 and have made comments on the document, but they do not appear when I open the shared review from the workspace. Can I import his comments so that they are apart of the shared review?

    I figured it out, so I will share just in case anyone else has this issue...
    The reviewer emailed me his comments on the document. I opened it and made a comment. When I went to publish my comment a dialogue box opended asking if I wanted to publish his comments to the shared review for him. Says yes and the reviewers comments are now published and a part of the shared review.

Maybe you are looking for