I have Adobe Acrobat 9 Standard on both of my computers.  Some time ago, one crashed my computer and I had to reinstall the operating system and all applications.  After I had installed once Acrobat 9 Sdt in the computer, I wanted to update the software v

I have Adobe Acrobat 9 Standard on both of my computers.
Some time ago, one crashed my computer and I had to reinstall the operating system and all applications.
After I had installed once Acrobat 9 Sdt in the computer, I wanted to update the software version 9.0.0 update to the same level as it was before the crash and that the other computer has version named 9.5.5.
The system for update from version 9.0.0 does not work at all. "There are no updates" listed in the dialog.
Can you advise how I get my Adobo Acrobat 9 Standard (Version 9.0.0) could be updated to the same level as the computer had before the crash.

ftp://ftp.adobe.com/pub/adobe/acrobat/win/9.x/

Similar Messages

  • Forgot the passcode to my ipad. When I went to restore it, it asked me if I wanted to update the software so I said yes. It then went into recovery mode, I'm guessing, with the connect to iTunes showing on the screen. Now iTunes will not recognize it??

    Forgot the passcode to my ipad. When I went to restore it, it asked me if I wanted to update the software so I said yes. It then went into recovery mode, I'm guessing, with the connect to iTunes showing on the screen. Now iTunes will not recognize it so I have no idea how to get it back! Help!!

    Then you will need to try restoring it once more:
    Placing your device into recovery (DFU) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • What happened to my adobe account? I paid for lifetime membership some time ago?

    What happened bo my adobe account? I paid for lifetime membership some time ago?

    Hi Rose,
    I've checked your account; you have an active subscription to ExportPDF (tied to the same Adobe ID/email address that you use here in the forums).
    What account are you looking for? Adobe doesn't offer "lifetime" membership, but does offer subscriptions that are billed monthly or annually until you cancel.
    Best,
    Sara

  • Why am I suddenly getting the following error message: "The specified location is reserved by the operating system and is not permitted. Please choose a different location." I've been recording all night and I haven't changed any of the parameters.

    Why am I suddenly getting the following error message: "The specified location is reserved by the operating system and is not permitted. Please choose a different location." I've been recording all night and I haven't changed any of the parameters.

    Hi Tom,
    Looks like we have problem here as we see another blank post from you here. It's probably something to do with your email. Let me send you a PM with my email address and we can communicate that way.
    Thanks,
    Kevin

  • I bought a second hand Macbook Pro and colorful stud Only after a few months I decided to reformat it Bad movie started here I did not get it with a disc and I come to install the operating system And he asks the name of Apple's user ID financed had been

    I bought a second hand Macbook Pro and colorful stud
    Only after a few months I decided to reformat it
    Bad movie started here I did not get it with a disc and I come to install the operating system
    And he asks the name of Apple's user ID financed had been bought Lion OS Now
       And who sold me does not answer then I found the phone number of his mother
    She said he lived in USA and paid him more than the lion version of the MacBook and now I can not install Lion
    And I'm not from USA

    Unless you go back to the original owner, yes you need to pay for it again.
    You're entitled to the OS that shipped with the device from Apple, but if you don't have that media there's nothing you can really do.  If the system originally shipped with 10.7 or 10.8 then when you boot it to Internet Recovery, it will automatically offer you that OS version (as the serial # is registered with Apple).  If it shipped with an older OS, then you need to enter the Apple ID that purchased 10.7 or 10.8.  You didn't purchase it so that's not you.
    The options you have are to buy Lion for $29 US (I don't know the price in Palestine), or Mountain Lion for $19 US (don't know the price in Palestine either), and install from scratch.
    And it's a good idea to know you have restore media before you reformat your machine.

  • Is downloading the operating system erase all your files

    Is downloading the operating system erase all your files?

    If you're upgrading through the App Store, no, it will not. However, always best to run a backup before doing any major upgrade.
    Matt

  • I have the original iPad and want to upgrade the operating system and do not have a home computer available to go through iTunes to upgrade it. Is there a place that I can take it to upgrade it for me?

    I have the ipad1 and want to upgrade the IOS system and do not have a home computer to do it. Is there someplace I can take it and have it done for me professionally? I checked with Best Buy and they declined.

    A physical Apple Store. If you want to do it yourself, you can use any computer with an Internet connection.
    (88243)

  • Had to reinstall my operating system, so basically i got a new computer...reinstalled itunes and now my iphone 4 will not sync. it connects, then backs up then starts sync and says "cannot connect because there is not enough free space on the phone."

    There is enough spacde on my phone. It is the exact same itunes library because i saved all my music before i reinstalled windows. So i just put all the music back onto itunes. It asked me if i wanted to erase and sync because it was a "new computer" and i said yes because it is all the same music so it should just re sync all the same stuff. But it wont do it. It just keeps saying there is not enough space on the phone, and my phone has 5 GB left on it.

    Maybe iTunes is calculating it like this:
    5 GB left, but if you sync your music (from the new PC) to it it will be full. It's maybe syncing the new content and then deleting the old music.
    Try this: Deselect "Music-Syncing" and let him delete the music from your iPhone. (the other stuff, photos, cal, contacts should stay untoucht if you don't deselect it) After iTunes deleted the music from your iPhone (by letting the other stuff untouched) try to reselect "Music-Syncing" and iTunes will sync your music to your iPhone.

  • I have updated the operating system and cannot find how to link my apple tv

    How do you close open apps with the new operating system. Used to double click and then tap on open apps and delete them to save using up power?????

    Close Apps
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe up on the screenshot of the app you want to exit.
    3. The app will fly off the screen

  • I am unable to connect to the itunes store. I have tried via wifi and cellular. Operating system and itunes are latest versions. Have powered down the ipad and restored settings. Can puchase new songs and apps with no problem....just can't update apps.

    I am unable to connect to the itunes store to update apps on my ipad.
    I have tried both wifi and cellular connections.
    I have the most recent updates of the operating system and itunes.
    I have powered down and reset and restored.
    I have no problem purchasing and downloading new apps or songs.
    Please help!

    Refer to this article"
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368

  • Why is my hard drive full when I only have the operating system loaded and nothing else?  No pics, music, nothing...It's the 60 Gig hard drive on the air built in late 2010.

    Why is my hard drive full when I'm only running the operating system and nothing else is loaded?  No music, pics, nothing! I understand the hard drive is small at 60 gig, but I can't believe the os would take up that much space.

    First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free on the startup volume for normal operation. You also need enough space left over to allow for growth of your data. Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space. Proceed further only if the problem hasn't been solved. ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root. Back up all data now. Launch the Terminal application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal.

  • Why does my computer look the same? I reinstalled the operating system.

    My mid-2012 Macbook Air has been running a bit slow, and I've had problems with other things, too. So I decided to reinstall the operating system and start from scratch.
    But after restarting my computer in rescue mode, everything is the same. I backed up my documents and photos and fully expected my computer to look like it did when it was brand new. So this is very confusing for me.
    I clicked the button for reinstall. Why wasn't everything wiped clean?
    Also, the fan is running loud since the install. It's been maybe seven minutes. Why would that be happening?
    Thanks.

    Thank you for the help. Much appreciated.
    The only confusing part was not quite knowing which option to select for the erase. Three different options appear in the left sidebar. One said something like Mac Hardware, so after some hesitation I chose that one. I wish there was a blurb that helped people understand what these are, in case they end up chosing the wrong one and permanently damaging their computer.
    But it looks like I chose the right one, thank goodness. My computer is noticeably faster now because of the erase and reinstall.
    Cheers.

  • Only cloning the operating system.

    I've created clones of my hard drives before, using carbon copy cloner. but are there any utilities that clone only the essential files and folders that are needed to boot? Or do i have to install from an installation CD to do that. Completely cloning a system takes a long time and I'd like to find out a way to clone just the operating system and the necessary files for it to work.

    Hmm. The SuperDuper! documentation says:
    Backup – user files is similar, but it does not create a bootable backup.
    Instead, it only backs up user specific files in the Home directories of the
    various accounts on your system (as well as the special iSync files that are
    stored elsewhere in Panther). This type of backup is not bootable, since it
    doesn’t contain operating system files, but is useful for storing copies of your
    personal data. It’s much harder to recover from a disaster if you’ve only got
    your personal files backed up.
    Is there any kind of program or option where it only copies operating system files, as i want to cut down on the time needed to create a clone. I usually keep my files somewhere else so if i have a bootable drive, I can copy the files from another drive. Unless SuperDuper! does a much quicker job of it than CCC. It took CCC around 4 hours to completely copy my drive, which had around 140GB on it. Maybe the huge amount of space taken up might've contributed to the relatively slow processing.

  • Error -2147024714 : Automation Error the operating system cannot run %1'

    Post Author: greg.thompson
    CA Forum: General
    After installing Crystal Reports 10 Pro, I am receiving the following Business Objects error "Error -2147024714 : Automation Error the operating system cannot run %1" While trying to run reports within Business Objects 6.5 SP 2 HF 932, The desktop O/S XP Pro w/sp 2. Tried uninstalling both, reinstalling  twice did not solve the problem. I switched the install order the second time, also used all default install locations, any ideas here.

    Post Author: greg.thompson
    CA Forum: General
    After installing Crystal Reports 10 Pro, I am receiving the following Business Objects error "Error -2147024714 : Automation Error the operating system cannot run %1" While trying to run reports within Business Objects 6.5 SP 2 HF 932, The desktop O/S XP Pro w/sp 2. Tried uninstalling both, reinstalling  twice did not solve the problem. I switched the install order the second time, also used all default install locations, any ideas here.

  • The operating system can not detect my wireless device!

    Hi all,
    I am using windows server 2008 for the operating system and lenovo 3000 G430 for the laptop. but the operating system can not detect wireless device, on devices manager always show the drivers for this device are not installed! i tired for find and search the right driver. anyone have same problem with me and have solving this problem? or at least has same equation the operating system and the laptop series.

    The problem is you have 2008 server on your laptop. The only thing you really can do is try all the wireless drivers here http://consumersupport.lenovo.com/ot/en/driversdownloads/drivers_list.aspx?categoryid=486030
    IT Specialist and Consultant
    Lenovo Tablet Evangelist
    Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
    Deutsche Community   Comunidad en Español
    Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Maybe you are looking for