I have an imac and I set up additional user accounts. When I start up or restart the computer it only shows me the option of logging on as the system administrator and it does not show the other accounts for my wife and kids.
When I start up my additional user accounts do not show so I can log onto them. The same thing happens when I log out as the system admin. How do I get to the additional accounts that I have set up on my imac so I can log in under them. Thanks
There is zero advantage to partitioning a HD for the purpose you have described. I recommend that you take your machine to an AASP, describe the problem and they will help you get it back working. Partitioning a HD is a 1990's approach and is of no value what-so-ever unless you installing multiple operating systems on the HD. In that case it would be valuable.
Good luck.
Similar Messages
-
i've updated my iphone 3gs software to the latest version of ios and now my device does not activate. i've searched for help here and it still doesn't work...is there anything else i can do, or i have to take the device back to the store?
Where did you buy this iPhone and how did you unlock it?
-
Hi All,
This is my first post to ms exchange forum am getting Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
with exchange (rest IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
Exchange 2013 CU6 with server 2012 Std 64Bit
Thanks,
MuraliDear All,
I have found the solution for above problem, the problem has occur due to PopProxy inactivity
please find relevant exchange management shell commends below.
1. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Inactive
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Active
2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
-State Active
3. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Active
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Activ
Replace yourmailserver.com with your server host name.
Thanks -
I'm trying to figure out how to NOT store my mail on the iCloud server. I was directed to first go to ""system preferences," then "internet and wireless," and then "mail, contacts, calendars," except I don't have a folder for "mail, contacts, and calendars." Why wouldn't it show up?
I'm on Macbook Air, OS 10.6.8Thanks, it was linked in iPhoto. After removing it from iPhoto I still got the same message when trying to delete the account from Mail. After rebooting, I was able to remove the account from Mail.
-
Secured sites are not showing that little padlock on the bottom right corner,like the old version of firefox did, indicating its a safe site, example banking,emails etc etc.not sure weather im safe or not please explain.
The padlock has been removed in Firefox 4 and replaced with the [[Site Identity button]]
Install this add-on to get it back: https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/ -
Administrator name and password does not work in other accounts
My hard drive died so I had one installed. I reinstalled contents from TimeMachine. When my son is in his account and he is prompted for the Administrator's name and password I type in the required info but the shaking text box indicates that my admin name and password are wrong. I tried to unlock the System Preferences and same thing happens. When I am in my account, I have no problems. How to I make it so I can change, install and fix things when I am in another person's account?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I did the upgrade and adobe no longer starts up when I load a PDF file. This is frustrating and I have had to stop using Firefox
https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox
https://support.mozilla.com/en-US/kb/Opening+PDF+files+within+Firefox -
Restored machine. Opened Firefox - all is well.
2. Closed Firefox. 3. Clicked on Firefocx shortcut - no Firefox ran. 4 Clicked on Firefox in program list - no Firefox ran.
5. Restored to the previous restore point; clicked on Firefox shortcut - Firefox ran.
== This happened ==
Every time Firefox opened
== a month ago.Thank you for your help Nattgew.
Boinc is already running in the background as a service. There is no need to run "boinc" on the command line. The error you see is because it is trying to start Boinc again from the command line, but the service is already running and has claimed the port 31416.
I know, it was in order to give all the possible feedback.
I'm not sure why boincmgr won't connect... could you be more specific about what happens when you run it?
No, I can't be more specific than I've already been above. I've described all that I see that happens.
Other than that, the wiki tells you where to look at the log file (make sure there are no errors there) and explains the password for connecting (sounds like you already took care of that, but good to double check).
As you can see I've searched all the errors I got in the boinc wiki. I know what they mean, but not why are happening.
I think my problems come from a bad management of the files permissions by the package installation. I mean, when a package is installed there should be an script or something that modifies (or create the files with) the permissions that files must have, or create the groups that need to be created, and so on. But it looks like I have to modify all this data in order to get boincmngr connect to boinc, boinc and boincmngr get the writting permissions in the installation folder too, etc etc etc. I don't know very well how to do all this stuff (I mean that I've already created by hand the boinc group, changed the execution, access, modification of files with users and boinc groups credentials, and I still get silly errors as "boinc can't write" in a folder which is the owner, or can't write executed by the root. All this stuff messed me up because looks too much stupid), but more important, I shouldn't to do it manually after a package installation.
I should open a bug report in arhlinux first and if they can't solve the problem open it in the boinc support, I suppose. -
I keep fixing this problem and it keeps returning. It happened to ipod touch also. Batteries are charged. 10.2.2.14 itunes
It may have something to do with a conflict with any antivirus or security software that you may be running. I don't know if you've read this, but here is Apple's support article for Windows. You say you keep fixing the problem - I assume you mean by reinstalling iTunes?
http://support.apple.com/kb/TS1538 -
I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
do I have to partition it and name it first. -- if so just one partition?Do this:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation. -
Securtity Update 2008-006 failed, now volume does not meet the requirements
After observe by 15 minutes that the progress bar did not advance, I made restart. Now attempt to install the update manualy and the installer says "You cannot install Security Update 2008-006 (Intel) on this volume. This volume does not meet the requirements for this update." And the preferences of applied Software Update don't list the 2008-006.
Please help me. Thanks a lot.
RE:Király
Log in to an admin account and then try going to /Library/Receipts/boms and moving this file to the Desktop:
com.apple.pkg.update.security.2008.006.bom
Then try running Software Update again.
RE: Kijote
No, I don't have luck. The last receipt that I have its com.apple.pkg.update.security.2008.005.bom.
Thank you!Can you download the 10.5.5 combo, and reinstall it?
-
ITunes 9.2 does not show iTunesU files at all (iTunes 9.1 did)
Hi everybody,
After upgrading to iTunes 9.2, iTunes stopped showing iTunes U files I had moved to my 30GB 5th gen iPod (Windows formatted).
When I first move iTunes U files to my iPod, they show up in iTunes under Music, with iTunesU as the genre. This is fine, I know the firmware does not allow an iTunesU category for this iPod, and it is OK. But after using my iPod for a while, iTunes will no longer show these files. They are gone in iTunes 9.2 (this was not the case in previous versions). My iPod still shows these files, and I can play them just fine. But I cannot see them in iTunes, and I cannot delete them. (Can I delete files in my iPod without using a computer?) These files stay as Other under iTunes, and take up space, but they are invisible to iTunes (on Mac or Win).
I have already gone through one cycle of reformatting my iPod using iTunes, I don't want to do it again.
Is anybody else seeing this? Any workarounds, or is this a bug with new iTunes 9.2?I am experiencing a similar problem, as well. I have downloaded some Apple Developer videos that I wanted (available on iTunes U) and converted them (within iTunes) to the standard def iPhone/iPod video format. I would check to make sure that you've
The weird thing is that the files sync'ed over into my library - and I am able to watch the videos just fine on my iPhone 3GS (running iOS 4 with iTunes 9.2 (61)). However, for the life of me I cannot get the iTunes U playlist that I created to sync properly with my iPhone. It copies the playlist name - which is a good sign - but if I go to it on my iPhone it's completely empty.
Here is what I have tried so far:
1) Verified that the iTunes U videos have been converted properly and can play on my iPhone
2) Verified that there are iTunes U videos in my playlist (which I have named "Apple Development Videos"
3) Verified that "Sync iTunes U" has been checked within iTunes - with the option selected to automatically include all items of all collections (although I have tried it by explicitly including individual iTunes U content and explicitly selecting the "Apple Development Videos" playlist as well)
4) Manually syncing iTunes with my iPhone - the "Apple Development Videos" list comes over, the videos in iTunes U are playable on the iPhone, but the playlist is still empty
To make things worse, I figured I would try manually adding the iTunes U videos to the playlist on the iPhone. When I do that, the videos STILL do not appear in the playlist - and when it syncs with iTunes I have a playlist that has duplicate entries.
Sounds like a bug to me; hopefully this will be resolved in the near future -
IPhoto pictures does not show up when trying to change desktop pictures
When I got my new MBP I used a Time Machine back up to restore my system. This has worked great, though so far there is one little issue:
When I right click my desktop and choose "Change background picture" my iPhoto images doesn't show up in the menu like they used to.
Has anyone got any idea about how to get them back in there? Do I somehow have to "let Leopard know" that I have an iPhoto library that I would like to be able to choose from?
Thanks!HI Rune,
That is most likely a shared library issue. The Finder is trying to access your iPhoto library without iPhoto being open. Sometimes when libraries are shared, they can become corrupt.
Go here and read about shared library issues.
http://www.thexlab.com/faqs/sharedlibraryerrors.html#Anchor-Resolving-35326
The easiest way to fix this is to back up your important data and do an Archive and Install which restores your system software. It does NOT erase the drive, you do not have to reinstall any Apple pre-installed software, ie., iLife applications.
Go here and read the instructions for archive and install.
http://support.apple.com/kb/HT1544
Carolyn -
Hard drive "does not meet the requirements" for system updates
Hi,
I'm running 10.2 and I'm trying to update my computer to the more recent version, except that I've gone through the update downloads on this site and anything higher than 10.3 tell me I need to run 10.3 to run it. When I tried to upgrade to 10.3, I was told that I "cannot install this software on this disk. This volume does not meet the requirements for this update". What does that mean and how do I rectify the problem? Thank you very much in advance.
- JenHi Kappy! I have a similar problem: I had a problem in the past and had to re-install the system. I now have a previous sytem folder on my mac which I do not dare touch. I used to have a later version than 10.3.3 (I cannot remember which). I am now trying to update with the 10.3.9 combo update (just bought a new ipod) and I get the famous "does not meet the requirements" message. I have repaired permissions and done Onyx maintenance - still nothing. I wonder whether somehow the installer detects that there is already some newer component installed and does not want to re-install. I am awfully frustrated... Thanks in advance for your help.
-
CRMv1.2 Enter this License key is invalid or does not match the organization name?
Hi All,
Thanks for your support in advance.
This is Ashok. We purchased CRM v1.2 from the third party. They have provided us the CRM CD's(5) with product key. The problem is when im trying to install CRM server in windows 2003 server its asking for organizations name and License Key. So I have entered
my company name as the organization name and entered the product key as a License Key. After click on the add button its giving an error i.e., "Enter this License key is invalid or it does not match the organization name. Verify your license key and organization
name".
Kindly suggest me the best solution to resolve this issue.
Waiting for your valuable suggestions.
Thanks,
Ashok M.Hi Ashok,
We have a specific forum for discussing CRM:
https://social.microsoft.com/Forums/en-US/home?forum=crm
However from the description it is a license related question. In this situation it is more recommended to contact the support directly:
Here is the support page for Microsoft Dynamics:
http://www.microsoft.com/dynamics/en/asia/contact-support.aspx
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
How do I add SRV record to my DNS for Office 365?
How do I add the following record? Add the SIP SRV record for Lync web conferencing. Create a new SRV record. In the new record, make sure that the fields are set to precisely the following values: Record Type: SRV Service: _sip Protocol: _tls Port:
-
HT2506 Preview always opens with full screen. Can I change this preference?
Is there an option to have Preview NOT open each image in full screen mode?
-
Windows 2008r2 cluster dns issue
We are running GW 8.0.2 not hot patches. System is running on a windows 2008r2 2 node cluster. When we failover the gwia from node 1 to node 2 we can no longer send email to the internet. We receive just fine, also imap and pop connections are workin
-
제품 : ORACLE SERVER 작성날짜 : 1995-11-06 EXPORT 실행 시 ORA-1403 에러가 발생되는 경우가 있는데, 이 에러는 테이블 혹은 index에 문제가 있는 경우 발생할 수 있다. 여기서는 ROWID를 사용하여 table을 복구시키는 방법을 소개한다. 1. 기존 테이블과 같은 구조를 갖는 테이블을 만든다. SQL> CREATE TABLE TEMP AS SELECT * FROM EMP WHERE 1=2; 2. 기존 테이
-
Hi - we have 'lost' photos in the iphoto library
Hi - we have 'lost' photos in the iphoto library & relevant albums & slideshows frm 2009-2012; they are shown as empty. Older photos (pre 2009) were backed up & are all there in the library, album and slideshows although jumbled up in the library - t