I have an iMac running Lion which seems to freeze every 5 minutes. Any suggestions? regardless of what I have open.

My Imac freezes constantly. I've run disk utility which says my disk is fine. I'm running the latest version of OSX.
Any suggestions?

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

  • I have 2T imac running lion Can I re-partition and use one half as a back up disk?

    Bought a new mac in November and it is refused to start up yesterday. Spoke with Apple  and they said I should make sure I do regular back ups in case I l ose my hard drive?!?! I did a clean install of the Operating software but was advised to erase and install.
    I have taken all my important stuff off and can reinstall my programs once I get to the next stage so what I am wondering is
    I have 2T imac running lion Can I re-partition and use one half as a back up disk for use with time machine so that I do not have to buy an external HD?
    Cheers J

    You could partition the drive, I read that Time Machine will work on if you HD partition.
    BUT, it will do you no good if you HD fails.
    Usually, if a HD fails it's the entire drive that is dead not just a partition.
    So your time machine back would be on a dead disk, useless!

  • I have an iMac running OS 10.4.11. How can I check to see if I have the Flashback Trojan (and remove it, if I have it)? IMy Safari is also crashing frequently. Any suggestions?

    I have an iMac running OS 10.4.11. How can I check to see if I have the Flashback Trojan (and remove it, if I have it)? IMy Safari is also crashing frequently. Any suggestions?

    Hi Barry, is this an Intel iMac, or a PPC iMac?
    Disable Java in your Browser settings, not JavaScript.
    http://support.apple.com/kb/HT5241?viewlocale=en_US
    http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
    http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets
    Flashback - Detect and remove the uprising Mac OS X Trojan...
    http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
    In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
    /Library/Little Snitch
    /Developer/Applications/Xcode.app/Contents/MacOS/Xcode
    /Applications/VirusBarrier X6.app
    /Applications/iAntiVirus/iAntiVirus.app
    /Applications/avast!.app
    /Applications/ClamXav.app
    /Applications/HTTPScoop.app
    /Applications/Packet Peeper.app
    If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
    http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
    http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
    The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.
    https://www.securelist.com/en/blog/208193454/Flashfake_Removal_Tool_and_online_c hecking_site
    More bad news...
    https://www.securelist.com/en/blog/208193467/SabPub_Mac_OS_X_Backdoor_Java_Explo its_Targeted_Attacks_and_Possible_APT_link
    Removal for 10.5...
    http://support.apple.com/kb/DL1534

  • I have an iMac running Lion and W7 with boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts but that's it..

    I have a 5 month old  iMac running Lion and W7 with the latest version of boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts, there's a small amount of drive activity and that's it. 

    Hi Jane, your info may still be there, look in the Users folder at root of the drive, how many users are there there?
    It sounds like this may have happened...
    Return to default desktop, apparent "loss" of home directory, (it can happen spontaneously too)...
    http://docs.info.apple.com/article.html?artnum=107854

  • Good morning, have an iMac and interested in buying external cd/dvd player, any suggestions?

    any sugestions on external cd/dvd players?

    an alternative to the apple superdrive works seamlessly with imac and around half the price;
    http://www.amazon.co.uk/Proxima-Direct®-External-compatible-MacBook/dp/B008NVWCI G/ref=sr_1_4?s=electronics&ie=UTF8&qid=1395237868&sr=1-4&keywords=dvd+drive+mac

  • I've recently had to have my hard drive replaced which means my itunes has been lost can i transfere whats i have on my itouch back onto my new itunes??

      can anyone help??

    Transfer iTunes purchases by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer other music by using a third-party program like one of those discussed here:
    Copy music from Ipod to new computer...: Apple Support Communities
    - Make a backup of the iPod by connecting to the computer and right clicking on the iPod under Devices in iTunes and selecting Backup
    - Restore the iPod from backup.

  • I have an iMac 21.5" which is currently running 10.7. It takes between 5-10minutes to boot into system and i have noticed a continuous error log on console: 12/3/2014 5:17:49.000 PM kernel: USBF:     1586.748     AppleUSBHubPort[0xffffff800e51b600]::Fatal

    I have an iMac 21.5" which is currently running 10.7. It takes between 5-10minutes to boot into system and i have these console error messages  listed below:
    12/3/2014 5:17:49.000 PM kernel: USBF:          1586.748          AppleUSBHubPort[0xffffff800e51b600]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (2)
    12/3/2014 5:17:49.000 PM kernel: USBF:          1587. 26          AppleUSBHubPort[0xffffff800f55a800]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    12/3/2014 5:17:49.000 PM kernel: USBF:          1587. 27          AppleUSBHubPort[0xffffff800f575200]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    12/3/2014 5:17:53.000 PM kernel: USBF:          1590.840          AppleUSBHubPort[0xffffff800e51b600]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (4)
    12/3/2014 5:17:53.000 PM kernel: USBF:          1590.840          AppleUSBHubPort[0xffffff800e51b600]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (2)
    12/3/2014 5:17:54.000 PM kernel: USBF:          1591.122          AppleUSBHubPort[0xffffff800f55a800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Any help as i notice it has something to do with the usb but i cant tell which device. also it has been behaving the same in Mountain Lion as well. Any help will be greatly appreciated.

    If you don't have a hub attached, then I suggest a visit to an Apple repair station. I don't have one and don't see any of those kinds of messages in any Console log.

  • I have an iMac 5.1 which is running OSx10.5.8 - it runs very slowly and I can't find if there is a particular problem. In the process, I have tried to install 10.6 [I have a new iMac] and the 5.1 won't accept the install discs.

    I have an iMac 5.1 which is running OSx10.5.8 - it runs very slowly and I can't find if there is a particular problem. In the process, I have tried to install 10.6 [I have a new iMac] and the 5.1 won't accept the install discs.

    As you have discovered... you cannot use the install discs from another Mac...
    Re the iMac running OS X 10 5 8... and for your New Mac...
    See Here for keeping your Mac Happy...
    http://support.apple.com/kb/HT1147
    http://www.thexlab.com/faqs/maintainingmacosx.html
    http://www.thexlab.com/faqs/performance.html

  • I have three Imacs running Final Cut X but only able to update to 10.0.7 on one of them. Everytime I try to update it ask for my apple ID which I submit...then get the same replay to enter my Apple Id have only been able to update one of them to latest

    I have three Imacs running Final Cut X but only able to update to 10.0.7 on one of them. Everytime I try to update it ask for my apple ID which I submit...then I get the same message to enter my Apple ID...Any suggestions?

    Easiest thing to do is put the app on the non updated computers in the trash and then copy the new app on to a flash drive and copy into the app folders on the other two computters.

  • I have an iMac running version OS 10.6.8.  I bought the desktop in               2009.  Short of buying a new iMac, how can I upgrade to Lion?

    I have an iMac running OS 10.6.8.  I bought the iMac in 2009.  Short of buying a new iMac, is there any other way to upgrade to Lion?  Thanks.

    I don't believe anything prevents you from upgrading to Lion or Mountain Lion. See:
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • HT6114 I have an iMac running OS X 10.5.8, and in order to run newer applications I apparently need to upgrade my OS.  Since this OS is fairly old, what steps must I follow to get my computer up to date?  I seem to recall hearing that it may take several

    I have an iMac running OS X 10.5.8, and in order to run newer applications I apparently need to upgrade my OS.  Since this OS is fairly old, what steps must I follow to get my computer up to date?  I seem to recall hearing that it may take several steps and may require new versions of iWorks and iLife (at least)

    The relevant information is:
    Model Name:          iMac
      Model Identifier:          iMac9,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.93 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          IM91.008D.B08
    Chipset Model:          NVIDIA GeForce GT 120
      Type:          Display
      Bus:          PCIe
      PCIe Lane Width:          x16
      VRAM (Total):          256 MB
      Vendor:          NVIDIA (0x10de)
      Device ID:          0x0655
      Revision ID:          0x00a1
      ROM Revision:          3370
      Displays:
    iMac:
      Resolution:          1920 x 1200
      Depth:          32-Bit Color
      Core Image:          Hardware Accelerated
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Quartz Extreme:          Supported
      Built-In:          Yes
    Display Connector:
      Status:          No Display Connected

  • I have an iMac running OS 10.5.8 I want to upgrade to Lion to use iCloud. Is this possible?

    I have an iMac running OS 10.5.8 I want to upgrade to Lion to use iCloud. Is this possible?

    You must upgrade to Snow Leopard, then Lion. There is no direct upgrade from Leopard to Lion.

  • I have a imac running snow leopard 10.6.8 and have adobe cs5. Is it safe to update to mountain lion 10.8.2 and keep adobe CS5 running properly?

    I have a imac running snow leopard 10.6.8 and have adobe cs5. Is it safe to update to mountain lion 10.8.2 and keep adobe CS5 running properly?

    You should not. But it never hurts to have a backup because bad things can happen.

  • HT4809 I have an iMac running OS X v10.5.8.  The processor is a 2GHz Intel Core 2 duo.  Can I safely upgrade to Lion OS?

    I'd like to upgrade my operating system on my iMac.  Like I said, I have an iMac running OS X v10.5.8.  The processor is a 2GHz Intel Core 2 duo.  Can I safely upgrade to Lion OS?

    You will need SL (10.6.8) to download and install from the App Store. You can buy a thumb drive with Lion and by-pass the SL install, but you are not saving any money by doing it that way.
    Mountain Lion comes out next month. Just in case you want to wait. And be aware that neither Lion or Mountain Lion will run PPC applications.
    Your computer may pass, but check here for full requirements.
    http://support.apple.com/kb/SP629

  • I have a imac aug 2007 and seem cannot download mountain lion

    I have an imac aug 2007 and seems I cannot download mountain lion from the apps store..any body can help..thanks

    Does your Mac meet the requirements as outlined below?
    http://support.apple.com/kb/HT5444

Maybe you are looking for

  • Need help in getting a report from SAP!

    Hi, I'm in charge of a manufacturing operation. I need your help to find a report of OPEN PLANNED ORDERS. I'm using spreadsheets to control the production but I need to get this information from SAP directly. NO MORE EXCEL!!! Can somebody help? JB

  • Prob. exec. print job from RFC which im calling Web Dynpro java in Portal

    Hi, Ive got a problem executing a print job from an RFC which im calling in Java web Dynpro Application in Portal. Im using an Acess Method G: for Front End Printing but Order gets stuck with the Status "Waiting" "Front end unavailable". Any help wou

  • Differences between the "Adobe Acrobat Versions 7 and 9"

    Dear Adobe Support Team, I need to know the differences between the "Adobe Acrobat Versions 7 and 9". I have worked with Acrobat 7 and have used the same script after installing Acrobat 9 for Automation Testing with QTP for validating pdf. The object

  • Assigning the base class

    I have a bunch of DefaultMutableTreeNodes already created and I want to convert them all to myTreeNode objects which extends DefaultMutableTreeNode. Is there an easy way for assigning the super class of myClass which is DefaultMutableTreeNode. I know

  • Message VL864 Error during copy partner: SP

    Hi When I try to create a delivery note for project in transaction CNS0, I receive the below error VL864 Error during copy of partner: Patner role SP.. The ship to party is connected to a SP both in the project and in the customer master data. Thank