I have an  Ipad 2 and  the touch screen is cracked, where can i change the screen

Where can I changes the touch screen for mi Ipad 2

What does this mean?
Ipad don't buy parts for replace,
Apple does not replace parts. Again, they replace the iPad. Replacing parts yourself voids the warranty. Not sure when you bought it.

Similar Messages

  • HT5188 I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad.  One code in the spreadsheet says it's already been used but shows no serial number or device name.

    I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad using Apple Configurator.  One code in the spreadsheet says it's already been used but shows no serial number or device name.

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • My mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

    my mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

    Once something similar happened to me. The external drives I had set up for FCP to use for some reason were not mounted, and FCP put all its render files on the main drive and I couldn't find them anywhere.
    Go to applications, and control-click (and hold down) on your FCP icon; you should get a pop up menu that says "show package contents". Select that, select the "contents" folder, then the "mac OS" folder. See if your quicktime file is in there, or if you've got render files in the "render" folder or audio render files in the "audio render" folder that don't belong there.
    That's where FCP sticks stuff when your documents FCP project folders are not available or when external drives you've selected aren't available.

  • I have just purchased the latest macbook pro 13 retina (late 2013). I want to connect to a Dell U2713H Monitor. As the  new macbook doesn't have a cd slot, I am unable to install the monitor drivers etc. Where can I download the drivers?

    I have just purchased the latest macbook pro 13 retina (late 2013). I want to connect to a Dell U2713H Monitor. As the  new macbook doesn't have a cd slot, I am unable to install the monitor drivers etc. Where can I download the drivers?

    Thanks for your prompt reply. I'm not sure how to connect to the monitor as the only ports available on this model mac are Thunderbolt. The mini display to display cable supplied doesn't seem to work out of the TB port. Do I need to use a Thunderbolt cable + an adaptor?

  • Will you still have stock for the refurbished Ipod nano? Where can i get the refurbished ipod nano?

    Will you still have stock for the refurbished Ipod nano? Where can i get the refurbished ipod nano?

    They haven't shown up in the refurbished section for a bit so they may be sold out. You probably will need to use eBay, Amazon, etc

  • Where can I change the font settings for the name of the month in iPhoto's calendar project?

    where can I change the font settings for the name of the month in iPhoto's calendar project?  I just ordered two copies of a calendar I designed in iPhoto and was surprised to find that the calendar's months were printing in something like an Arial 10 pt font.  On previous calendars I've printer via iPhoto and Apple, the font was much larger.  I've tried every menu option in iPhoto and the Calendar Project program and can't find where this is modifyable. Which leads me to ask, what the heck happened here in the first place?  I did not consciously change the default.
    I do remember that I got some notice when I first tried to print the calendar about the default font having been changed, but I don't know how this could have happened, and I didn't know what impact that had on the calendar until it was delivered.  I typically print about a dozen annual calendars but won't buy another until I've got a handle on this problem.  For the most part, the rest of the calendar is okay.
    As a P.S. is there anywhere where one can get a power user's manual, or instruction on iPhoto?
    Message was edited by: KPAausFrankfort

    "Maximum" and "12" usually refer to compression (influencing image quality and jpeg file size in bytes); and as Curt wrote, dpi is meaningless for display by and viewing in web browsers.  (It could be a different matter if you are uploading the jpeg files for someone to download from the web to print.)
    What are the sequence of steps that you and your batch processing take from Bridge?
    You can use call Photoshop's Image Processor from Bridge to create the jpeg files  (Tools > Photoshop > Image Processor).  In the Image Processor you can set jpeg compression, pixel dimensions if desired, also convert to sRGB (good idea for web display).  In my experience the image processor leaves unchanged whatever dpi is set in the source file; or, if none there as might be for a pdf, it will set the dpi value in your New Document Preset Print Resolution (from your Photoshop Units & Rulers preferences).

  • Itunes on my iPhone 5 only displays the artist list with the UP NEXT feature.  How can I change the UP NEXT feature on my iPhone 5 to display the next songs that are to be played on my play list?

    Itunes on my iPhone 5 only displays the artist list with the UP NEXT feature.  How can I change the UP NEXT feature on my iPhone 5 to display the next songs that are to be played on my play list?

    Hi Sarah,
    It sounds like the songs have either not yet synced over to the iPhone, or something went wrong when attempting to sync to the iPhone. My recommendation is to uncheck the "Sync Music" checkbox.
    Once you have done that, recheck the "Sync Music" checkbox, and apply the changes once more. This will instruct iTunes to completely remove all music from your iPhone, and then copy the files once more. If you have a large amount of music, this initial sync may take a while.
    If the above does not resolve your issue, see the following articles:
    iOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296
    Thanks,
    Matt M.

  • Where can I change the presets?

    I recorded at 1920x1080 25p my videos do not fit in the sequence window, I guess is because this is set for 1280 x 720. Where can I change the presets for the project? I can't find it anywhere

    Thanks to  both for your answers... I´m working on the trial version of Premiere PRO CC, I´m not sure if I didn´t explain myself or I just didn´t understand your answers. The thing is that my video don´t fit in the secuence viewer, they´re bigger, as I was reading there´s a welcome screen, where you are suppose to write the format you want, but I don´t get that menu, when I open a new project. Does the size always have to be 1280 x 720?

  • Where can I change the style for a subtab?

    Where can I change the style for a subtab? I can�t find the Style Element Property for this. I only want to change the text size (the automatic size is too large form my page)... can someone help me???????.. thanks

    Hi there
    Well, this is a yes and no answer.
    Yes, you could change an icon, But no, RoboHelp won't make it easy. What you will end up doing is massaging the JavaScript code for the WebHelp output. This particular change isn't really for the faint of heart. Oh, and you would likely have to change it each time you generate your WebHelp output.
    I would encourage you (and others) to consider submitting a Wish Form to ask Adobe to put this on their radar for a future version.
    http://www.adobe.com/go/wish
    Cheers... Rick

  • Where can I change the buffer size for LKM File to Oracle (EXTRENAL TABLE)?

    Hi all,
    I'd a problem on the buffer size the "LKM File to Oracle (EXTRENAL TABLE)" as follow:
    2801 : 72000 : java.sql.SQLException: ORA-12801: error signaled in parallel query server P000
    ORA-29913: error in executing ODCIEXTTABLEFETCH callout
    ORA-29400: data cartridge error
    KUP-04020: found record longer than buffer size supported, 524288, in D:\OraHome_1\oracledi\demo\file\PARTIAL_SHPT_FIXED_NHF.dat
    Do you know where can I change the buffer size?
    Remarks: The size of the file is ~2Mb.
    Tao

    Hi,
    The behavior is explained in Bug 4304609 .
    You will encounter ORA-29400 & KUP-04020 errors if the RECORDSIZE clause in the access parameters for the ORACLE_LOADER access driver is larger than 10MB and you are loading records larger than 10MB. Which means their is a another limitation on read size of a record which is termed as granule size. If the default granule size is less then RECORDSIZE it limits the size of the read buffer to granule size.
    Use the pxxtgranule_size parameter to change the size of the granule to a number larger than the size specified for the read buffer.You can use below query to determine the current size of the granule.
    SELECT KSPFTCTXPN PARAMETER_NUMBER,
    KSPPINM PARAMETER_NAME,
    KSPPITY PARAMETER_TYPE,
    KSPFTCTXVL PARAMETER_VALUE,
    KSPFTCTXDF IS_DEFAULT,
    KSPPIFLG MODIFICATION_FLAG,
    KSPFTCTXVF VALUE_FLAG
    FROM X$KSPPI X, X$KSPPCV2 Y
    WHERE (X.INDX+1) = KSPFTCTXPN AND
    KSPPINM LIKE '%_px_xtgranule_size%';
    There is no 'ideal' or recommended value for pxxtgranule_size parameter, it is safe to increase it to work around this particular problem. You can set this parameter using ALTER SESSION/SYSTEM command.
    SQL> alter system set "_px_xtgranule_size"=10000;
    Thanks,
    Sutirtha

  • Where can we change the Search term in the Sales ordder?

    Hi,
    Where can we change the Search term , Address group key , in the Sales order partner function
    Br
    Ranjan

    Thanks Henrique for your response...
    Here i wanted to know how to change any of the partner function's search term locally for a particular sales document (as search term is part of general data - address portion)
    As you have suggested, that i have to make the changes in the customer master. But i want to change search term locally for a particular sales document
    Hope my requirement is clear now
    Br
    Ranjan

  • When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!

    When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!

    Tools > Options > Tabs - is the last preference there check-marked??

  • Where can I change the default setting of H tags in dreamweaver cc?

    Where can I change the default settings for the html Heading tags in Dreamweaver?

    The customary approach is to style them yourself in your CSS.  Or use one of the various CSS resets.
    h1, h2, h3, h4, h5 {
         margin:0;
         padding:0;
    h1 {font-size: 175%}
    h2 {font-size: 150%}
    h3 {font-size: 125%}
    h3, h4, h5 {font-size: 110%}
    Nancy O.

  • How/where can you change the delimiters within the output file -Urgent Pls!

    Hello Experts,
    When Exporting data through EAS, how/where can you change the delimiters within the output file (ie. space delimited vs tab delimited vs custom)
    Thanks in advance.
    Regards,
    Sonu

    This is where I will be shot down in flames but at least in 7.x I am unaware of any configuration option that allows you to export in anything other than space delimited.
    I guess you could write a shell/perl script that could change this outside of Essbase
    Edited by: DrFosterMan on Jan 16, 2009 12:54 PM

  • My wife and I each have an Ipad and only one mail account. Both of us receive the same e-mails but when one of us deleates an e-mail it also deleates on the other Ipad. How can I stop this? I might delete an e-mail she wants to read. Thanks

    My wife and I each have an Ipad and use only one mail account. Both Ipads therefore get the same mail and when either one of us deleates an email it also deleates on the other Ipad and this can be a problem if one of us doesn't want that e-mail deleted. Obviously our Ipads are synced and I don't know how to correct this. Any advice ?

    If you both have the same email account, there's no setting on iPad you can use.  When a message is deleted, it's deleted from the mail account server, which will happen on both devices. 

Maybe you are looking for