I have an IPhone 4S and am using the Phonak Icom with my hearing aids. All works well except for when I get an incoming call I can't hear the ringing/ringtone in my aids. Any solution?
I have an IPhone 4S and am using the Phonak Icom with my hearing aids. All works well except for when I get an incoming call I can't hear the ringing/ringtone in my aids. Any solution?
Did you get any answers?
Similar Messages
-
I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks.
Did you already make sure that Apple Mobile Device Service is installed and active on your computer?
http://support.apple.com/kb/TS1567
More troubleshooting about your device not recognized in Windows can be found here: http://support.apple.com/kb/TS1495 -
Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3
Could it be because the SIM card got damaged while I cut it to fit the IPhone?
Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
Or somehow the Chinese carrier found out and locked it?
No, which is not possible.
What can I do? Get a new SIM and see if it works again?
Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget. -
I have a iPhone 4 and I use a hotmail email account. Recently it's not been notifying me of me of emails. I've checked notification settings all set to get them but when you look at overview of notifications the email ones not shown like other apps do? Can anyone help its driving me mad?
I had the same issue. I just went to the Apple Store today to talk to someone about it. They had me delete the account and then add it back in. It's been working fine ever since!
-
hi i have an iphone 5 and i use iMessage to reach my contacts, 2 weeks ago i switched my plan so now i have no internet in my plan. Since i changed my plan i don't receive the messages other iphone users send me. what do i need to do to get all messages?
iMessage requires data. You need to have an active internet connnection, either wi-fi or cellular. If you are not connected via wi-fi, then you would need a cellular data connection. If you do not have that, then you will not receive the iMessages. Either get the cellular data back, or remain connected to wi-fi, or you will have to disable iMessage and ensure that you have an SMS texting plan with your carrier.
-
I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me. -
I have an iPhone 4S and while upgrading to OS 8.3, I noticed that all my contacts are gone. Can I connect to my iMac OS Yosemite 10.10.3 and transfer contacts directly onto my phone?
Hey there denise.ca,
I see that you have a question about one of the functions of USB syncing. To answer your question, yes, you can sync contacts from your computer to your iPhone using USB syncing and iTunes:
Info: Sync your contacts and calendars.
Sync your iPhone, iPad, and iPod with iTunes using USB - Apple Support
https://support.apple.com/en-us/HT201253
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I've just hooked my 20" iMac display up to my Toshiba 37" HDTV using a mini dvi-HDMI adapter, and everything works well, EXCEPT for the green tinge (or hue) that is showing up. Everything else looks pretty good though..... The color that is on my iMac is still good, Its just green on the TV.
Anyone have suggestions or ideas?Try opening the Display System Preferences, then click on the Color options in the Display preferences window that appeared on the Toshiba display. Click on the Calibrate button and follow the instructions for creating a custom ColorSync profile that will hopefully solve the green tinge issue. The Apple Display Calibrator Assistant software that launches when you click on the calibrate button will walk you through the process.Assuming that the green tinge is minor and that you don't have a more serious cable or hardware issue, I am hopeful the results will be worth it.
-
hello im fation mashi im from albania i have a iphone 3 and i want to update it with ios 4.3.3 but i have fear because maybe can block the apple if i update it can you please help me ?
Since an iPhone 3G cannot be updated past iOS 4.2.1...the end of the line for that model iPhone...you can't do what you want, so there's nothing to be fearful of.
-
Hello, I have an iphone 4 and it has recently come up with the connect to itunes logo. When I connect it to my computer, itunes comes up with there is a problem with your iphone. What should i do? I need help ASAP
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
my dad gave me his mac. we deleted and reinstalled mac os and everything works great except for when i go to update garageband it says that it is still assigned to my dads itunes id even though he is no longer using a mac. what do i do?
thank u 4 yr help , i have managed to do it after all. i downloaded the iphone 3gs ios 4.2 manual and it explained everything i had to do on there ... all i had to do was put my sim into phone ,then connect usb lead and then open my i tunes , i clicked on my iphone and went into summery and straight away it synchronized my phone and yay up popped my sim card and ready to use ('',) many thanks though 4 yr help wendy
-
I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring. One phone is for work and one is for private and I don't need both phones to ring from one call. It's bizarre.......is this supposed to be like this? If so where can I turn it off?? And while we are at it iOS8 has installed iBooks on both of my phones and iTunes won't let me uninstall it. I don't need or want iBooks on my phones.
Hi,
There are two easy fixes to this.
One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
Two, go to Settings and turn-off "Handoff". This can be found under the General page.
Hope this helps! -
How do I sync my iPhone 5 and iPad using iTunes with my new Windows 8 computer? Windows support community implies it's an Apple problem.
chateaudrive wrote:
roaminggnome,
Windows Support says you cannot sync Calendar function for iPhones with Windows 8
You did not mention this in your 1st post.
Did you try the troubleshooting steps on the page you came from? -
I Have an iPhone 4S and did not have enough memory to download the new OS a few months back. I woke up this morning and all my contacts have disappeared. How do I fix it??
First reset
Hold sleep home buttons UNTIL Apple logo appears
then if required
recover from iCloud backup or by syncing with iTunes
iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad -
My friend has two ipods. Two Apple ID's and on one ipod he has a free text app on it and only Message on the other. He cannot receive a message from my iphone 4S on the one with Message, but receives it fine on the one with the free text app.
He can also receive a message from my iPad on the one with Message.
My question is how can he recieve a text from my iPhone to the ipod which has a different Apple ID than the other but does not have a free text app?
Also on the ipod he has the free text app he has not upgraded to ios7 and won't.Are the use the correct email address for the contact? Those are listed in Settings>Messages>Send and Receive. When Messaging somene the iOS devices used the email address (or phone number if applicable) listed in the Contact app for that person.
Thus, it appears the you Contact apps only has that one email address listed for the person you are trying to Message.
If he can send you a Messages can you reply to it? If so save the sender to your Contact app.
Maybe you are looking for
-
Getting a useful list of tables
Can anyone recommend a query to get a useful list of tables for the end user? Our application allows users to browse the database and look at data in tables. Currently, we first have the user choose a schema, and then a table,view or synonym within t
-
Cannot Drop table with lower case name
Hi, One of my developer created a table through application in oracle 10g R2, when I list tables select * from tab; the table name is shown in lower case or Initcap. I cannot drop or manipulate that table. How can I drop that table(s)? Thanks & Regar
-
Material Overhead at Production
Hi friends i want to ask about material overheads that will be issued to production at the process execution ...assume that the machine needs 1 liter gas to produce 100 kgm for FP....how it will be handeled at Process Execution and i want issue spare
-
I want to have same iTunes account on 2 different users name on single macbook pro how do i do this
I would like to set up 2 user accounts on my macbook pro so that my girlfriend and I can both have our own email accounts however, I want to have access to my itunes account and libary from both user profiles is this possible? If so how do I set it
-
Data Acquisition problem with multiple length of commands and data received.
Hello, I need to write a program to communicate with a Data Acquisition board. There are about 10 commads and each has a different number of bytes associated with it. For example command-1 has 4 bytes which need to be send to the DAQ, command 2 has 6