I have an IPhone 5s the screen is magnified usually I turn off then turn on it goes back to regular size its not doing that. Can anyone help?
I have an Iphone 5s. the opening screen is nagnified and I cannot get it back to regular size. I turned the phone off then turned back on it still is magnified. Is there another way to get it back to the right size?
Sorry, i Forgot the article: http://support.apple.com/en-us/HT203332
Similar Messages
-
i suddenly observed my iphone screen turns violet, i tried to turn it off but its not responding so i tried to charge it although i just finished charging it.. but still no reaction so i connect my phone to laptop still the same and gradually violet fade and turning to black.. please can any one help me on this matter....
Sounds like your phone is in recovery mode. In this case, all data on it is gone. There's nothing to back up.
-
I have a iPhone but the screen is cracked so I bought a new one off eBay but the past owner iCloud is still active is there anything I can do
Yes, use it for parts.
-
hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.
Hi vijayanandhtkp,
It sounds like you are getting the Connect to iTunes screen as discussed in this article.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
If so, please check out this article as linked from there.
Use iTunes to restore your iOS device to factory settings - Apple Support
Thank you for using Apple Support Communities.
Nubz -
I WAS UPDATING SPFTWARE ON MY IPHONE BUT ERROR 56 CAME UP WHEN I TRIED TO RESTORE ERROR 3024 CAME UP NOW ON THE SCREEN IS A SYMBOL OF THE CBLE AND ITUNES CAN NOT RESET IT CAN ANYONE HELP??
You'll have to put your iPhone in Recovery Mode.
Recovery mode
If you've never synced your device with iTunes, or haven't set up Find My iPhone, you'll need to put your device in recovery mode. Then you'll restore your device as new or from a backup.
This will erase the device and its passcode.
Disconnect all cables from your device.
Hold down the Sleep/Wake button, then "slide to power off" to turn off your device.
Press and hold the Home button and plug the device into your computer. If your device doesn't turn on automatically, turn it on. Don't release the Home button.
Continue holding the Home button until you see the Connect to iTunes screen.
If iTunes doesn't open automatically, open it. iTunes will alert you that it has detected a device in recovery mode.
Click OK. Then restore the device.
If your device doesn't go into recovery mode, try steps 1–4 again. -
Sometimes when I open my iPhone 5 the screen is magnified about 10x! How do I prevent this?
Or you can follow the article below:
iPhone and iPod touch: Home screen icons are magnified or large -
While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour. -
I was changing my desktop screen saver in system preferences>screen protection. Now it says it is "Loading Images" and won't stop. The Colourful wheel goes around for ever and It does not stop. Can anyone help me?
Welcome to the Apple Support Communities
I have seen a lot of cases like your issue, and it's easy to solve.
First, open Disk Utility, select Macintosh HD in the sidebar and repair permissions. Sometimes, a permission can be damaged and it makes that an application doesn't work properly.
If that doesn't work, open Finder, select Go menu > Go to Folder, type ~/Library/Prefereces, delete "com.apple.desktop.plist" and "com.apple.systempreferences.plist" and restart -
My MacBook Pro randomly froze during a sync to my iPhone and started making a scratching noise by the power button. I shut it off then turned it back on and it won't take me to the desk tops it will just flash a folder with a question mark in it. What do I do?
You have a HDD problem (hopefully you have a backup). Start with the information on this support article:
https://support.apple.com/kb/TS1440
Ciao. -
my i pod 4th keeps going to the turning on screen then in goes blank then flashed white and it keeps doing that can someone help me please
does any one have any idea what i should do it has been jailbroken for 3 months now i downloaded android lock and it started doing thisThat happens sometimnes with jailbreaking.
Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues -
I bought a second hand G4 iBook with iLife 09 on it. I have copied iLife to my new Macbook Pro. The applications would not open, so I did a software update and update all three applications, but they will still not open. Can anyone help?
The seller should have given you the original disk so that you can reinstall as needed. But it likely was a single-user license (which really means single computer) so you can only have a copy on one computer at a time. If the seller didn't give you the disk he is probably still using the software on his new Mac. Your best option to get any of the iWork apps to use in OS X 10.6.6 or later is through the Mac App Store. You can then install them on any Mac you have that has access to the Mac App Store using your Apple ID.
-
On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?
What version of Mac OS X?
What home page?
What browser? -
I have an iPod touch 4th gen that is in iOS 6.1 it's showing another update in the settings for iOS 6.1.6 but even if I wait for more than 30mins it won't show. Can anyone help me. Thank you and Godbless
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- Try when connected to another network
- Update via iTunes on a computer. -
i am trying to download some apps onto my iphone 3gs and it keeps saying i need to update it for this but ive trying and there is no update option on the phone or through itunes, it keeps saying its up to date, can anyone help please?
Would this matter then? can you not update the 3g to the lastest software?
-
I get this error message when trying to upgrade software "The Iphone update software server could not be contacted" Can anyone help?
I'd start with the following document:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Maybe you are looking for
-
Adobe Air gets installed with PSE-9. When I try to uninstall Adobe Air I get a small window with a message saying I need administrator permission, however I am the administrator, and I'm selecting uninstall as the "User" Administrator. This is on a
-
when i go to open youtube at that time my computer says upgread the modern browser .i am using windows xp how can i get moder browser? == URL of affected sites == http://youtube == User Agent == Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trid
-
Unable to add Navigational attribute in Qery
Hi All, Am a beginner in Bex queries. I need to add a Navigational Attribute, in a BEx Query. I did the following: 1. Turned ON the Navigational attribute in the Infocube. 2. As my query is on Multiprovider, i had mapped the specific field as well.
-
Just bought a new MacBook Pro 15" 2.2 GHz i7 16GB DDR3 OS X 10.10 I was using Aperture to keep my photos... And using a WD USB external drive to store the library... Today I tried to open the library with the MBP... Aperture started and processing...
-
I created a number range Object in SNRO Trans, but while saving that object it is showing this error as 'Invalid call sequence for interfaces when recording changes' and further i am not able to proceed.