I have an older PC with three i-tunes libraries on it that go with three different i-tunes accounts. The PC won't boot up and needs to be re-installed. Will I lose the three libraries? Is there a way to reverse sync the libraries from the i-pods after?

It has always been very basic to always maintain a backup copy of your computer files/docs/pics/music/etc.
Just use your backup to put everything back. This is one of the many reason that backup are very basic.

Similar Messages

I have to restore my phone from back up but in order to do it i had to update my software. now that my software is updated there isnt enough room on the phone to back up. is there a way to only restore certain things from the backup like contacts?

i have to restore my phone from back up but in order to do it i had to update my software. now that my software is updated there isnt enough room on the phone to back up. is there a way to only restore certain things from the backup like contacts?

Because it says it's incompatible when it can't be, I got hope. I get error messages all the time with my iPod and iPhone that it cannot sync and that 'this device is not capapble of connecting to iTunes' stuff. I literally forget that happened, plug it in again and it works, I later realize that iTunes made a mistake, they do that.

Is there a way to open a new window from the "Go" menu in Mavericks?

Before Mavericks, I was able to go from the Finder to the top menu "Go" -> "Utilities", or Applications or Home… and a new window would open.
Now I have to manually open a new window to avoid loosing my existing window.
Is there a way to open a new window from the "Go" menu?

Before Mavericks, I was able to go from the Finder to the top menu "Go" -> "Utilities", or Applications or Home… and a new window would open.
Now I have to manually open a new window to avoid loosing my existing window.
Is there a way to open a new window from the "Go" menu?
First, as others have already stated.....make sure the checkbox is deselected for "open folders in tabs instead of windows" in Finder Preferences.
If you're like me and don't like tabs very much, there is a way to make folders always open in windows with a simple click (I'm using Mavericks 10.9.5). Go to a root folder (for example, the Documents Folder), open it, and select View > Hide Toolbar, then all folders within that root folder will open in a new window.
As an alternative method, any folder can be opened in a new window by holding down either Command Key while clicking the folder. But sooner or later you will forget to hold down that key, and then clicking on a folder will open in a tab (which will automatically resize the window and cause much aggravation).
The Hide Toolbar trick will also work with any folder present on the Desktop. It will make all folders inside that folder open in new windows.
To make the Applications Folder open in a new window when opening it from the menu bar at the top of the screen, you will have to open the main hard drive folder and use the Hide Toolbar trick. This will cause all folders inside it to open in new windows.
Hope this helps.

Is there a way to remove a code snippet from the library of my snippets in Edge Animate CC2014?

Is there a way to remove a code snippet from the library of my snippets in Edge Animate CC2014?

When you click on "My Snippets", it will list down all saved user snippets, which you can right-click and click on "delete" to delete it.

Is there any way to REVERSE a 'Restore' action on the iPhone 5?

Is there any way to reverse a restore action on the iPhone5?
I just got my iPhone and connected it to my itunes for the first time and it asked me to register my phone as new or restore from last iphone. I did not realize that this action would delete all of the pictures I took this weekend of my son. Please help! These pics are priceless.

No. You can not "reverse" a restore. If you didn't have the photos backed up, or uploaded to PhotoStream, they're gone.

Is there any way to remove a released transport from the SE10 display?

Is there any way to remove a released transport from the SE10 display or change the owner of a released transport?

Hi Joe
Transport Request once released can not be deleted. We can ignore sending the release request for further systems.
Kind Regards
Eswar

Is there a way I can sync my photos from my iPhone 5s onto my 2007-08 Black Macbook whether it be via iCloud or Photo Stream?

Is there a way I can sync my photos from my iPhone 5s onto my 2007-08 Black Macbook whether it be via iCloud or Photo Stream?

Mac OS X 10.7.3 supports iCloud:
https://discussions.apple.com/docs/DOC-6271
to determine if you are ready for it.
Upgrade instructions are here:
https://discussions.apple.com/docs/DOC-2465
Photo stream needs 10.7.5:
http://support.apple.com/kb/ht4486
Which I have found has trouble filtering spam.

Is there a way to hide my Skype info from the publ...

The reason I wish to do so is because I've been reciving an influx of of people wanting to find people to talk to, and have been sending me friend requests. However, I have no interest of talking to anyone who I have not met, unless it's from either a website I know and use, or have given written permission and my contact details. I do not like random friend requests at all, and I find it suspicious they all identify as female, and I am male. I do not wish to be bothered by such things, and so I ask if there is a way to somehow maybe hide myself from the directory, and if not, maybe such a feature should be added. I know the directory is what you need to search to find anyone, but there should be a more direct way when you have the Skype name. It may make it harder for friends and family to find a person, however, if I really want people added to my Skype, I will give them my info. It was a wonderful feature, however there are those who wish to abuse it, and something must be done, as this problem will not be going away!
So far, I've been blocking the people, but this is the 5th time it's happened in the last 2 weeks, and I'm getting rather concerned that just anyone can find me, and add them in. I use Skype to communicate with my friends and family, not find and talk to complete strangers. I am also concerned that this issue is just the tip of the iceburg, as people younger then 18 can also get a Skype account, and could be extorted by people wishing to harm our youths. I am not trying to be a "white knight", but rather a responsible citizen wanting to help make the community safe for all who are in it. I do not ask for immediate changes, but rather for help as to temporary fixes, and the consideration of features that could help protect people who choose to use them.

If you currently have personal data in Thunderbird, the safest thing to do is to use the ImportExportTools add-on. See the second link if you need more detailed usage instructions than those provided in the description.
* https://addons.mozilla.org/thunderbird/addon/importexporttools/
* http://kb.mozillazine.org/Importing_folders
If you need to transfer other data besides mail, see the following article.
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Thunderbird
If you don't have any personal data in Thunderbird at the moment, then you can simply replace everything in your current profile with data from your old profile:
# Click the '''≡''' menu icon in the top right.
# Open the '''Help''' menu and choose '''Troubleshooting Information'''.
# Click the '''Show Folder''' button. This opens a Windows Explorer window with your current profile.
# Click the '''≡''' menu icon and choose '''Exit'''.
# Create a backup copy of your current profile folder.
# Select all files in your current profile folder ('''Ctrl+A'''), then press the '''Delete''' key to erase them.
# Open a new Windows Explorer window and navigate to your old profile folder.
# Copy all files and subfolders from the old profile folder into the current one.
You're welcome.

Is there a way to download Logic Pro 9 from the app store, as I have already purchased the Logic Studio CDs?

Hello!
I purchased the Logic Studio CD set in a retail store two years ago or so, and I was wondering if there was a way to have the app store recognize this purchase so all I need to do is download Logic Pro 9 from the app store when I get my new iMac (without a disc drive) this month?
Thanks much,
Elliott

Hi
Short answer: No. You cannot convert "DVD" licences to Appstore ones.
I'd suggest that you:
Make Disk Images of the DVD's on your current Mac, and use those for future installs
Make use of the "Remote Install"/DVD drive sharing feature
Buy and External DVD drive
CCT

Is there any way to move loads of mails from the "sent" file to trash, or does it have to be one by one ?

Mail .
I want to delete multiple mails ( not simply a thread of mails , but a larger selection) from the "Sent " file , but it looks like you can only do it one at a time .....is that correct , or am I missing something ?
Message was edited by: alanfromroggwil

I Have had the same problem I have not figured out how to check multiples at once, I know once they are in the trash you can delete them all at once, that's the only thing that drives me crazy about the ipad, I use my surface 2 or laptop to delete a lot of mail at once, at one point my inbox went up to over 10000 emails Before I got my laptop.

Is there a way to copy & paste a clip from the timeline in one project in to another project?

Hello Popular Premiere Pontificaters,
I am using Premiere 6 on a Windows 7 machine.
Is there a way to copy and paste a clip from the timeline in one project in to another project?... I can copy my clip, but when I open the other project, it will not allow me to paste it in there... but I am able to copy and paste a clip within a single project. I tried everything... pasting in to a new video track and pasting in to an existing video track in the second project, but the paste option simply isn't there when I open the second project.
And if Premiere itself will not allow me to do this in any way, will a copy-paste clipboard type of accessory app allow me to do this?... if so, which is the best, trustworthy copy-paste app that is malware free?
Thanks,
digi

Hi Bill Hunt,
I just read the page that you provided about "Handles"... thanks allot for that ARTICLE. In your article and the subsequent article HANDLES, "Transitions Overview: applying transitions" linked from your article, it indicates (in PrE and PrPro anyway - I'm in Premiere 6) that transitions can be applied to non-Video 1 tracks... the paragraph below is a quote from that "Transitions Overview: applying transitions" article...
"Whatever is below the transition in a Timeline panel appears in the transparent portion of the transition (the portion of the effect that would display frames from the adjacent clip in a two-sided transition). If the clip is on Video 1 or has no clips beneath it, the transparent portions display black. If the clip is on a track above another clip, the lower clip is shown through the transition, making it look like a double-sided transition."
So this indicates that transitions can be applied to non-Video 1 tracks since it is referring to content in tracks beneath a transparent fade that would show through... and only non-Video 1 tracks can be transparent and have other clips "beneath" them in the timeline, right?
In the screenshot sample in your article at this LINK, I see the handles (referred to as B and E) and I can see in my monitor window how those handles would be represented by the two little bracket symbols { } ... you can see how they appear in my monitor window in Premiere 6 in this screenshot, and below, from a different thread that isn't related to this topic.
But I'm still trying to figure out how the handles can be applied in the non-Video 1 tracks in the timeline to insert a transition (cross-dissolve) between two clips.
Can you advise me on this?... I posted a separate thread HERE on this topic, but I haven't got any further with finding an answer.
Thanks so much for your article,
digi

TS1398 my password for my wiifi on my ipod touch isnt working for some reason, i tried all my passwords and nothing is working, i never had a problem before please help. is there a way to somehow recover it or change the password.

i have an ipod touch and my password for wiifi isnt working? i never had a problem with this before is there a way u can recover or change it? also my music is stuck in a folder on my computer and will not let me sync or add it back to my ipod. am i going to have to download all my music cds back on it? also purchased some music from iunes and its not showing up on my ipod either.

For music problem:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
For wifi
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Is there a way to call a stored proc from the web in Oracle 10g?

I've found an article about Native Oracle XML DB Web Services in 11g, but it appears to be a new feature. Is there any way of accomplishing something similar in 10g? I would like to be able to process XML documents that contain the name and parameters of the stored proc/function to execute.
Link to 11g article:
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28369/xdb_web_services.htm

I agree with you. I was looking into mod_plsql, but it turns out that their development standards include not using Oracle HTTP server. The whole reason why they want to be able to execute a stored proc based on what is specified in an XML doc is that they want to avoid having to change their middle-tier configurations anytime a new stored proc or a change in stored proc parameters is made. I'm not familiar with what all is involved with .NET and the middle-tier, but supposedly this way, they can specify any stored procedure name and its parameters in an XML file. The XML is then suppose to be passed on to an Oracle stored procedure which will parse the XML and dynamically execute the stored procedure that was specified in the XML.
Here is an example of the XML:
'<Root>
<PackageName>TEST_PKG</PackageName>
<ProcedureName>TEST_PROC</ProcedureName>
    <Parameters>
    <Parameter>
        <Name>EmpID</Name>
        <Value>12345</Value>
    </Parameter>
    <Parameter>
        <Name>Org</Name>
        <Value>ABC</Value>
    </Parameter>
    </Parameters>
</Root>I basically need to parse out the pkg/proc names:
SELECT t.COLUMN_VALUE.extract('//PackageName/text()').getstringval() PkgName,
         t.COLUMN_VALUE.extract('//ProcedureName/text()').getstringval() ProcName
     INTO v_pkg_name, v_proc_name
     FROM TABLE(xmlsequence(XMLTYPE(v_XML_input) .extract('/Root'))) t;...and then execute the procedure:
    EXECUTE IMMEDIATE 'BEGIN '||v_pkg_name||'.'||v_proc_name||'(:a, :b, :c); END;'
      using in v_in_param1, v_in_param2, out v_XML_output;The problem is that this approach is very complicated since there can be any number of IN/OUT parameters and of various datatypes. I would have to create all kinds of possible bind variables!

Is there a way to start a JAVA program from the dock?

Hello,
I wrote some JAVA applications and I would like to put them in -
- and start them from - the dock.
These applications were built into .jar files.
I can start them from Finder which tells me that there is some .jar starter utility.
;JOOP!

The Dock is for Applications, Documents, and Folders (which can take several forms). There are some other odd animals that can stay in the Dock, but they were never truly implemented (recent items is one). If you "wrap" the .jar file inside some package that behaves as an application, you can have it stay in the Dock just as any other Application.
A .jar file is not an application, it's a java archive. It is a collection of classes, metadata, etc. which the Java runtime interprets and executes. The Application which runs it shows up in the Dock as the coffee cup, but that is just the runtime engine, not the .jar.
The .jar is like any other document, such as a a word processing document. Just like any document, it can be double-clicked and the handling application will be called to open it. Double-clicking that word processing document causes the word processing application to open the document and interpret its contents. Double-clicking the .jar file causes the java runtime engine to open the .jar file and interpret its contents. Instead of presenting it as paragraphs of text, it displays it as the application it represents.

Is there a way to recover my stored emails from the version of Thunderbird I had on my Windows XP system that was upgraded to Windows 8?

I can find the folder Windows.old and locate the Thunderbird files in there, but can't find any old email info. Do they exist and if so where to find them?

If you currently have personal data in Thunderbird, the safest thing to do is to use the ImportExportTools add-on. See the second link if you need more detailed usage instructions than those provided in the description.
* https://addons.mozilla.org/thunderbird/addon/importexporttools/
* http://kb.mozillazine.org/Importing_folders
If you need to transfer other data besides mail, see the following article.
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Thunderbird
If you don't have any personal data in Thunderbird at the moment, then you can simply replace everything in your current profile with data from your old profile:
# Click the '''≡''' menu icon in the top right.
# Open the '''Help''' menu and choose '''Troubleshooting Information'''.
# Click the '''Show Folder''' button. This opens a Windows Explorer window with your current profile.
# Click the '''≡''' menu icon and choose '''Exit'''.
# Create a backup copy of your current profile folder.
# Select all files in your current profile folder ('''Ctrl+A'''), then press the '''Delete''' key to erase them.
# Open a new Windows Explorer window and navigate to your old profile folder.
# Copy all files and subfolders from the old profile folder into the current one.
You're welcome.

I have an older PC with three i-tunes libraries on it that go with three different i-tunes accounts. The PC won't boot up and needs to be re-installed. Will I lose the three libraries? Is there a way to reverse sync the libraries from the i-pods after?

Similar Messages

Maybe you are looking for