I have an png file that has images how do i display the seperately?

i have an png file that has images how do i display the seperately?
how do i clip the image to an object and use that object to display on an canvas ?

The MIDP API documentation says this of the paint()
method in Canvas class:
Operations on this graphics object after the paint()
call returns are undefined. Thus, the application must
not cache this Graphics object for later use or use by
another thread. It must only be used within the
scope of this method.
The Drawer.paint() operations are NOT executed after the Canvas.paint() but within !
So as long as Drawer.paint() does not start a separate thread (which is not the case here), it NO problem :)
However, you CAN cache the Graphics object, but then you should have some logics like this
if(cachedGfx != currentGfx) {
cachedGfx = currentGfx;
}Brgds,
Eirik Olimstad

Similar Messages

I have an old ID that has $ but I can't remember the email or password. How do I get the $ transferred to another account?

I have an old ID that has $ but I can't remember the email or password. How do I get the $ transferred to another account?

You can't transfer a balance (nor its purchases) to another account. Do you have any of its purchases on your computer's iTunes library ? If you do then selecting it and doing 'get-info' (control-I) should tell you the account id on the Summary tab on the popup.
You can also see if you can find the id and get the password reset via this page : http://iforgot.apple.com

I have a png file 908px x 2324 px that is being reduced by Muse when placed. Any thoughts?

I have a png file 908px x 2324 px that is being reduced by Muse when placed. Any thoughts?

Yeeee, I did this! I follow the instruction as you wright here https://forums.adobe.com/thread/1362457 and now my image 100% in the size I need.
"After the image has been placed and resized, go to it in the Assets panel and right click and choose "Import Larger Size". By default Muse limits imported images to 2048 pixels in the largest dimension."
I create a composition of images in Photoshop and now I need to paste them into Muse in exacte size like in Photoshop. I save my images in Photoshop by naming them 200% imagename.png and then go to Muse- File - Place. After that I follow resize image and in the Assets panel import Larger size.
Is that the easiest way to past images from psd?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.

You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line

I cannot and never have been, able to open a file that has been previously saved to hard disk by choosing the print to file option in the print dialogue box

'''I cannot and never have been, able to open a file that has been previously saved to hard disk by choosing the print to file option in the print dialogue box. Firefox displays gooblygook even though the file name is an html, Windows Notepad crashes, MS Excel does not recognise the file type. MS Word displays goobblys also when the file has no filename extension.'''

If you use print to file then you get a file that is meant to be send to a printer and that file has all kind of formatting code for that specific printer.
Opening such a file in Firefox or a text editor can only work if you use a text only printer to print the file to, so make sure that such a printer is installed and selected.

I can't get gold of adobe - which is annoying me. I have a file that has been uploaded to my creative cloud that i did not upload or have i ever seen before. SO it seems adobe cannot guarantee security and are uncontactable - i think i may leave

I can't get gold of adobe - which is annoying me. I have a file that has been uploaded to my creative cloud that i did not upload or have i ever seen before. SO it seems adobe cannot guarantee security and are uncontactable - i think i may leave

Since this is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

After publishing an adobe captivate 8 file that has a video I got this message when the video slide starts, I'd appreciate if you have any useful suggestions. Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=

After publishing an adobe captivate 8 file that has a video I got this message when the video slide starts. I'm using Adobe media encoder and it outputs the file as f4v formate and when inserted into the adobe captivate 8 project, I found that I'm still getting the same error message after publishing the project. I'd appreciate if you have any useful suggestions.
Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2036: Load Never Completed. URL: file://C:\Users\User\AppData\Local\Temp\Rar$DIa0.291\haloSkin1_as3_progressive.swf"]
Thanks in advance
Warm Reagrds

After publishing an adobe captivate 8 file that has a video I got this message when the video slide starts. I'm using Adobe media encoder and it outputs the file as f4v formate and when inserted into the adobe captivate 8 project, I found that I'm still getting the same error message after publishing the project. I'd appreciate if you have any useful suggestions.
Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2036: Load Never Completed. URL: file://C:\Users\User\AppData\Local\Temp\Rar$DIa0.291\haloSkin1_as3_progressive.swf"]
Thanks in advance
Warm Reagrds

How to get PDF file that has been transformed into docx into my filing system so I can work on it???

How can I get the PDF file that was transformed into a docx file into my filing system to be able to work on it and translate it as the customer requested?

THanks for your reply.
Well what happens is I bought the program. It gives you a button to click,
you log in and then a box opens up asking you to select the file, I go into
my filing system (in Windows explorer) select the file, and the program
converts it into docx, my choice. I can read it there and when I try to
copy and paste it into my file where the PDF version is saved, it behaves
like an "image", and I can't save it.... or it saves likes something you
save on the internet, so you have to go into internet every time you want
to see it. I have also pressed any amount of buttons to see if it will
give me the option to save it any other way, and have found nothing. What
I would need is a file in docx.format that I can edit. People send me
things in PDF and sometimes I can just copy it off the PDF file and save it
in WOrd, then I can translate it for them. But sometimes the PDF file
doesnt allow me to copy the text. If it is in image form, I cannot work on
it. It means printing it, so I can copy type it into Word... and for that
I certainly wouldnt need to buy a program. Its just double the work and
ends up that the job takes twice as long.!
Sorry if I am a bit dumb with informatics. But I simply could not find
any way whatever to copy the PDF file that was transformed into Word, in a
format that would enable me to edit it.
Kindest regards,
Margery
2013/12/2 Test Screen Name <[email protected]>
Re: How to get PDF file that has been transformed into docx into my
filing system so I can work on it???
created by Test Screen Name<http://forums.adobe.com/people/TestScreenName>in *Adobe
ExportPDF* - View the full discussion<http://forums.adobe.com/message/5890871#5890871

I do not get a readable or editable PDF file that has been converted to Microsoft Word.

In the past I have been able to convert PDF files to MicroSoft Word, and Edit and Save the Documents. Now, the converted files are unreadable and uneditable. How do I correct this problem?

Thanks for the email, Stacy!
I don't have an old PDF file that I converted to MicroSoft Word, however the new file that I am trying to convert and edit is the same kind of file that I've converted and edited before; An Invoice from the same Company. Is there a possibility that a download, MicroSoft Compatibility Pack for the 2007 Office System, onto MicroSoft Windows XP Home Edition Version 2002 computer might be causing the problem? Should I download to (.doc) or (.docx)? Any help will be greatly appreciated!
Thanks,
Joseph Renn Little
Date: Fri, 21 Mar 2014 08:48:32 -0700
From: [email protected]
To: [email protected]
Subject: I do not get a readable or editable PDF file that has been converted to Microsoft Word.
    Re: I do not get a readable or editable PDF file that has been converted to Microsoft Word.
    created by StacySison in Adobe ExportPDF - View the full discussion
Hi Joseph,
I'd like to assist!
Have you tried converting one of your old PDF's that have worked in the past to see if it still works?
Are these files scanned to PDF files?
You may want to try utilizing the OCR solution.
Let me know if that works.
Looking forward to hearing back from you!
Kind regards, Stacy
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6231210#6231210
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6231210#6231210
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6231210#6231210. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe ExportPDF at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I have a jpg file that I must use as a background in a Dreamweaver project. There is some text embed

I have a jpg file that I must use as a background in a Dreamweaver project. There is some text embedded in it that I can't edit. I have tried using Illustrator and Photoshop but I lack experience so I'm probably missing something. I'd be glad of some help as this is all that is preventing me from marking it as complete. The file address is lecaff.fr/images/home_banner.jpg Thank you in anticipation.

Use Photoshop and the Stamp tool (S) to get rid of the lettering.
Do little areas at a time, constantly changing the sampling point if you want a half decent job.
Also, don’t use a .jpg format for files with lettering.
If you must have lettering use .psd, .tif, .png or some other non-lossy format.

How do you import a video file that has extension gp into i movie. also rotating video

How do you import a video file that has the extension gp into ivmovie? Also how do you rotate a video . (the video was taken from a phone.)

Hi, your video file needs to be converted to eg. a .mov or .mp4 file before iMovie will recognise. I use 4Media MP4 converter and it works excellent.
For the rotating I do not have an answer, but if you would manege you would end up with a very narrow image either way.
Good luck

I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should lo

I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should look and B is what happens after I have I opened several tabs. I can get it back to normal if I click on VIEW than click on customize. When the customize window appears FireFox returns to its normal state. I than click on the done box and go back to what I have been doing. I tried resetting FireFox back to default settings, but that did not correct the problem.
This began happening about a month ago. Is there a way I can fix this problem? Thanks for your help.I don't know how to attach my 2 attachments that shows the problem I am having.
[email address removed to protect your privacy and security]
<! [email protected] -->

I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I take a file that has individual letters in it and save each one as a seperate file?

I have a file that has 55 letters to individuals in it and I want to save each page as a seperate file by the name of the person. Can I do this?

The built-in Extract command will do it, but if you want each letter named using a specific name you would need a script.

I have an png file that has images how do i display the seperately?

Similar Messages

Maybe you are looking for