I have Aperture 2.1.4 on iMac OS X 10.4.1. I am getting a pattern across the entire image after clicking on a image in the browser in all projects.
Aperture 2.1.4 iMac OS X 10.4.1
Images look fine in Browser. When I click to enlarge I get a pattern across the entire image. This is true in all projects.
Out of curiosity when I sent the image via email w pattern showing on screen the email is fine-no pattern.
This may be an issue with the pde plugins. PDE stands for print dialog extension and are included with vendor drivers to provide access to printer features not supported by the core printing system. If you are using a Power PC driver (or sharing it from the G4 to the MacTel) then that may be a possible cause. See if HP offers a Universal Binary driver for your model.
Similar Messages
-
I have 60,000 songs on my iMac, probably at least 40,000 of them were iTunes purchases, yet Match is only holding 35,000 total. Shouldn't it hold all iTunes purchase plus 25,000 from other sources?
That would mean you've blown around $30k on iTunes. Are you sure? Are you really going to listen to 60,000 songs that the limit is not enough for you? Is that like the full discography of every artist you know? I already have a couple of hundred cds on iTunes Match and that includes stuff that maybe just maybe I'll listen to someday. Most of it I added for the **** of it.
-
I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any thoughts.
I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?
-
I have an optical mouse that came with my Mac Pro, the only thing plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?
Well
I tried all of the suggestions, sort of. I did not have alcohol wipes, but I did take alcohol and pour some ona white paper towel and then rolled the mouse touch ball aroound and that finally cleared up the problem. Just inverting it on paper did not do the reick, it needed some help with the alcohol. Of course the probelm is the debris that gets inside and it really needs to come out.
This is a huge problem for RIM devices users too. -
I upgraded to v3.6.22 today and have lost the ability to ctrl-click a link to open the link in a new tab; how do I get this back?
Strangely enough, putting my laptop into Hibernate mode solved the problem. It didn't even take a reboot.
Running Windows Vista Enterprise SP2. -
Hi, I have a iphone4, and bought a pair of Harman/kardon bluetooth speakers, the iphone connects with the speakers but after about a munite or 2 the connection stops.
Can you please advise me on the subject
Regards
IzakThis previous discussion discusses the same if not similar problem.
https://discussions.apple.com/message/6750990#6750990 -
how do you purchase a ringtone? i have enabled 'ringtones' in the 'general' section of itunes preferences and i am connected to the internet but i just cant see where in the itunes store to click once i am at the song i want to turn into a ringtone. help!
You don't
You have to create a ringtones. Google will find several ways to do this.
I use Garageband.
How to create custom ringtones in GarageBand 4.1.1
You can also use itunes:
Make free iPhone ringtones in iTunes 10 -
Like I said, I downloaded some Apps onto this Imac. When I try to use them it says that they were purchased on another computer. That said, I don't have another computer. It will then ask for my to sign in with my apple id and password. When I put those in, it says that the computer can not be verified. Contact apple support. I don't have apple care and can't exactly afford to buy it at this time. Anyone know how to resolve this issue??
Ok, I had a glitch, forced to restart, and lost my train of thought.
Reinstalling iTunes should fix the major issue that might have gone wrong, perhaps your explaination points will disappear and everything will be peachy again.
But if they don't, you can open the XML file in iTunes Folder using a Text edit program to see what the common pathname is to the iTunes Music folder or where your content is located.
If you moved the itunes folder, it needs to go back.
I can't download iTunes to my Vista virtual machine to test it out right now because iTunes is down, so I can't verify the pathname, perhaps your issue and the iTunes being down are related somehow?
You don't want to import all your music again, but it's a option, but you lose all your playlists, that's what I'm trying to recover.
If oyu don't have a whole lot of playlists, then simply select all the explaimation point music and delete, select File from the menu and import your itunes folder again. -
I have an Apple Macbook and will be backing up the entire system in order to upgrade to a newer OS. I will be using an external hard drive to do this and there is already data on it. To complete the backup, i will be using the Time Machine application. Does this application wipe out all of the existing data on the external hard drive, or will it create a new "folder" for the backup?
thank youNo, but as steve359 states you should use a dedicated hard drive for backups. It you need a temporary backup then you can use the drive provided it has sufficient space for all your data on the hard drive.
When Time Machine finds that the drive has data on it already it may decide to erase the drive before continuing, which is another reason to use a dedicated drive. -
''locking as a duplicate of this - https://support.mozilla.com/en-US/questions/791340''
I installed the latest version first. When I was done, Firefox was working great. I got off and went back on to my computer later. Firefox was not there, but the shortcut was. I got this error that the item that referred to the shortcut was no longer there. I uninstalled. I tried the beta (4) and the same exact issue occured.ryansaint11,
this isn’t Apple support; this is a user-to-user forum. We’re just fellow users of Apple products here.
If you want to boot from your SSD, then you should put the SSD where your HDD currently is, and put the HDD into the optical bay. (That setup will also get you the best performance.) At the moment, you’re still booting from your HDD. Note that you will need to format your SSD in Disk Utility [with the “Mac OS X Extended (Journaled)” format] so that you can install OS X onto it.
Since you have an Early 2011 model, it might or might not have originally come with grey installation DVDs. You will be able to find out whether it did or not by trying to use OS X Internet Recovery to install OS X onto your SSD. If it does not work, or if the installed OS turns out to be Snow Leopard, then it will have originally come with the DVDs, and you should purchase a replacement pair of DVDs from Apple or iFixit; those discs will have your MacBook Pro’s Apple Hardware Test and its iLife apps. If the installed OS turns out to be Lion, then it will not originally have come with the grey installation DVDs, and your Apple Hardware Test will be installed along with Lion, and your iLife apps will be downloadable from the Mac App Store. -
When I power up my MacBook Pro, I get patterns. Nothing loads. Has my hard drive crashed or do I have a virus. I had been burning a DVD from an iMovie project on an external hard drive when problems began. Thanks for any insights.
Sounds like the video card is going, mine did that after I installed the P.O.S . OS X called Lion.
Was working fine under 10.6, little did I know that Cupertino was compromised at that time, likely the hackers corrupted the firmware updates.
Take it in, they will run their little test and say it's the video card and it's not worth spending $350+ plus whatever else you need to fix it.
Scrap it for parts and buy a new one.
However, you can extract the hard drive and use a SATA to USB adpater cable to the new Mac, transfer files manually or use Migration/Setup Assistant.
http://eshop.macsales.com/installvideos/
you'll need a tool kit too. -
Hello!
I run an AD Forest and when my Internet connection is not working, some of my PCs cannot sign in on the domain, while the majority can do this without any problems.
Could you please help,
Thanks,
RaduHi,
Usually, we have an edge device for internet connection and LAN connection, like a router. So I suppose gateway is not working properly.
For further troubleshooting, please provide your network topology. DNS, gateway settings. Test if you can ping DC when the issue occur. -
It is only dreamweaver CS6 which is not opening. Illustrator and photoshop etc are still working. When I did compatibility test it came up with an issue with windows compatibility mode: windows 7. How to correct this?
contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html
-
After clicking of applications folder in the dock, the items have no labels.
Only happens after a reboot.
System:
Model Name:
MacBook
Model Identifier:
MacBook4,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.4 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
3 MB
Memory:
2 GB
Bus Speed:
800 MHz
Boot ROM Version:
MB41.00C1.B00
SMC Version (system):
1.31f1
Sudden Motion Sensor:
State:
EnabledDouble-click your boot volume's Desktop icon, drag the Applications icon to the Dock, double-click Users, and drag your "username" icon to the Dock. You're finished.
-
I have a new (mid-2011 27" Imac with 2 Thunderbolt Ports each driving one 27" Thunderbolt display.
Graphic card is AMD Radeon HD 6970M with 2Gb of VRAM. All works 100% in Lion but
in Bootcamp 4.0 running windows 7 Professional (64 bit) Only 2 of the 3 screens work not all three.
Tried updates, calling Apple etc. But no luck. Windows doesn't recognize the 3rd screen while
checking on the driver in windows is tells me it's the latest and best available. ? In VMware
Windows 7 also works fine over three screens so windows can do it. But I need it natively to
work. (i.o.w. in Bootcamp). Does Anybody know how to solve this, or if Apple is working on a
solution for this ? It really hurts to have one of these expensive screens staring at you being dead.I have a new (mid-2011 27" Imac with 2 Thunderbolt Ports each driving one 27" Thunderbolt display.
Graphic card is AMD Radeon HD 6970M with 2Gb of VRAM. All works 100% in Lion but
in Bootcamp 4.0 running windows 7 Professional (64 bit) Only 2 of the 3 screens work not all three.
Tried updates, calling Apple etc. But no luck. Windows doesn't recognize the 3rd screen while
checking on the driver in windows is tells me it's the latest and best available. ? In VMware
Windows 7 also works fine over three screens so windows can do it. But I need it natively to
work. (i.o.w. in Bootcamp). Does Anybody know how to solve this, or if Apple is working on a
solution for this ? It really hurts to have one of these expensive screens staring at you being dead.
Maybe you are looking for
-
Apple Tv is playing wrong movie.
Apple tv is playing wrong movie. Very strange. I select the movie or tv program I want to watch but it plays a completely different one. I have airplay on, if I take it off the problem stops but every time I pause then hit play a different movie or e
-
Query regarding App V Deployment - (Deploying DriverMSI in App - V)
Hi All, This is my query regarding deployment of a driver MSI using App V. I have tried sequencing "NMap software" which has Kernel driver as service. I have separated the Kernel driver and wrapped in an MSI and tried deploying the Kernel Driver MSI
-
I have to create 2 new account sort keys KNB1-ZUAWA. One would be for Customer Purchase Order # (VBKD-BSTKD) and another one would be fore the sales order # (VBAK-VBELN). Please give suggestions how to do the same. Thanks
-
My id in alert screate_alert
HI Gems, I've used a RFC look to generate an alert from UDF. RFC Name:SCREATE_ALERT i got mail to inbox but sender name as the one who is sending the message.it is supposed to be PIRWBUSER? any idea? Thanks, Prabhakar
-
What is the max GB size of a hard drive in a Presario S4010CL desk top computer
I have replaced the factory hard drive in my Presario S4010CL, and then that hard drive and others several more times. Each time I have gone to a larger capacity drive. I am again at the point of installing a larger capacity hard drive. I want this t