I have developed one application software using Labview 8.5 in which i am collecting data from 5 temprature controllers on serial line.

I have developed one application software using Labview 8.5 in which i am collecting data from 5 temprature controllers on serial line.
This software is done and successfully installed on customer side.
Now the customer want this software to be run on server and some fixed number of clients should access this with some login security.
Is this fascility available with National Instruments in which i can installed this standalone application in server and allow some clients to access this with
proper login?
Regards,
Vaibhav

Yes, that is possible. Multiple clients can access the VI using Web Publishing tool and control the VI operation. However, only one client has the control of the VI at one instance. The client needs to right click on the web page displaying the front panel of the running VI and ask for control and then release control after the execution to let other clients to ask for the control subsequently. The LabVIEW VI needs to be running upon the server computer since closing LabVIEW also closes the Web Publishing server and disconnects the currently connected clients.
Please check this link http://zone.ni.com/devzone/cda/epd/p/id/3797
You might want to create a stand alone executable for the same and then publish it over the internet for access by your desired clients. In that case, check this link http://digital.ni.com/public.nsf/allkb/3A0087DBE9D31F9286256B19000A2DAE?OpenDocument

Similar Messages

Is it possible to develop struts application without using JPF in workshop 8.1?

Hi,
Is it possible to develop application based on struts framework without using
Java Page Flow in workshop 8.1?
I developed one application without using JPF , but it is showing some Deployment
errors.
rgds,
girish

Girish--
Sure, though, I'd still encourage you to take a look at JPF. :)
If you remove the JPF runtime files from WEB-INF/, WEB-INF/lib, and JPF specific entries in
web.xml, you can start defining a struts-config.xml file against the Struts 1.1 runtime in the
webapp, or you can replace that with a different version as you need. You'll also need to define
the Struts runtime in web.xml including the servlet, taglibraries, etc.
One note, the JPF flow view and other JPF specific editors don't work over a normal
struts-config.xml file.
Hope that helps...
Eddie
Girish wrote:
Hi,
Is it possible to develop application based on struts framework without using
Java Page Flow in workshop 8.1?
I developed one application without using JPF , but it is showing some Deployment
errors.
rgds,
girish

I have deployed one application containing youtube video but it is not working pls help

I have deployed one application containing youtube video but it is not working pls help Application is build using struts2 and is deployed in oracle cloud, login page works fine but the success page is not displayed please help

Hello,
A wild guess, given the lack of details:
I wonder whether it would violate the http://en.wikipedia.org/wiki/Same-origin_policy ?
This is part of the security infrastructure.
"Stealing" content to insert it anywhere else might also violate copyrights?
Technically, does it at least work "on premises" onto WLS 10.3.6?
Regards
Patrick.

Producing test software using labview ...

Hi friends,
For those of you who produce test software using LabVIEW,
TestStand, and C/C++, what are your biggest development problems? (By
the way, this can be hardware or software.)
George

Ravens Fan pretty much sums it up. I suppose you can add onto it being forced to deal in a specific platform due to customer requirements when you know it would be orders of magnitude easier with another platform.
Out of curiousity, what is the purpose of the question?

Hi i want to have get one application for ipad 2

hi ipad 2 , i would like to have a one application for deaf ipad 2 thank you Fama Denney

Try this site
http://appadvice.com/applist_ipad_client_view/apps-for-the-deaf

I have developed one website and provied print fuctionality to print entire web from , but it is not printing the web page correctly, even in print preview it is showing wrong out put

i have developed one website and provied print fuctionality to print entire web from , but it is not printing the web page correctly, even in print preview it is showing wrong out put...

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.
Make sure you provide the URL for the problematic page, so they can see the problem for themselves.

HT1414 I have lost one app last used months ago, Regularly Synced with I tunes. How to find without upsetting everything else ?

I have lost one app last used months ago, Regularly Synced with I tunes. How to find without upsetting everything else ?

Thanks, but I hoped to retrieve Saved information saved in the lost app rather than start afresh with a new download from apple
The app was for aniverseries, birthdays and service reminders etc which I had already entered.
I have Synced and backed up on my MacBook regularly, but other than a complete restore of my system, I do not know how to find and cherry pick individual apps, or even if it is possible to do such a thing.
After all this time I am not even sure of the original name of the lost app.
this sounds a bit fable ! (and the spell check on this is not good either, not very good suggestions !)

Using LabVIEW 6.1 to Collect Data from FieldPoint Modules

I’m just starting off and am stumbling at the first hurdle. How to I collect data from fieldpoint in Lab View 6.1 (yes I no its old)
Thanks

Basically, the process is very simple. You first define the channels you want to measure in either FieldPoint Explorer or MAX. Which tool you use depends on how old the drivers are that you are using. Originally there was a seperate program for configuring FP but they eventually rolled it into MAX. In any case once you have the channels defined (and named) yu simply use the FP VIs to read the channels, refering to them by name.
One warning about the original FieldPoint: It is not an industrial product in any sense of the word. The system is very, very sensitive to heat, shock and vibration.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

I would like to build I data base in teststand which collect data from labview , if you have example (sequence) that give me some way to build sequence

I would like to build a data base in teststand which collect data from labview program , if you have example (sequence) that give me some way to build sequence that have step of action for labview and step
data base

There is an example in the \TestStand\Examples\Database directory. Basically there are two ways to connect to your database.
1. You can use the TestStand database step types. There are steps for opening/closing a database connection, opening/closing an SQL statement, and a step for performing a data operation.
2. The other way is to use the TestStand database logging capability to write your results to the database. This is the way I would recommend. With database logging, you use the step results container to record all your results as the sequence runs. (This is done automatically by TestStand). When the sequence is complete, the process model calls a "Log to Database" sequence that will write the results to the database. You must define your datab
ase schema using Configure->Database Options. There are some default (or example) schema definitions already defined. Refer to chapter 18 of your TestStand manual.
Another way to log the data as the sequence is running is shown in the \TestStand\Examples\OnTheFlyReports. This has the advantage of recording data as it is obtained, but it is not as efficient in terms of using a database connection. I don't recommend using this method.
Please post again if you have any more questions. If you are using stored procedures with your database, I can probably give you some tips.
Mark

Use Java to collect data from HTML

Hi Guys
I am doing a online stock trading project, the main part is to collect raw data from http://finance.yahoo.com User can retrieve the stock detail by inputting the right stock symbol, such as "AOL". I dont have too much problem in this part because yahoo provde a spreedsheet format to display the result. If you type the URL below, it can bring you a set of stock data separating by comma. So, I can use StringTokenizer(date, ",") to collect each data from yahoo into my system.
========================================================================
http://finance.yahoo.com/d/quotes.csv?f=sl1d1t1c1ohgv&e=.csv&s=AOL&
"AOL",15.57,"8/12/2003","4:01pm",+0.04,15.47,15.63,15.40,12097200
========================================================================
However beside this function, I also need to search Stock Symbol, because user may only know the company name. Although Yahoo finance also provide this function, with no spreedsheet format provided. So, if I type the URL below, it will only give me a set of result BUT in HTML format.
========================================================================
http://finance.yahoo.com/l?s=AOL&t=S&m=
========================================================================
So, can anyone tell me what is the best way to collect data from a HTML page? Or anyone know any good stock quoting sites which also provide spreedsheet format?
Thank you very much
Kel

I am doing a online stock trading project, the
the main part is to collect raw data from
http://finance.yahoo.com
Sounds fun.
So, can anyone tell me what is the best way to
to collect data from a HTML page? Or anyone know any
good stock quoting sites which also provide
spreedsheet format?I really don't know any other stock quote sites. But if you want to implement a search function for stock names, I would do it like this
1) Code the HTTP SUBMIT/POST to lookup the possible stock names
2) Use XSL to filter out the HTML path to the table with results, the layout is consistent, so there are no strange exceptions. You can check the DOM structure by using Mozilla's DOM inspector. Just write down the path to the TABLE element and select it, and transform it to CSV for example.
3) Reparse the CSV to fill some boxes
To possibly save some server load use a small fixed size in memory cache to store N requests based on some strategy.
The other part is actual a separate part of what you want to code and should be a separate class in which you can feed the stock name.
If the user types in a bad stock name, you can retrieve a list of possible names using the input as the company name.
Greets.
Maybe there is a SOAP service out there somewhere.

Is it possible using SQLite to collect data from an older SQL database?

Is it possible using SQLite to collect data from an older SQL database? Where can I find a possible answer. Thanks in advance.

There are 3rd-party tools (see comprehensive list at http://www.kenhamady.com/bookmarks.html) that provide extra pdf functionality on top of the pdf export from Crystal.
In the case of my Visual CUT software, you can use hidden formulas inside your Crystal report to generate form fields (pre-populated as well as empty) as part of the pdf export process.
hth,
ido

HT4623 hi i have ipad 2 and i want to connect my external hard disk to transfer data from ipad to directly to external drive?

hi i have ipad 2 and i want to connect my external hard disk to transfer data from ipad to directly to external drive?

Only if you have an app and a wifi hard drive like this
http://www.seagate.com/external-hard-drives/portable-hard-drives/wireless/wirele ss-plus/?cmpid=ppc-_-satellite-_-g-_-us-_-wifi_hard_drive-_-e

I have developed a fillable form using Adobe Acrobat Pro. The form has several fields and some of the information is captured in a bar code. What programs must be used to open the form to properly fill the form out? Adobe Reader, Adobe Xi, Ibook, etc.. I

I have created a fillable form using Adobe Acrobat Pro that contains several data fields with some feeding data to a barcode in the document. I have a "button" set up to save and send the completed form one it is completed. Some of the user are having troubles filling out the form as they are using various programs to do such as iBook, Adobe Reader, etc.... Sometimes the information is not transferred to the barcode and sometimes the "submittal button" doesn't function properly.
Please provide a solution or give me a list of the programs that must be used to properly open and fill out the form.
Greatly appreciated.

Best option is to use Adobe Reader (or Acrobat, of course) on a desktop computer (ie, not on a mobile device). Any other configuration is likely to be problematic.

How can we develope Chat application by using RMI?(urgent)

Hello guys,
I want to develope a chat application like Yahoo Messanger application by using RMI. Can I use TCP/IP of UDP protocal to pass data? Please tell me.
Please give me idea about this topic,Thanks a lot...

Plz send the code for chat application(min b/w 2
users) using RMI to
[email protected],viswanadha.gowrikanth@gmail.
comYou really needed to resurrect an old thread for this request?

Strange behavior when using Labview to collect data from Tektronix tds8200 oscilloscope

I have hit a wall in trying to figure this one out. The problem I am having is that my program does not start the oscilloscope when it should.
I am using a Tektronix TDS8200 oscilloscope. My goal is to collect waveform data from the oscilloscope using Labview. My program first initializes and configures the oscilloscope; this part of the program runs fine.
The second part of the program begins the data aquisition using the 'tktds8k Start or Stop Aquisitions.vi' function, which is equivalent to pressing the Run button on the scope. The 'tktds8k Get Waveform.vi' function is then used and should ideally return the data, which I have connected to a waveform graph for visualization.
When I run my program, the first part executes without issue, but as soon as the program gets to the Get Waveform function, the Run button on the scope, which is green when running, turns off; the program then times out, and no data is collected.
Here's where it gets weird. I went through some debugging to try and figure this out, and I put breakpoints on both the Start and Get Waveform functions so that I could step through the later part of the program. The program continues through the Start function, and the Run button on the scope is green. The breakpoint for the Get Waveform function is reached, and when I press continue, the Run button turns off and then turns back on almost immediately; the data is collected, the waveform graph is displayed, and the program exits without an error.
I thought timing might be the issue, so I made the program wait as long as 5 seconds between the Start and Get Waveform functions, and that did not work. I also tried moving the Start function to before the configuration functions, and removing the Start function altogether; neither method worked.
Are there any thoughts on why the program works when I have the breakpoints enabled and doesn't when the breakpoints are disabled? I am sure that there is an easy fix, but I haven't been able to find a solution.
I have attached a pdf containg information on the Oscilloscope functions (tktds8k.pdf), and I have also attached my program.
Solved!
Go to Solution.
Attachments:
tktds8k.pdf ‏1424 KB
set_up_osc.vi ‏32 KB

Thank you for the swift replies.
After Bill asked about the ID Query, I decided to try a few things that I had already gone over just to double check. I was suspspicious that timing was the source of the error. Using a timed while loop, I set the wait time to 10 seconds and got results. As it turns out, 5 seconds is not long enough, but 8 seconds is a sufficient wait time for the program to work. With the problem solved, I am still mystified as to why waiting 8 seconds is required.
I think that the oscilloscope must be given sufficient time to display the signal on-screen before the Start Aquistion or Get Waveform functions are used. With this logic in mind, the breakpoints were acting as a sort of wait, allowing the signal to be displayed before continuing through the program.
In response to Jeff, I am indeed using an external direct trigger. The hardware is sound, but apparently, my coding could use some work.
I have attached the modified code. I am certain that there is a more elegant solution to the timing than simply slapping a timed while loop on the code. Any suggestions?

I have developed one application software using Labview 8.5 in which i am collecting data from 5 temprature controllers on serial line.

Similar Messages

Maybe you are looking for