I have downloaded and 'installed' Mavericks, restarted but it's still 10.8.5 and the Mavericks Install is still in my Applications folder. I've done this three times, still no result. Help!?!

Can anyone help with this? I've searched the help databases and can't seem to find an answer to this anywhere.

Do you have the 5.3 GB Mac OS X Mavericks installer application? Please do the following:
Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Now try installing Mavericks, but before you do I recommend you put a copy of the installer in your Downloads folder and make a backup of your current system.

Similar Messages

I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
1. Make sure that the right volume is selected in the Startup Disk preference pane.
2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
3. Reset the System Management Controller.
4. Reset the PRAM.
5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash.

I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three time and I keep getting the same error message.

On my PC, I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three times and I keep getting the same error message. I have had itunes for years, but up until 2 months ago the quick time will not initialize to run it.

Try using the Windows Installer Cleanup Utility and delete the iTunes installer. Then try installing iTunes again
http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

Capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?

In Pages capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?

I think it does work as described, but the description is not very complete. Capitalization does not change any of the characters that you type; what it does is allow some of the lower case characters to display as capitals. If you copy the result and paste it as plain text, you'll see that the lower case characters are still there. It doesn't actually say anywhere that it can make capitals display as lower case, and it can't.
The obvious way around this is to actually type what you want.
The more powerful way is to install WordService from Devon Technologies which adds the functionality of Pages' capitalization menu as well a lot of other ones. WordService actually changes the character to the one displayed, and it works in most of the applications on your Mac.

I have downloaded a copy of Quicken but my Yosemite 10.10 does not recognize the developer. I bought the program from Staples. Can anyone help? Thanks.

I have downloaded a copy of Quicken from the Staples store and my Mac tells me that it cannot ID the developer of a product that does not come from the Apple

That's just Gatekeeper telling you the program isn't codesigned.
You can override it by ctrl-clicking on the installer and selecting Open from the contextual menu. It will warn you just like it did before, but it will allow you to click the Open button to go ahead and install it.

Why do you keep asking me to load the newest version? I have done this five times with no results...I loved my old firefox!!!

I cant seem to upgrade and its screwing up all my other applications...

Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.25) Gecko/20111212 Firefox/3.6.25 ( .NET CLR 3.5.30729) '''FBSMTWB'''
Your Firefox useragent is stuck at Firefox 3.6.25 due to Fast Browser Search having been installed when you had Firefox 3.6.25.
See https://support.mozilla.org/en-US/kb/websites-say-firefox-outdated-or-incompatible

Installed mavericks - restarted, but didn't finish iphoto update - force quit - restart gray screen stall, powers off - safe mode says disk full - recovery mode says mac and recovery HDs locked - verify disk says recovery ok - repair says no live support?

Installed Mavericks - restarted, but didn't finish iphoto update - force quit - restart gray screen stall, powers off - safe mode says disk full -recovery mode says mac and receovery HDs locked - verify disk says - recovery ok - repair says no live support?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Just got a new iPod Nano 7gen. Have downloaded and installed iTunes 10.7 and installed succesfully. But iTunes fails when I try to start the program. Have OS X 10.8.2. Moutain Lion. Please help - thanks. Sven

Just got a new iPod Nano 7gen. Have downloaded and installed iTunes 10.7 and installed succesfully. But iTunes fails when I try to start the program. Have OS X 10.8.2. Moutain Lion. Please help - thanks.
Sven

Problem solved. Copied latest file of iTunes Library.itl from Previous iTunes Libraries and replaced it with the original in Music - iTunes-folder.

I have downloaded some software,later restart my computer,but cannot log in,what it is cause?

i have downloaded some software,later restart my computer,but cannot log in,what it is cause

Hello Bruarong,
It sounds like you are unable to print to your printer from Mac OS X Lion. I recommend the troublehsooting from the article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Take care,
Sterling

Hi, my friend have been sending me songs via whatassps and i have downloaded in my iphone 6 but i couldnt find all those download songs. please help

Hi, my friend have been sending me songs via Whatassps and i have downloaded in my iPhone 6 but i couldn't find all those download songs. Please help. Thanks.

music can only be installed and listened to either via iTunes on your computer or by downloading from the iTunes Store, so stop wasting your time with other methods.

I cant open Photos om my mac. Just upgraded to Yosemite. The message I get is: An unexpected error has occurred. Please quit and restart the application. I have done this several times but nothing seems to work. iPhoto is gone. What do I do?

I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?

I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?

I have downloaded music on my iPhone but when I go onto iTunes to update my iPod its not in my library and won't let me redownload. Any suggestions?

I have downloaded music on my iPhone but when I go onto iTunes to update my iPod its not in my library and won't let me redownload. Any suggestions?

Skippy2121 wrote:
I have downloaded music on my iPhone but when I go onto iTunes to update my iPod its not in my library
Sync your iPhone to iTunes to copy the iTunes purchases to the computer.
Or iTunes prefs > Store.
Tick Show iTunes in the Cloud purchases then click the Cloud icon after the song names to download them.

I'm trying to burn my audiobooks on CDs. Got through three books just fine, then my CD/DVD drive "disappeared." I rebooted and got it back, but iTunes says, even after I un- and re-installed it, that it doesn't have the registries to burn CDs.

I'm trying to burn my audiobooks on CDs. Got through three books just fine, then my CD/DVD drive "disappeared." I rebooted and got it back, but iTunes says, even after I un- and re-installed it, that it doesn't have the registries to burn CDs. How can I retrieve this capability? My audiobooks are from Audible.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

I have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please..

i have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please

Did you buy PSE in the mac app store? If not, just go to Help>Updates in the editor and update camera raw and you should be able to open the raw files in PSE 12 directly without the DNG converter.

I have downloaded ADE 3 on my macbook. It did recognize my Aluratek Libre the first time I used it but now it does not. I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre. Help pls

I have downloaded ADE 3 on my macbook. It did recognize my Aluratek Libre the first time I used it but now it does not. I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre. Help pls

If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

I have downloaded and 'installed' Mavericks, restarted but it's still 10.8.5 and the Mavericks Install is still in my Applications folder. I've done this three times, still no result. Help!?!

Similar Messages

Maybe you are looking for