I have downloaded overdrive on my windows 8.1 and authorized it for digital editions how to download my library book on overdrive bookshelf to my kobo

I have downloaded overdrive on my windows 8.1 and authorized it for digital editions How do I download the library book on overdrive to my kobo

This is probably the article that you were referring to with the registry fix:
"Help! After installing Windows 8.1, my USB drive disappears or file transfers
stop unexpectedly..."
This article was updated to state that the registry workaround is no longer required, as the Update has a fix in it. However, you still might want to check the power settings and make sure 'suspend' is disabled.
Hope this helps,
David
Windows Outreach Team - IT Pro
The Springboard Series on TechNet

Similar Messages

  • I downloaded and re-installed Adobe Digital Editions so that I could get books from the library and read them on my tablet. It is not working and my tablet cannot open the books??

    What can I do? I am 68 y/o and not very computer literate.  I put an micro SD card in  my computer to copy the books (also some ebooks that I bought from a retailer) onto the SD card so that I could read it on my computer or my ereader by puting the card into the reader (tablet or whatever you want to call it).. HELP

    Please follow the below steps and check:
    1) Right click on the book in library that you want to copy from your computer. Click on the "Show File in Explorer".
    2) Copy/Paste the book from this location to your SD card.
    3) On your tablet open the book from your SD card in your ereader.
        You need to make sure that you authorize your ereader with the same ID with which you authorized your computer. In case you do not remember which ID you used for authorizing your Digital Edition, click     Help-> Authorization Information.
    Hope this helps. If it doesn't, please specify the ereader that you are using and the exact error message that you are getting. Thanks!

  • I have an app that should have upgraded to full version but didn't and still charged for it. How can I get the full version without having to purchase again?

    Is it possible to get a paid app re installed from an upgrade? I had a trial version upgraded but the upgarde failed but I was still charged for it.

    If you are using the same Apple ID, there will be no cost.
     Cheers, Tom

  • I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book

    I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book back as i have already paid for it once and i would not like to pay for it twice.

    If you haven't got a backup copy and if it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download (there is no guarantee that they will) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • I have lost my photos/videos when i imported from my ipad 2 to my new imac latest version and it's not reading the files.  I have downloaded iMac library manager and can see them. can someone shed some light please ?

    i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
    and it's not reading the files.  I have downloaded iMac library manager and can see them.  when i go back into iphoto i'm getting the following message :
    Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
    I don't know what to do - please help !!!!
    can someone shed some light please ?

    So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • Hi. I have updated my computer to Windows 8.1 and now suddenly my Apple TV can not find it. It says that home sharing is not on, but it is. This was working perfect beofre the upgrade.

    Hi. I have updated my computer to Windows 8.1 and now suddenly my Apple TV can not find the computer, it says "turn on the home sharing". Both of these are on, iTunes and Apple TV, what to do? It was working perfect before update.
    Thanks in advance.

    Make sure the firewall and wifi router is not blocking it you can likely see if its the wifi router by connecting by etherent cable that would mean itsopen in terms of ports

  • I have downloaded 2 free books and can't get them to work, I am on a macbook pro

    I have downloaded 2 free books and can't get them to work, I am on a macbook pro

    iOS devices only.

  • Two questions: Why is it made so difficult to simply download a library book and read it? More immediately important, I have DeepShadow 9781101181188 on my computer and cannot get Adobe Digital Editions to recognize or allow me to read it.

    Two questions: Why is it made so difficult to simply download a library book and read it? More immediately important, I have DeepShadow 9781101181188 on my computer and cannot get Adobe Digital Editions to recognize or allow me to read it.

    What is the error code ?

  • I have Photoshop CS on my Windows XP PC and I am updating to a newer PC with Windows 8. Am I able to install my version of Photoshop or will it interfere with windows 8?.

    I have Photoshop CS on my Windows XP PC and I am updating to a newer PC with Windows 8. Am I able to install my version of Photoshop or will it interfere with windows 8?.

    It is quite easy to transfer your files to the new Mac.
    When you start up your new Mac for the first time, it will guide you through the steps of setting up the operating system, and one of the steps will ask you to restore files from another PC, Mac or external drive.
    At this point, you can install Windows Migration Assistant on your old PC, choose the option to transfer files from another PC on the Mac and follow the on-screen steps. It will let you choose what you want to transfer, so make sure you transfer the folder with your photographs (normally, Pictures).
    After setting up your computer, you will have a lot to learn because it is a completely new operating system. Apple prepared some articles for new users that you may want to read in order to use your computer > http://www.apple.com/support/macbasics/ Also, if you live near an Apple Retail Store, there are workshops there to help you use your Mac

  • I have downloaded an audio book from I tunes.   How do I now access this?  is her an app like iBooks from audio books?

    I have downloaded an audio book from the I tunes store.  is here an app hat I can now access this from like the iBooks app?

    If you've downloaded it on your iPad then it should be in the Music app (and similarly for audiobooks that you sync from your computer's iTunes) - when you have audiobooks on an iPad you will get an Audiobooks option under the More button at the bottom of the Music app.
    Note that audiobooks are currently a one-time only download from the store (so they won't appear in the Purchased tab for re-downloading), so you may want to copy it from your iPad to your computer's iTunes via File > Devices > Transfer Purchases so that you can take a backup copy of it - it should copy over to the Books part of your iTunes library.

  • Using digital editions 2.0, I cannot transfer books downloaded to digital editions from library to my nook.  Error message: failed to write destination file.

    Using digital editions 2.0, I cannot transfer books downloaded to digital editions from the library to my nook.  I get an error message: failed to write destination file. At first, this happened once in a while but now every time. Help!!!

    Modern kobo books should just use regular Adobe DRM and be readable on compatible ereaders that are authorized to the correct Adobe ID.
    I understand older kobo book had different DRM: but I wouldn't expect those to
    When Adobe DRM book information say 'no copying', that generally means no copying outside those Adobe DRM limitations.
    You should be able to copy within the restrictions.  You can double-check that with the sellers (Kobo).
    Just double-checking
    the pocket book is Adobe DRM compatible?
    that you have authorized your pocket book with your current Adobe ID?
    menu/Help/Authorize Device when plugged into ADE:  Library/Authorize Device if using the older more reliable ADE 1.7.2
    If the pocket book is already authorized but to a different ID, you will need to deauthorize it first, ctrl-shift-E to ADE with device plugged in (or cmd-shift-E on Mac).
    Be aware that will lose the ability to read DRM books authorized with the previous ID.

  • Reviewing Windows NT Rights and Privileges Granted for SQL Server Service Accounts

    Hi Folks,
    I am an experienced .NET apps developer who has been tasked with writing a bunch of technical controls for all the SQL Server instances on a domain.
    So for the last month I have been diving in the deep end learning Powershell, dba and infrastructure tasks. This is still a work in progress, so be kind to me.. ;o)
    So the task I am stuck on is described in the section on 'Reviewing Windows NT Rights and Privileges Granted for SQL Server Service Accounts' http://technet.microsoft.com/en-us/library/ms143504(v=sql.105).aspx
    I have not been able to find cmdlets that gives me this information. I have found some exes which come frustratingly close like NTRights.exe. This lets me specify a computer name which is great, but only seems to let you set or deny permissions, not just
    list them!
    Any help with this would be very much appreciated as I am firmly stuck. As per comments above also bear in mind that up until around 1.5 months ago I had never used powershell / knew very much at all about SQL server admin etc. Feeling much more comfortable
    with them now, but much less so with Active Directory/ windows permission structures etc so please can I ask anyone kind enough to reply to try and keep the acronyms down as much as humanly possible.. ;o)
    Cheers 
    Kieron

    Hi Kieron,
    Take a look at this module, it makes permissions much easier to work with than what's currently available:
    https://gallery.technet.microsoft.com/scriptcenter/PowerShellAccessControl-d3be7b83
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • Can I download and install the Adobe Digital Editions in Linux?

    Can I download and install the Adobe Digital Editions in Linux?

    Tech specs are here
    http://www.adobe.com/products/digital-editions/tech-specs.html
    The supported operating systems are: Windows® XP SP 3 or Windows® 7 (32 or 64 bit running in 32-bit mode) and Mac OS X v10.6 or later.
    No Linux.

  • DIM-00035 You have entered and invlaid option for the -EDIT command

    Hi Experts,
    I am creating oracle instance using oradim utility. I am using oracle 9.2 on windows 2003 server.
    I have installed oracle 9.2 and created ORCL database as part of installation. Now I have deleted ORCL database using DBCA. Now I try to create a new DB instance.
    I ran the below command:
    c:\>oradim -NEW -SID <sidname> -SRVC OracleService<SID> -INITPWD <password> -pfile <pfilepath>
    I am getting the below error:
    DIM-00035 You have entered and invlaid option for the -EDIT command
    Please help me why I am getting this error even though I am creating new service.
    Thanks.

    The definition for INITPWD is:
    -INTPWD password is the password for the new instance. This is the password for the user logged in with SYSDBA privileges. Option -INTPWD is not required. If you do not specify it, then operating system authentication is used, and no password is required.
    The passwords for SYS and SYSTEM are created later - when the database itself is created. Nevertheless the error message is strange, there is no -EDIT option in the command. Moreover -NEW and -EDIT are mutually exclusive.
    Werner

  • I need to have my authorizations reset for Digital Editions, but cannot contact anyone at Adobe.

    I need to have my authorizations reset for Digital Editions, but cannot contact anyone at Adobe. Would like to purchase new devices for my reading, ubt need reset before I can.  How do I get in touch with someone at Adobe.  Everything on web site just goes in circles. 

    Adobe Live Chat: http://www.adobe.com/support/chat/ivrchat.html,
    or as a slight short cut try http://helpx.adobe.com/contact.html?product=digital-editions&topic=using-my-product-or-ser vice
    Click on 'I still need help' and then you should see 'Chat with an Agent' at the bottom of the page.
    'Ask our experts' will indeed just lead you back to this forum.
    Sometimes you will get ‘Sorry! All agents are busy— please check back soon.’
    Don’t refresh the page, just hang on and it should eventually go to ‘Chat Now, an agent is available’.
    They can reset your authorizations, and then you must reauthorize any devices you still need.
    (Unfortunately, Adobe haven’t got round to an admin website for viewing and editing authorizations.)
    Some of the representatives haven't been properly trained and don't know what to do (and claim there is nothing they can do);
    in that case the only way seems to be to give up that chat and try another session hoping for a properly trained representative.
    If your problem is with another device using Overdrive, Bluefire, Aldiko or similar third party app, it is recommended not to mention that app when on the chat, just mention that you have run out of authorizations  (E_ACT_TOO_MANY_ACTIVATIONS) .  Thanks to AJP_Bear for that tip.
     

Maybe you are looking for

  • How can I convert a Pages document to a jpeg file?

    I need to convert a design I created in Pages into either a jpeg file or creat an "object" out of the design.  I can't figure out how to do either one.  Thanks for any help you can offer!

  • Using JSPs as a generic text template language

    I am about to start a project with a lot of code generation. I intend to use templates to minimise the amount of println's in my code and to ease maintenance. I am looking at this style of code: For each file to be generated: 1) Set up a Javabean wit

  • Upgrading from SSM-10 to ASA 5525x

    We are upgrading from an ASA 5510 with a SSM-10 module to the 5525x ips.  Can we simply copy the config from the SSM-10 to the 5525x?

  • Acrobat XI Pro Mac: Changing Text Color moves Text within Paragraph

    Dear Acrobat Experts! I've been using Acrobat Pro for over a decade now (Win and Mac) - but Acrobat XI Pro Mac shows some behavior I cannot deal with: When I'm changing text color of say a couple of words within a paragraph, usually the formatting ch

  • CRVS2010 Beta - Minor wpf viewer bugglet / annoyance

    When designing a report on a WPF page, the page is marked as edited whenever it is brought into view (even when no objects have been edited).  The problem is that VS2010 won't allow you to activate aother edit window tab (view another file) until you