I have fixed -48

Very simple but requires a windows PC with itunes installed. I had experienced the -48 error with 2 back iPod 30gb called up india several times but the same thing happened again and again. I then took a tip from a mate and reformated my ipod to Windows and then synced it with my Mac and has now updated several times for about 2 weeks.
We need a real fix apple and soon.

Hi Angie,
From what I've read in other threads, a '-48' error is something to do with duplicate files....
This is only my opinion of course, but I doubt you'll need to return your iPod. Apple will hopefully resolve the problem with a iPod software update in the near future.
Best thing I can suggest for the time being is to open 'Disk Utility' & run 'Repair Disk' on your iPod's drive before each update:
http://discussions.apple.com/thread.jspa?threadID=767941&tstart=0
All the best,
Jason

Similar Messages

6.0.1 seems to have fixed my iPhone 5 battery life. Hypothesis as to why inside...

So after installing iOS 6.0.1, and being COMPLETELY angry with no mention of the battery drain glitch being resolved in the patch notes, I'm pleasantly surprised that I can report that my battery life is now BETTER than my iPhone 4 was. This is like a godsend! I used to see a percentage go down in less than a minute, but I've been at 94% for the past 5 minutes of usage at max brightness with all settings on like cloud, fetch, push, etc.
My best guess as to the glitch that caused the battery drain is that something was entirely funky with the way wifi and cellular was handled, and that was the glitch that was resolved that indirectly was causing diminished battery life.
I assume that Apple was aware of the glitch, but wanted to minimize bad publicity so they never acknowledged the problem, but worked on a fix silently. I'm not sure I agree with that approach, but the important thing is that they seemed to have fixed it, since the difference is so obvious to me that it's like night and day. Can anybody else confirm their battery life has also improved significantly?

I've been using my phone constantly for the past half hour with all features on and max brightness and its only gone down 5%.
It was going down over a percent a minute before with features turned off! It's so dramatic that it's hard not to notice.

After enabling cellular data, i am receiving mails even if disable "use cellular data for mail", due to this data usage usage use is more, if we have fix please let me know

Phone Model and OS
Model - iphone 5
IOS 8.0.2
Problem Description
After enabling cellular data, i am receiving mails even if we disable "use cellular data for mail", due to this data usage usage use is more, if we have fix please let me know.
Steps:
1. Enable Cellular Data
2. Disable mail on "use cellular data for mail
3. check whether mail is received or not
tried multiple times and i am getting more billing amount because of data usage

Mail isn't the only app using data. Turning it off there has no effect whatsoever on whether the rest of iOS or other apps you have installed. In fact most apps use data these days, at a minimum for Notifications and often for gameplay and other features.

How many problems do you need to have with a mac book pro to get it replaced i have had 6 problems and they say they have fixed everything and somthing new happends

how many problems do you need to have with a mac book pro to get it replaced i have had 6 problems and they say they have fixed everything and somthing new happends
I have had thehad the:
ram replaced
Battery
Audio
Trackpad
os operating system
fans
And they still won't replace the laptop for me worst buy ever but i have had a imac for 2 months and nothing at all wrong .

You could try calling Apple and ask for Customer Relations.
From Readers Digest-February, 2005
How to Complain
You call customer service to complain about a product, and you hang up angrier than when you started. That’s customer rage, a feeling experienced by millions of people with a major complaint, says Scott Broetzmann, president an American firm that tells companies how to offer the best customer service. His secrets to getting good service:
Have a goal
If you want your product repaired, say so. Want an apology? Speak up.
Keep it short
Focus on one problem, and be succinct.
Stick with it
You have to invest the time it takes. Don’t get what you want? Ask for a supervisor.
Skip ultimatums
Don’t threaten not to do business with them again. Why should they help you if you won’t buy from them in the future?
Plead your case
Many companies have information such as how much money you’ve spent with them and how often you complain. If you’re a good customer, they may be more willing to help.
Be nice
You’re unlikely to get what you want if you’re rude.
Good luck.

I upgraded to iTunes 11.1.4 and at first iTunes didn't work so i came on here and found a way to fix it. Now that I have fixed it my iPod does not appear on iTunes or on my computer.

I upgraded to iTunes 11.1.4 and at first iTunes didn't work so i came on here and found a way to fix it. Now that I have fixed it my iPod does not appear on iTunes or on my computer.

Removed. Re-synced. Still not working. Factory reset the phone, re-installed music... made a GIANT "Other" file instead of actually adding any songs.
Factory resetting again. Any other solutions?
EDIT: If It helps, I'm doing this all over USB connection, not trying to sync music through wifi or anything.

I belive I have fixed the video clip pan updating problom in iMovie hd.

I belive I have fixed the video clip pan updating problom in iMovie hd. I have been using my VCR with my Director's Cut 2 video converter with my iMac G5. To convert my VHS home movies to DVD. The problom I had been having is when I captuerd the video to my Mac is when I go back to play it back. I would click on a video clip and it would tell me it had to update the file and then I could play the clip. That drove me nuts. So first I went to the Apple store and I got the new iLife 6. So then I come home and update everything with it. Then I test it again same thing happens to me. Well to say the lest I was lived mad. Till I thought of something let me try one more thing. So I went for brocke. I hooked up my mindv camcorder and my VCR though the pass though A/V pass though conector and then I hook the cam up to my Mac. So I go to record bingo. I hit the clip and it did not have to update then I made more and more and bingo I think I fixed it nock on wood. But I also ordered a Canopus 110 video converter to see if. I can get it to work were I do not have to use my mindv cam to do the convertion all the time and ware it out. Some how my DC2 was making the video clip it took into a difrent formate some how go figuer.

You might hit it lucky as there's a free conversion program called MPEG Streamclip <This Link is a direct download>. You can download it and drag one of your clips into the App Window then Export it to .mov (In the window that pops up there's a pulldown list and you should Choose Apple Intermediate Codec (AIC).
Do you know what format the videos are in? Do they have a 3 letter file extension like .mpg, or .mts or .m2ts or anything like that?
< Edited By Host >

Illustrator crashing after 16.0.1update, 16.0.2 update seems to have fixed it

I am running win7 with latest updates, running Illustrator (64-bit) from CS6 Web and Design Premium Suite.
Illustrator crashed 6 times this week after installing the updates from the end of last week (update 16.0.1). The updates that were released today seem to have fixed it, although I cannot absolutely confirm this.
I have spent the past hour trying to break the software doing the same tasks that caused crashes earlier this week, and then far more extreme tasks then I would ever actually do or need to do, and have not been able to recreate the same crash problems.
I have been using Illustrator for nearly 15 years, it's been very rare that I've ever experienced an illustrator crash like what was happening after the 16.0.1 update. I didn't have time to troubleshoot the issue until today, fortunately the 16.0.2 update seems to have resolved the issue. If the issue returns I will follow up with another post - it's rare though that I find an article that says "I've had this problem, but it looks like you fixed it". Thank you Adobe for the fix.

my apps still dont work =[
new ones i download work but the old ones dont!!
how do i fix this? i dont want to uninstall every single app
and i have tris.. how can i re-download that?! i cant if i take it off
anyone know how to make my old apps work?

HT5704 Hi, Two recent updates for my iPhone have caused crashes (down the white lead via iTunes).I have "fixed" but not sure of the cause?

Hi,
Two recent updates for my iPhone have caused crashes (down the white lead) via iTunes.
I have "fixed" but I don't know the cause?
Each time the update does n't complete.
The download does n't happen.
The computer & internet connection are good.
It is as if the Apple server does n't complete?
The phone stays in recovery mode, until you reset and rebuild in iTunes.
All software is up to date, but I can't find the cause
ANY IDEAS?
Regards,
P.
<Email Edited by Host>

No error messages.
It just fails to complete the download, so recovery mode is the next step.
This can be over a period of eight hours or more!
I have so many (original) Apple USB leads that I would n't know if I have been using the same one (if it was faulty).
Does this sound like a "common" problem?

My iPhone 4s won't turn on, it turned off by itself now it says plug into iTunes? I don't have a computer is this something I can have fixed at the store?

My iPhone turned off by itself and says to plug into iTunes and won't turn on. Is this something I can have fixed at te store? I don't have a computer with iTunes..

You should be able to restore the iPhone, just connect it to the computer and open iTunes.
Make sure you have the latest version of iTunes installed and take a look at this, if you run in to a problem.

Ipad keyboard is bad placed in IOS6.1.2 it is on the center of the screen does it have fix?

ipad keyboard is bad placed in IOS6.1.2 it is on the center of the screen does it have fix?
it is in safari and other apps

Hold down on the Keyboard key, (bottom right of the keyboard) and drag it down, or press and hold on the keyboard key and tap on the "Dock.and Merge" option from the menu that comes up.

My iPhone 6 wont come on when home button is pressed and screen pixels out and fades. Any one have fix or same problem?

My iPhone 6 wont come on when home button is pressed and screen pixels out and fades. Any one have fix or same problem?
When I press the home page the screen activates but stays black. I have to press the side button to turn if off then may have to repeat several times to get my phone to come on. Sometimes while using the phone the screen will become pixelly and start to fade away leaving a white screen with vertical line on it. I have to use the close button to make it go away.

If one of the two major buttons of your phone is broken, it is unfair to expect normal operation to be available. The first resolution to any problem involves a usable Home button, as does the second option for resolving any problem. Get your Home button fixed.

Thanks everyone for your help. I have fixed it.

Thanks everyone for your help. I have fixed it.

can I remove CS5 without creating a problem with CS6 Upgrade?
http://forums.adobe.com/thread/1024708
The poster has not linked the follow up thank you with the original thread.

LineChart: How to have fixed interval on X-axis

Hi All,
I am flex newbie. I am trying to figureout how to have fixed interval (say 7) of X-axis in a LineChart. I have tried AxisRenderer, CategoryAxis and DateAxis to no avail. Can you refer to an example or a snippet which would help to resolve this problem.I have pasted my code here below. Thanks in advance.
<mx:LineChart
id="DOLoginGraph" dataProvider="{doLoginGraphData}" paddingTop="10" width="100%" height="100%"
showDataTips="
true" backgroundElements="{gridLinesDOL}" >

<mx:verticalAxis>
<mx:LinearAxis baseAtZero="true" maximum="40" interval="10" />
</mx:verticalAxis>

<mx:horizontalAxis>
<mx:CategoryAxis id="horiDateAxis" categoryField="date" />
</mx:horizontalAxis>
<mx:horizontalAxisRenderers>
<mx:AxisRenderer placement="bottom" axis="{horiDateAxis}"/>
</mx:horizontalAxisRenderers>

<mx:series>
<mx:LineSeries yField="value" showDataEffect="{chartEffect}" form="curve" displayName="Open" >
<mx:lineStroke>
<mx:SolidColorStroke color="#32cd32" weight="2" alpha=".8"/>
</mx:lineStroke>
</mx:LineSeries>
</mx:series>
</mx:LineChart>

LinearAxis:
    // interval
     * @private
    private var _userInterval:Number;
    [Inspectable(category="General")]
     * Specifies the numeric difference between label values along the axis.
     * Flex calculates the interval if this property
     * is set to <code>NaN</code>.
     * The default value is <code>NaN</code>.
     * @langversion 3.0
     * @playerversion Flash 9
     * @playerversion AIR 1.1
     * @productversion Flex 3
    public function get interval():Number
        return computedInterval;
     * @private
    public function set interval(value:Number):void
        if (value <= 0)
            value = NaN;
        _userInterval = value;
        computedInterval = value;
        invalidateCache();
        dispatchEvent(new Event("axisChange"));

I seem to have fixed my problem of randomly occuring errors in my filterwheel control. But I don't know why this should actually work.

Hi there,
I am using a thorlabs fw102B filterwheel. It's connected via USB (simulating COM port, that's what it says in MAX). The second device is a camera, also connected via USB. The application is running 24/7, at least that's what it's supposed to do. LabView version is 8.6.
The LabView code I wrote for this, was never really finished, meaning I totally ignored error handling in the first program version. That never bothered me, because the program ran for weeks and months without any problem. Whenever I had to reboot my system it was not LabViews fault, but I was changing something else.
Recently I was running into problems with the filterwheel (after a system reboot). However, I don't understand the error in the first place: The filterwheel is supposed to change position every 15 minutes, in between the camera is taking exposures, then the data is written to an ASCII-file (only ~156 kB). At first the error occured just once: the filterwheel was set to the wrong position for about 15 minutes, which might happen, as it is not really could in counting. A few days later it was in that wrong positon for one hour, so it didn't respond to the "move" order four times in a row. Finally I didn't move at all anymore. The error message I was getting is "0xFFFFFFF unkown status code". In my opinion the communcation to the filterwheel got lost somehow. I don't know a better explantion.
But why should it recover after some time?
The problem usually occured at night, when nobody is there to watch.
I investigated the behaviour in a second setup (see attachment). There is only the filterwheel connected. Through randomly unplugging the USB or power cable I was able to reproduce 'session handle is not valid', 'unkown status code' and 'session handle lost'. The program enters the 'true case', the session is to be closed and resetted, then it shall be reinitialized. This actually works as soon as the cables are reconnected. But why?
The close.vi still returns 'session handle is not valid', The reset.vi returns the same, but initialize.vi returns 'No Error' and the system works again.
What am I not getting here?
I read some threads here and somebody mentioned for another instrument/problem to use the 'reset' command twice. So I tried 'close-initialize', 'reset-reset-initialize', 'reset-initialize' but only 'close-reset-initialize' works (not surprising). Yet I still get the same errors (probe 1 and 2). Am I introducing more bugs without knowing than I fixed?
I AM CONFUSED.
Carsten
Attachments:
error_catch.png ‏273 KB

Hello Ulrich,
thank you for your answer. Concerning the dataflow I agree and it is what I usually do. Actually I follow the dataflow paradigm whenever there is no problem (the 'false case' in the screenshot):
“FW102x Initialize.vi” -> “FW102x Get Position.vi” -> “FW102x Set Position.vi”.
Whenever there is a mistake, this just doesn't work with these drivers. The sequence
“FW102x Initialize.vi” -> “FW102x Get Position.vi” -> ///error/// -> “FW102x Close.vi”, “FW102x Reset.vi” ;; “FW102x Initialize.vi”
will give me errors for “FW102x Close.vi”, “FW102x Reset.vi” and “FW102x Initialize.vi” reporting "session handle not valid". However, if I "bypass" the instrument handles directly from the first "Initialize" to "Close" and "Reset", they will report the same error, but the second "Initialize" will work again. I can even merge the first two frames and execute "Close" and "Reset" at the same time to do so. But whenever I try something else, e.g. do the 'correct' wiring, I am unable to close, reset or reinitialize. I have to restart LabView completely, to make the vi work again. So I guess the session is still hanging around somewhere in memory, but I can't access it anymore.
Surprisingly, wherever I put Probes on the data handle wires they show the correct "ASRL5::INSTR" (with or without correct wiring). But only the "Bypass" wire makes the vi work. Since you couldn't find the drivers in the driver network, I guess they might just run into problems, if an error occurs.
But thanks for your comment anyway. The problem is fixed for the moment. It's just that I prefer to actually know what I am doing here instead of producing some code I'd rather not show anyone.
Carsten

You need to fix the "hangup" issue that firefox has. I close the browser, and 24 hrs later, it's STILL eating up all my processor time.. this IS an issue you need to have fixed.

I dual boot between Win XP Pro x64 and Win 7 Ultimate x64. I also have a 2nd pc running strictly XP Pro 32 bit, and it's the same problem. Close the browser, and everything else takes a long time to load, even the security screen for Win7. then it takes a few minutes for task manager to show up. Seriously, I love the browser any day of the week over Chrome or IE. Fix it. kinda hard to do much when the browser is eating 90%+ of the processor

I greatly appreciate the suggestions and the links.. I honestly looked earlier, but didn't find the ones you posted. My fault there. I have looked at them, and for all intents and purposes, I've already taken the steps they've suggested: disabled all plugins and extensions. Removed/uninstalled all plugins/extensions. Uninstalled and re-installed Firefox, no plugins or extensions.
The problem still occurs. This isn't a problem that just started occurring, but has been relatively consistent in appearing since, v3.1 ( i think? Been going on for quite awhile)
I'll continue to try and find just what is happening, but honestly.. I really do not believe the problem is my system.

Do you have fix for Photo Booth Audio and Video are not syncing properly, Do you have fix for Photo Booth Audio and Video are not syncing properly

My audio and video are not syncing properly. There is a lag from the audio to the video. Does anyone have a permanent fix for Photo Booth where the Audio and Video are not syncing properly?

If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads. You aren't the only one having this problem.
One person having a Photo Booth problem, although not the same one as you are having solved it by running Disk Utility/Repair Permissions.

I have fixed -48

Similar Messages

Maybe you are looking for