I have got in a wrong website and it is a chatroom like Skype,I don't know that  whether the iPad will turn on the camera automatically or not?I use the puffin web browser.thank you.

Will the iPad turn on the camera automatically  when I get in a chatroom in Internet ?i am using puffin web browser.thank you.

sailsalot wrote:
I have a new ipad and have used the community to answer questions for myself.  Your help has been great!  I don't know how you got my sailsalot name from my Skype account but I signed in with you as "gags76" and got help with my new ipad.  I discovered I used a different Apple id and password on my ipad from my computer (imac) and changed that.  My e-mail is   Could you email me if there is something I should do at my end.  I have to use itunes to sync with my ipad so I have been going back and forth between the two.  Should I sign in with my proper Apple id on my ipad?
Yes

Similar Messages

  • HOw do i connect my hotmail to my blackberry, I had it on before and it recently stopped. I can't remember how I did it the first time. Thank you Pamela Duca

    HOw do i connect my hotmail to my blackberry, I had it on before and it recently stopped. I can't remember how I did it the first time.
    Thank you
    Pamela Duca

    Hi!
    If it was working before and you are on the same BB, I suggest doing these steps:
    Full reboot:
    With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation.
    If that does not restore the delivery of your emails, then re-push your service books:
    http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB02830&slic...
    Lastly, since it's HotMail, it may be that you have not done the recently required re-validation:
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB13137
    Hopefully one of those will work!
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT201240 I tried to reset my login password last night and I must have typed in a wrong letter when i reset my password.  Now I don't know either my login or administrative password and I can't do anything on my computer! How do I reset the passwords?

    I tried to reset my login password on my macbook last night and I must have typed in a wrong letter when i reset my password.  Now I don't know either my login or administrative password and I can't do anything on my computer! How do I reset the passwords?

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

  • Hi, I'm designing my 1st website and I started it in  photoshop cs5.5. I know that it's bad practice

    Hi, I'm designing my 1st website and I started it in  photoshop cs5.5. I know that it's bad practice to build with images, I learned this too late. I imported my site into Dreamweaver cs5.5 and uploaded it to my server. The problem I'm having is that I want to apply a jquery drop down menu bar but whenever I try, I get white gaps within my page. How do I convert the coding into a functioning site?*Help Please*  The URL to my site is: http://www.coriemoment.com and this is my coding:
    <html xmlns="http://www.coriemoment.com"
    <head>
    <title>The Official Corie Moment Home</title>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    </head>
    <body>
        <div id="=container"
    <body bgcolor="#FFFFFF" leftmargin="auto" topmargin="auto" marginwidth="auto" marginheight="auto" margin:0;>
    <!-- Save for Web Slices (home.psd) -->
    <table id="Table_01" width="1281" height="768" border="0" cellpadding="0" cellspacing="0">
              <tr>
                        <td colspan="6">
                                  <img src="images/index_01.png" width="1280" height="220" alt=""></td>
                        <td>
                                  <img src="images/spacer.gif" width="1" height="220" alt=""></td>
              </tr>
              <tr>
                        <td rowspan="4">
                                  <img src="images/index_02.png" alt="" width="414" height="548"></td>
                        <td rowspan="3">
                                  <object width="564" height="423"><param name="movie" value="http://www.youtube.com/v/XbuQiJ6Sv_M?hl=en_US&version=3"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/XbuQiJ6Sv_M?hl=en_US&version=3" type="application/x-shockwave-flash" width="564" height="423" allowscriptaccess="always" allowfullscreen="true"></embed></object></td>
                        <td colspan="3">
                                  <img src="images/index_04.png" width="255" height="89" alt=""></td>
                        <td rowspan="4">
                                  <img src="images/index_05.png" width="46" height="548" alt=""></td>
                        <td>
                                  <img src="images/spacer.gif" width="1" height="89" alt=""></td>
              </tr>
              <tr>
                        <td rowspan="2">
                                  <img src="images/video_03-07.png" width="1" height="336" alt=""></td>
                        <td rowspan="3">
                                  <img src="images/index_07.png" width="34" height="459" alt=""></td>
                        <td>
                                  <script src="http://widgets.twimg.com/j/2/widget.js"></script>
    <script>
    new TWTR.Widget({
      version: 2,
      type: 'search',
      /*put your twitter id that people use to reply to you below. Mine is mhorning. If you only want to see the Tweets that you have Tweeted, then delete the part below that says- OR to:coriemoment */
      search: 'from:coriemoment OR to:coriemoment',
       /*this is the duration in terms of seconds*/
      interval: 30000,
       /*this is the title you want on your tweets*/
      title: 'Corie Tweets',
      subject: 'Send us your comments',
       /*setting width to 'auto' will adjust the width of your tweetbox to whatever is set on your div. You can change this to something like 500px if you want*/
      width: 'auto',
      height: 212,
      theme: {
        shell: {
                 /*this will change the background color of your tweetbox. It is currently yellow*/
                background: 'body p, body img, body embed, body object, body video{opacity:1 !important}',
          /*this will change the color of the text in your background*/
                color: 'fac935'
        tweets: {
                 /*this will change the background color behind your tweets. It is currently white*/
                background: 'body p, body img, body embed, body object, body video{opacity:0.2 !important}',
           /*this will change the color of the text in your tweets. It is currently black*/
                color: '#000000',
           /*this will change the color of anything that is hyperlinked in your tweet. It is currently blue*/
                links: '#1985b5'
      features: {
        scrollbar: false,
        loop: true,
        live: true,
        behavior: 'default'
    }).render().start();
    </script></td>
                        <td>
                                  <img src="images/spacer.gif" width="1" height="302" alt=""></td>
              </tr>
              <tr>
                        <td rowspan="2">
                                  <img src="images/index_09.png" width="220" height="157" alt=""></td>
                        <td>
                                  <img src="images/spacer.gif" width="1" height="34" alt=""></td>
              </tr>
              <tr>
                        <td colspan="2">
                                  <img src="images/index_10.png" width="566" height="123" alt=""></td>
                        <td>
                                  <img src="images/spacer.gif" width="1" height="123" alt=""></td>
              </tr>
    </table>
    <!-- End Save for Web Slices -->
    </body>
    </html>

    mazz2000 wrote:
    The best way to do it is go back to PS and place the navigation area in the design, i would make it 100% of the width and then re-slice the design making sure one single slice is the whole of this navigation area.
    That would be the best way to do it while still using a table layout which in and of itself is not recommended, in large part  for this very reason.
    Every time you want to make a small change to the layout of your site, it will require re-slicing and re-generating code out of PS. You would be much better off taking the time to understand css layouts. Here is a good place to start to get the basics of css: http://www.w3schools.com/css

  • I installed the 5.0 update and now I can't reinstall my SEOBook toolbar that I depend on for work! How do I uninstall Firefox 5.0 and go back to an earlier version of Firefox so I can reinstall the SEOBook toolbar? Thank you!

    thank you!

    '''If you are having a specific issue with Firefox 5, please post the details, and someone on this support forum will try to help you.'''
    With Mozilla's accelerated release plan, the "plan" is for 5.0 to replace 4.0.1, with no further support for 4.0.* versions.
    *This will also be the case with versions 6 and 7, currently scheduled for release later this year.
    *As new versions are released, support for the prior version will be dropped.
    *The only exception, as of right now, is that version 3.6.x will continue to be supported for 3-4 months, as of this posting.
    No significant user-interface changes occurred between Firefox 4 and Firefox 5.
    95% of the Add-ons hosted at the official Add-ons website are compatible with Firefox 5.0 - https://addons.mozilla.org/en-US/firefox/compatibility/report.
    For extensions that are hosted elsewhere, you can try using this extension - https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ - to force "incompatible" extensions to be enabled in 5.0 and see for yourself if they work. Then there's a "compatibility" button in the Add-ons Manager tab to report if each extension is working properly or to tell the developer of each extension what problems you're having.
    <br />
    <br />
    '''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
    *Adobe Shockwave for Director Netscape plug-in, version 11.5.9.620
    *Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
    #'''''Check your plugin versions''''' on either of the following links':
    #*http://www.mozilla.com/en-US/plugincheck/
    #*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #*There are plugin specific testing links available from this page:
    #**http://kb.mozillazine.org/Testing_plugins
    #'''Update Shockwave for Director'''
    #*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    #*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
    #*When the download is complete, exit Firefox (File > Exit)
    #*locate and double-click in the installer you just downloaded, let the install complete.
    #*Restart Firefox and check your plugins again.
    #*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
    #'''Update the [[Java]] plugin''' to the latest version.
    #*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
    #**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
    #*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
    #* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
    #* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
    #*Java Test: http://www.java.com/en/download/help/testvm.xml

  • I just downloaded Firefox on my maxpro and now I have 3 (three) icons on my desktop. if I only need one icon, how do I get rid of the other 2? Thank you.

    When I was trying to download, I wasn't certain whether I was being "prompted" to attach the firefox icon to my application folder. When I didn't see the icon in the folder, I tried again - probably a total of 3 times. I searched my application folder and finally found firefox - it was in the form of a piece of paper - when I clicked on the paper the 3 icons appeared on my desktop. I surmised that I had successfully downloaded firefox 3 times...but I really don't trust myself in deleting 2...lest I thereby delete all of the download completely. Further, if it is safe to delete 2, is it enough to simply press the delete button over the icons to be removed or do I have todo something else?

    You only need a Firefox icon, which you drag to the Applications folder alias after downloading the Firefox .dmg file.
    Once the "Firefox" icon is inside the actual Applications folder, all other icons can be moved to the trash, including the Firefox .dmg installer, which looks like a piece of paper. The Firefox disk image, which looks like an external hard drive or Flash drive icon, should be ejected.
    See
    [[Installing Firefox on Mac]] for details.

  • How do i change the boring white background that shows the google search button, thank you

    i have changed the tool bar backgrouind for something a bit more colourful but want to add a background picture to where the google search button is shown, at the moment its just boring white, hope you can help

    Add code to userContent.css
    * http://kb.mozillazine.org/userContent.css
    * http://kb.mozillazine.org/Editing_configuration
    You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
    * ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
    <pre><nowiki>@-moz-document url-prefix(about:home){
    body{ background: url(bg-image.jpg) rgb(180, 218, 244) center no-repeat }
    #contentContainer { background-image: none !important }
    #snippetContainer { display: none !important }
    }</nowiki></pre>
    Place the background-image (bg-image.jpg) in the chrome folder with the userContent.css file.

  • HT201401 After changing the sincard I cannot dile any number and I get a message " call failed " I don't know what is the problem

    The simcard  have been changed twice by the carrier VODAFONE but still the problem exist

    hello flabs, this is likely caused by an outdated extension. in case you have the social fixer addon installed, please update it to the latest version that is available at http://socialfixer.com/blog/category/releasenotes/.

  • HT1926 Why ,when Itry to install the latest update for iTunes does it say that my iTunes signature is "invalid" when I have used this same computer for years and have installed all the previous updates? Thank you.

    Why, when I try to install the latest iTunes update, itsays that I have an "invalid" signature...I have used this same machine and have installed all the previous updates with no problem.

    That one suggests the installer has gotten damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • I have to transfer volume licensing CS6 design and web premium, but I don't know what is the right module. I've found many, all different...thanks

    I have to transfer volume licensing CS6 design and web premium (between 2 End Users) but I don't know what is the right module. I found some, in Adobe's website, but all different...
    One module for transferor
    One module for recipient
    One module for both parts
    I filled the forms, I signed them , I called the assistance for case number and they've sent me another module:
    one module for both of parts, without field for to insert serial number...
    What have I do? Which module must I use? I'm becoming histeric!
    Thanks to all for help
    Letizia

    Volume Licensing
    http://helpx.adobe.com/x-productkb/policy-pricing/volume-licensing-site.html

  • HT1665 I have the iPhone 4S and would like to purchase docking device6. I have the Otter Box Camo case and would like to know which dock will work with the case ON. Thank you.

    I have the iPhone 4S and would like to purchase a docking device.  I have the Otter Box Camo case and would like to know which dock will work with the
    case ON.   Thank you.

    it might be better to contact otterbox to find out from them what they made it compatible with. 

  • I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you

    I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you

    Thank you for your valuable advice. I've solved the problem right now.
    Thanks
    2015-03-16 15:06 GMT+01:00 c.pfaffenbichler <[email protected]>:
        I have Photoshop CS 5.5 version, but I've just changed my camera and
    I can't open my raw files. I need for my new camera Photoshop CC and Camera
    Raw 8.7 version. How can I do to update the old version? Thank you
    created by c.pfaffenbichler
    <https://forums.adobe.com/people/c.pfaffenbichler> in *Photoshop General
    Discussion* - View the full discussion
    <https://forums.adobe.com/message/7302535#7302535>

  • Hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

    hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

    hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

  • I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

    I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

    Add-ons contain a range of compatible Firefox versions, and Firefox honors the listed range by disabling the add-on if you are trying to run it on an unlisted version.
    I'm sure Yahoo! will update its toolbar eventually, but not every add-on maker supports beta versions of software.

  • I am looking to make the switch from pc to mac and have been eyeing the MBP 13". I would like to know whether it is fine to add RAM and SSD myself? any compatibility or warranty problems? what brand/type of RAM and SSD is the best fit? thank you.

    i am looking to make the switch from pc to mac and have been eyeing the MBP 13". I would like to know whether it is fine to add RAM and SSD myself? any compatibility or warranty problems? what brand/type of RAM and SSD is the best fit? thank you.

    Chamar wrote:
    I'm possibly wrong here but I suspect opening a brand new MBP to add parts yourself will void the warranty.  It is probably in the small print.  I certainly would not risk it for an expensive Apple product.
    Some (Windows) laptops have easy access to memory and disk slots that do not necessitate taking the complete back cover off.  However, Apple does not make life easy for you.
    However, if you are going for a 'used' machine it is probably worth a try.
    Not possibly, definitely wrong, Ram and Hard Drive are considered user replaceable and will not void the warranty if changed.

Maybe you are looking for

  • Error message MIGO057 with movement 101 E when doing a GR on a STO

    Hello SAP experts, Here is my scenario : I have Unrestricted stock in a plant. I want to move this stock in another plant in the same company using Stock Transport Order. When I enter the stock in the receiving plant, I want to enter the stock in the

  • Blue screen of death out of control and a pain

    Hi, I recently reinstalled Windows Vista 64 bit on my computer, and now my computer is acting really slow to the point of a blue screen of death. I even tried Windows Update and it even blue screened on me. Any help will always be appreciated. My Com

  • Gestures intermittent in Lion

    I have a Unibody MacBook Pro 15" 5,3 Mid 2009 3.06 GHz 8GB RAM. Using 1Mac OS 0.7 Lion. Multitouch gestures are working intermittently. Switching between desktops and full screen apps (3 finger left right swipe) and bringing up Mission Control (3 fin

  • Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT

    I am unable to provision DSfW after installing it. The Provisioning PreCheck is successful, but the Configure DNS portion fails. It looks to me as though the installation did not create a DNS Locator object in eDirectory. It seems as though we had so

  • Regarding Invoice No 1003 in SAP Demo Database

    Hi In sap Demo Database SBODemo_US, for Invoice no 1003, for an item A00006 Price is given as 786.60. Choose Goto Menu and further choose Gross Profit, it displays the base price and Sales Price(770.87). How can the price be different at two places?