I have had a new mac pro. and i installed office mac 2011. however, whenever i try to start word, excel or powerpoint, it always appears 'what's new in Word: Mac 2011. what should i do?
i am using the Microsoft Word:Mac 2011. however, whenever i open the folder, it appeared "what's new in Microsoft Word: Mac 2011 and stay there forever. i can not do anything else. what should I do to create a new document or open an old ones?
thank you
Do you not have a Continue button at the lower right of that screen? Click it and the box will flip over. Click Cancel and shut down Word. Launch it again to get the same screen of document choices. You now have an check box at the bottom for "Don't show this when opening Word". Check the box if you prefer not to see this project manager, then click Cancel. The document manager will go away and you'll be presented with a blank document. This is way it will now always start.
Similar Messages
-
New Macbook pro with lion
Firefox 10.0Hi dcast01,
Are you saying that it restores your old tabs when you restart? Have you looked at ''Preferences > General'' to see if Firefox is set to restore your tabs from the last session? You should change it to ''When Firefox Starts: Show my home page''.
Or is your issue that you keep seeing the tab that says "welcome to firefox" when you start the browser? If that's the case, you should look at [https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox this article about that specific issue] and the article [http://kb.mozillazine.org/Preferences_not_saved Preferences not saved]. These should give you all the information you need!
If that doesn't work:
# Type about:config in the address bar
# Click ''I'll be careful, I promise'' if prompted
# In the Filter input field type ''startup''
# Double click on startup.homepage_override_url
# Delete the text string and click ''OK''
# Close Firefox and reopen the window to verify that it has worked.
Hopefully this helps! -
Can I remove a CD Rom from one Mac pro and re-install it in another mac pro
One mac pro, my computer has a CD ROM that doesn't open and my brother's old Mac Pro has a CD ROM that still opens and closes how easy would it be for me to remove the CD ROM from my brother's old Mac Pro and re-install it in my Mac Pro
2008 and previous used ATA/IDE DVD Readers.
2009 and later used SATA DVD Readers.
You cannot cross the line without changing the cabling, which may be more expensive that just replacing the drive with a new one.
You both should be sure to update to 10.6.8 if you have not already done so, to provide enhanced malware protection. If you cannot do that, turn off JAVA (not javascript) in all your Browsers. -
i bought a new macbook pro ,and i wnt to upgrade it to lion can i do that for free, if so how?, i bought a new macbook pro ,and i wnt to upgrade it to lion can i do that for free, if so how?
Apple has information at the link below.
http://www.apple.com/macosx/uptodate/
Stedman -
MAC Pro and Custom Install of X11
I am obviosuly missing something really simple here but how do you do a custome install on the MAc Pro. I cannot find the otpion, that I though was availbe to me on my old G5. I am not happy about starting the MAC using the Install disjk as it seems to suggest that this will do a re- install of the OS without giving me the option to select only the X11 software
Thanks for the help
JohnYou're welcome, glad to have helped.
Steve
Why reward points?
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.
Members can see their status level by Forum, Category, or at the main Community level.
This is not compulsory, but it would be appreciated.
Steve -
I have an ipod shuffle (about 2-3 years old) and bought the 4th generation shuffle for my daughter. When I try to set hers up, it takes me to a summary page, and on the left I can see ipod, version, options but the squares that I would click on have nothing next to them. So I don't know what I am trying to put on the ipod. Then if I click on music (sync music, playlist, artist), again, I can see the squares but not the words next to them. Does this have anything to do with the other shuffle or computer sharing? I am unhappy right now and have to get this fixed in two days. HELP!!
For Honme Button try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
You can live with the existing battery life or
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery ourself if you are up to it
iPod Touch Repair – iFixit -
I have a new macbook pro and want to purchase adobe photoshop. How can I do that with apple retina display compatibility? Does anyone use photoshop on your mac?
Adobe is moving from the purchase of a license for their software to the renting of it. I'm old school so I'd prefer a perpetual license. But you already have a subscription to Illustrator so I guess it'd be advisable to look into whether expanding the subscription to include other software will save you some money. Also I remember something about Adobe adding features to its Cloud version which aren't also added to the licensed version and a different way of handling updates and upgrades. Indeed, Adobe states that CS 6 has reached the end of the road. So if you're going to stay with Adobe, you may very well be stuck.
I'd suggest spending some time in the Adobe Communities. You'll likely find people complaining about choices they've made that you'll have to make too. Let them be the beta testers. -
I have used my older Mac Pro and now my new 2011 iMac fo play the many movies and TV shows I have dowloaded. Great results.
But I also have a lot of Blu Ray disks.
I am going to load windows 7 via Boot Camp for other reasns. After that is done, and even with an external Blu Ray player, is it still not possible to play Blu ray movies?
Thanks for your consideration.....I have used my older Mac Pro and now my new 2011 iMac fo play the many movies and TV shows I have dowloaded. Great results.
But I also have a lot of Blu Ray disks.
I am going to load windows 7 via Boot Camp for other reasns. After that is done, and even with an external Blu Ray player, is it still not possible to play Blu ray movies?
Thanks for your consideration..... -
I have a CC subscription and had it loaded on my Mac and my old MacBook pro. I bought a new macbook pro and turned off CC on my old laptop but when I try to load it on the new one it keeps saying I already have it activated on two devices. Help!
Contact support by web chat or phone to reset activations.
Mylenium -
I need to be able to right click on a saved document and have the option to convert to Adobe PDF. I have the Abobe Acrobat Xl Pro and used to have this option until I had to create a new subscription. What do I need to do in order to have this option? I use windows 7
If you are New to Mac... you may also find these links of Value
Mac 101
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/ Switching from PC
MBP Support
http://www.apple.com/support/macbookpro
Cheers, -
I have a new mac pro and can't get a side scroll bar. What can I do to get this?
I have a new mac pro and can't get a side scroll bar. How can I get this?
The scroll bar is now set to appear automatically when you start scrolling with a trackpad or scroll wheel mouse. If you are using an mouse without a scrolling device, you should change a setting.
In System Preferences, click General, and in the Show Scroll Bars section, click the option for how you want it to work. If you want to see them all the time click "Always." -
Unfortunately I had Install My Mac os x 5 times on my new macbook pro and now....
Hello! Guy's,
Unfortunately I had Install My Mac os x 5 times on my new macbook pro and now.... My MacBook Pro Is Getting slower ... Please help me...!!
I think I'm doing any mistake... I am sure am installing my mac properly but .... Should we have to install any patch after installing mac os x..??? Please help.... My mac is getting slower and slower...!!!! And I'm Also getting problem in connecting to network... I am using wi-fi ..!! and sometime my network get disconnect .... Please help..!!!!@Carolyn Samit
Mate Actually...!!! I had Heard that We Can Intall Windows 7 On These New macBook pro ...!! nd Because Of Installing Windows 7, I had Installed Mac os X Again An Again..!!! And Now ..!!! Everything Is getting Slower And Slower... What to Do..!! now I Never going 2 install .. Windows 7 on my macbook pro...!!! but for now.. Please Help me... Please.... I want that incense speed Back..!!!! Please help..>!!!!
Thanks In Advance
Sanchit Shokeen -
I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?
download the installation files and install using your serial number or adobe id,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
My 5yr old iMac will not connect to the Internet. All other computers at home will, including my Mac Pro and iPad. I'm at my wits end. What should I do?
Which OS are you using (update your user profile).Try a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset. -
I have a music library on an iMac and I got a new iPhone and a new MacBook Pro and I want some of the songs from the iMac library to be on my phone and my MacBook Pro and I have a new Apple ID on my phone and my Mac book pro, is this possible if so how do I do it?
Providing specifics on all the ways to do this will take more time than I am willing to spend here these days. You can do some of this with Home Sharing. You can transfer the entire library from one computer to another, If you do that you can delete what you don't want from the transferred library.
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to select a library, then guide it to the 'iTunes Library.itl' file in the moved iTunes folder. If you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
You do not want to use a new AppleID. Change the AppleID on the new phone to the old ID. Purchases made with one AppleID cannot be transferred to a different one and it will be a royal pain to manage two Apple IDs.
Change iTunes Store account on an iOS device - Log out of your current account with Settings.app > Store (Settings > iTunes & App Stores on iOS 6) > tap on your AppleID. Log in with a different account. Note, turning on automatic downloads or re-download past purchases may tie the device to that account for 90 days - http://support.apple.com/kb/HT4627 https://discussions.apple.com/message/18484935 - "In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account") When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again."
Maybe you are looking for
-
Schedule line blocked for delivery
Hi Friends, Can you please tell what does Schedule line blocked for delivery ( LIFSP ) means?can you please explain the business process involved in this? Regards. Dinesh
-
Hi, I am unfamiliar to OIM and I have the task of installing and using OIM 9.1.0.2 (and not the latest version). I am preparing a compatibility matrix for our setup. Questions : 1) Its my understanding that OIM comes bundled with Oracle Fusion. Which
-
Problem connecting to Data/Service outside web root
I'm new to Flash Builder (4.5). I work in an environment where developers have full access to a specified folder and subfolders on a Windows box running IIS 7 and ColdFusion 9. So the path to the services-config.xml looks like this (server and folder
-
Basic n-Tier development question
Greetings, I have a project that had a datasource in it. Everything works fine. However, I need to create 2 different UIs - client and Web. So I created a project (MyDataProj) with a datasource that gets the data. I then created a new solution (for t
-
Execute loop for alternate trigger
Hello: I have an existing code (screen shot attached) where I need to make some modifications. In the timed loop, currently the case structure is executed every time a external trial( Trigger In) is sent in. Instead, I want the loop to execute for ev