I have I pod shuffle but it is just displaying White with a tick in the centre and says ok to disconnect but I can't get anything to work eg menu etc

I have I pod shuffle but is displaying a White blank with a tick in the centre below it says ok to disconnect but unable to move from this page

This is an iPod shuffle...? A shuffle has no screen, so your problem description does not make sense. Your profile says "iPod nano," so is this question about an iPod nano? If so, have you tried doing a Reset?
http://support.apple.com/kb/HT1320

Similar Messages

Others have succeeded at this but I can't get it ro work...

Trying to incorporate tinyMCE into Flex 3 I have added the following section
to my applications html file:

<script type="text/javascript" src="C:\Users\Scott\Downloads\tinyMCE Install\jscripts\tiny_mce\tiny_mce.js"></script>
<script type="text/javascript">
tinyMCE.init({
    mode : "textareas"
Is this correct?
Nothing happens when the button that starts the tinyMCE editor is pressed:
        <mx:VBox height="69" width="696" id="vbox_MethodEdit">
            <mx:Button label="Zubereitung" click="PrepEdit(event)"/>
            <mx:TextArea height="37" width="689" id="taZubereitung"/>
        </mx:VBox>
Her's the eventhandler:
            // Handles the editing of the preparation section by calling tinyMCE
            private function PrepEdit(event:MouseEvent):void {
               //Alert.show("PrepEdit: entry point");
               var s:String;
               if (ExternalInterface.available) {
                  Alert.show("Wrapper available")
                  //var wrapperFunction:String = "changeDocumentTitle";
                  //s = ExternalInterface.call(wrapperFunction,ti1.text);
                  s = flash.external.ExternalInterface.call("tinyMCE.init");
                  //s = ExternalInterface.call("tinyMCE.init");
               } else {
                  s = "Wrapper not available";
                  //Alert.show("Wrapper not available")
            // PrepEdit
As you can see I have been doing alot of experimenting around but the editor
does not start. Alert.show("Wrapper available") executes and then all is
still.
Alot of people have entered posts about how easy all of this is to accomplish
but I can't find a single example of exactly how to do it.
Can anyone help?
Thanks,
Scott

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

Have an airplay enabled AV Receiver - how do i set up Airplay I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the

have an airplay enabled AV Receiver - how do i set up Airplay
I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
Do I need Apple TV or to change some settings somewhere?
Any help would be greatly appreciated

You are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
About AirPlay Mirroring in OS X Mountain Lion:
http://support.apple.com/kb/HT5404
iOS: Recommended settings for Wi-Fi routers and access points:
http://support.apple.com/kb/HT4199
Troubleshooting AirPlay and AirPlay Mirroring:
http://support.apple.com/kb/TS4215
Good luck in setting up 802.11 wirelesss network.

I have synced my ipod many times, but for some reason it will no longer sync the apps, and says there are app installed that can not be determined. What should I do?

I have synced my ipod many times, but for some reason it will no longer sync the apps, and says there are apps installed that can not be determined. What should I do?

See these previous discussions:
not determined
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

HT201335 I have a MacBook Air that was bought April 5, 2011. It seems it should be supported for Airplay mirroring but I can't get it to work and I do not have the icon on my bar. Any suggestions?

I have a MacBook Air that was bought April 5, 2011. It seems it should be supported for Airplay mirroring but I can't get it to work and I do not have the icon on my bar. Any suggestions?

Welcome to the Apple community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.

HT5621 I have changed my AppleID but I can't get the "system preferrences" to show my new AppleID. What am I doing wrong?

I have changed my AppleID but I can't get the "system preferrences" to show my new AppleID. What am I doing wrong? I am running 10.9.2. I support multiple devices on this icloud account and they all work fine. Its just the mac mini ...

I found a post with the answer. Basically I just logged out of the iCloud. My concern was that I would loose my contacts. But when i logged back in with the correct AppleID -- it was all there.
Thanks!

Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blue yonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's

Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blueyonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's

And, you are sure you have provided the correct username and password for you email account? I'm not familiar with Virgin media, so you might contact their tech support to find out why you are having a problem sending mail but none receiving mail. I assume your mail account has always been POP3 and not IMAP. Typically, the outgoing mail servers are not the same for the different types of account service.

I have a network connection but I can't get email or a webpage?

I have a network connection but I can't get email or a webpage?

Phone and messages is a carrier issue. Sprint needs to check your account to make sure it is set up correctly. If everything looks good on their end, then do a reset on the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, try it.

My 3gs won't take pics. It says it's full and to delete pics/vids, but I only have 30 pics and I've had tripple that plus vids and it took pics fine. How can I get my camera working again?

My 3gs won't take pics. It says it's full and to delete pics/vids, but I only have 30 pics and I've had tripple that plus vids and it took pics fine. How can I get my camera working again?

The number of pictures/videos on the device is irrelevant. If there is not available space on the device, there is no way to take pictures. Pictures, videos, music, iBooks, and any other media share the same space.
Might be a good idea to manage the content on the device going forward so that there is always space available.
Try not to fall into the misconception that many others experience, believing that the iPhone is a storage device, it simply is not. Instead it is intended to be a mirror of the content on the computer.

My ipad and iPhone have different email addresses in the FaceTime field but I can only get FaceTime to work on my iPhone, how can I get them both working on facebook

My ipad has a different email address than my iPhone, both are mine but I can only get FaceTime to work on my iPhone but seem unable to change the email address in that field

If the basics (restart, reset, restore from backup, restore as new) don't work, you'll need to bring the phone to Apple for evaluation

Making a join seems simple but I can't get it to work

Hi All,
I have 2 tables LUGallery and LUSubGallery, the tables are related by the GalleyID field
LUGallery
Gallery ID
ClientID
GalleryName
5
50
Australia
8
50
Weddings
12
33
Portraits
4
33
Landscapes
LUSubGallery
SubGalleryID
GalleryID
GalleryName
67
5
NSW
68
5
QLD
69
8
Reception
70
8
Location
87
8
Ceromony
97
4
Rain Forest
What I am try to do seems simple but I can't get it to work the way I want it.
I am trying to write a query to display Galleries from the LUGallery tbl that have a Sub Gallery attached to them (ie. It's GalleryID appears in the LUSubGallery tbl)
So the query for the above example would list Australia, Weddings & Landscapes
I have tried to write code both with inner joins and nested queries but just can't get it right,
Any help would be greatly appreciated.
Thanks in advance
Kris

I just want to
display the GalleryNames from the LUGallery tbl once
Then you probably do not want include all the extra columns from the LUSubGallery table.
It returns all of the records from both tables that Have
the same GalleryID
That is the way this type of JOIN works. It will return one record for each matched GalleryID. If you only want to display the unique gallery names you can either:
1) Use an EXISTS clause. It will return the distinct records from the main gallery table IF a matching record exists in the LUSubGallery table
--- Not tested ---
SELECT LUGallery.GalleryID,
LUGallery.GalleryName
FROM    LUGallery
WHERE   EXISTS (
        SELECT *
        FROM LUSubGallery
        WHERE LUGallery.GalleryID = LUSubGallery.GalleryID
http://www.techonthenet.com/sql/exists.php
... OR ....
2) Use the DISTINCT operator to return only the unique combinations of the selected columns. Note: DISTINCT considers all columns in the SELECT list . So if you only want unique galleries, do not include the LUSubGallery columns in the SELECT list.
http://www.w3schools.com/SQl/sql_distinct.asp
Message was edited by: -==cfSearching==-

I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!

I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!

you launch QT then go to its REGISTRATION

I installed j2se 5.0, but i can't get it to work

Help! I installed j2se 5.0, but i can't get it to work.
I tried to change to change directory which is cd.. on the cmd.
i got the error message "cd.. is not recognied as internal or external command.
I will really appreciate if anybody can help me to set it up so I can compiled the code
thanks

Read this:
http://java.sun.com/docs/books/tutorial/getStarted/cupojava/win32.html

The genius bar sold me a LaCie 500 GB EHD today but I can't get it to work properly. Can I schedule another genius bar appt. to help me with this issue even though the EHD is not an Apple product?

The genius bar sold me a LaCie 500 GB EHD today but I can't get it to work properly. Can I schedule another genius bar appt. to help me with this issue even though the EHD is not an Apple product?

Yes, if you purchased it in an Apple store, they should be able to assist you. Bring your MBP with you as well as the Drive.
Ciao.

Numbers Sort function. In Numbers 09 there was 'rearrange' which worked perfectly. New Numbers 13 has Sort by column but I can't get it to work. is there a bug?

In Numbers 09 there was 'rearrange' which worked perfectly. New Numbers 13 has Sort by column but I can't get it to work. is there a bug?

Numbers '09 has a Reorganize panel and the top section of that panel is for sorting. Numbers 3 also has the ability to sort and it works. However, Numbers '09 and Numbers 3 sort differently.
In Numbers '09, if you had a formula such as =Table 1::A1 and if a sort of Table 1 moved cell A1 to A20, the formula would change to =Table 1::A20. In Numbers 3, the formula would stay =Table1::A1.

I have I pod shuffle but it is just displaying White with a tick in the centre and says ok to disconnect but I can't get anything to work eg menu etc

Similar Messages

Maybe you are looking for