I have just attempted to update my daughters iphone 4 to ois7 all I get on itunes is Restore error 3194. Help please
I have just attempted to update an iphone 4 to ois 7. All I get on itunes is restore error 3194. Can anyone explain what is going wrong with my attempt to upgrade?
Read here > http://support.apple.com/kb/ts4451
Similar Messages
-
HT4097 i cant restore and update my ipad 2 to ios 6 it says error (3194) help please
i cant restore and update my ipad 2 to ios 6 it says error (3194) help please
Check your HOSTS file and make sure you are not blocking gs.apple.com.
Try to launch https://gs.apple.com: It should open the Apple site, and not be redirected to the Cydia server.
if this redirected to cydia server then
copy hosts file from this path
C:\Windows\System32\drivers\etc\hosts
paste on desktop. open this in notepad.
add this line in the last .
#74.208.10.249 gs.apple.com
in some case this line is there without " #" sign. if this line is there then u simply put" # " at the start of this line
save this and copy this file and past into this path.
C:\Windows\System32\drivers\etc\
replace with existing . yes.
close and then start the restore process.
now this will work. Insha Allah. -
I purchased an Iphone 4 in April of 2012. I always keep it on and charge it every night. I have had some trouble turning, a couple of times, in the past. It was simply reluctant to turn on after allowing the battery to be completely expended and has behaved the same way after being manually turned off. I have again allowed the battery to completly die and turn off the phone. This time it will not turn on at all. I have tried various combinations of pressing and holding home and power to no avail. I plugged it in to the computer, but Itunes will not recognize it as my phone. Itunes is labeling it "Iphone" and has requested that I restore the phone in order to use it with Itunes. Itunes states that "has detected an Iphone in recovery mode". I, reluctantly, attempted to restore the phone. After waiting quite a while on a "software update" to download, it said preparing Iphone for restore and then said "unable to restore Iphone, unknown error - 3194". I read, online, that I needed the most recent version of itunes in order to restore. So I upgraded Itunes and restarted the compluter. On the second, and all subsequent attempts to complete the restoration, I am prompted with a message stating "unable to restore IPhone, unknown error - 1600". My computer also attempted, and I believe, successfully, installed new device driver software for iphone4 (DFU mode). Any assistance would be greatly appreciated. Also is my phone, purchased 4/12, under any service or replacement warranty. I truly feel it should be easier to turn on and I did not even want to restore the phone, I just need to use it.
Thank you,
GeoffreyI am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?
-
I have had issues with my iphone deleting emails without my consent. It seems as if it doesn't want to hold onto emails for an extended amount of time. I use my iphone for all work related emails and personal. I have created folders to store important emails in related to work. I found when I need to retrieve those emails, they simply are not there. I was told to delete the email account from my iphone, then to add it back into phone. I have done this and things seem fine, then after a few days it no longer works. I have researched this topic and see that I am not the only one with this problem. From what I can find no one seems to have the answer. Please help?
Settings > Mail, Contacts, Calendars > Tap email account in question > nMail days to sync > extend the time
-
When i finish downloading the update it goes through a process and it comes up with a message- error 3194.
Please help me!!!!!!!!!!!!!!3194
See the actions for that error here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore -
I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions to move the .dll's to the desktop, I removed iTunes via the control panel, and now I can't get past the Service 'Apple Mobile Divice failed to start. Verify that you have sufficent privilidges to start systems services. I now have no iTunes on my laptop, can't reinstall iTunes, and I am pulling my hair out because I can not figure out how to send an e-mail to Apple because I bought my iPad just over a year ago. PLEASE HELP!!!
V/r "TRACER"
CDR Harold W. "TRACER" Valentine, SC, USNSolving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back
Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
> -
Hi i have just tried to update i tunes and it has crashed and uninstalled i tunes off my laptop. I have tried to install i tunes again but it wont and comes up with error messages
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Message was edited by: turingtest2 -
Hi All, I have just applied an update to Photoshop CC and now the product won't open. I get an error message 'Photoshop.exe - Entry Point Not Found'... any suggestions?
It won't open at all... that's the problem. When I try to execute the program, I get the 'Photoshop.exe - Entry Point Not Found' error message.
-
I have just tried to update my ipod touch and the update failed but it has locked my ipod. All I get is a picture of the itunes logo and the usb lead. I am unable to get the ipod to move and I don't know what to do. I think I should be recompenced by Apple if I have to pay to get it fixed!
The logo is saying connect it to your computer with iTunes installed on the computer. I assume when yo do this that the iPod is not seen in iTunes. to make iTunes appear try:
- Resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Place the iPod in recovery mode. See:
iPhone and iPod touch: Unable to update or restore
- Place the iPod in DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If the iPod appears in iTunes restore the iPOd. If not I would make an appointment at the Genius Bar of an Apple store. -
Hi, I have just tried to update the iPhone software and it appears to be updating but the screen on my phone has had the same picture of the apple and its at the same spot of loading (about 3 quarters) for the last HOUR!! help!
oh and the device is not being recognised by itunes now either.
-
I have just tried to update the software on my iPad and it is now asking me to connect to iTunes. The last time I did this it did not tell me to do this. I'm currently travelling and do not have my MacBook with my iTunes.Can it be resolved without iTunes
I hope that you can see this response. The forum software is acting quite bizarre today.
You really do want to restore with your own computer. There is an off chance that you might be able to backup first, but I really think it is a very slight chance now since you got the connect to iTunes screen. But on the chance that when you connect, it sees the iPad and allows a backup, I would to not have you wait to use your own Mac.
If you cannot create a backup, you will lose everything that you have put on since the date to the last backup. So of your last backup was three weeks ago, you will restore the iPad to the condition that it was in three weeks ago.
If you do a lot of traveling, using iCloud for backups might be a very good idea. I use iTunes primarily and I backup my MacBook Pro with Time Capsule, but I still use iCloud as a secondary backup. I don't have enough data that I have exceeded the free 5 GB that you get with iCloud, so I do use it just in case.
I can't explain what happened with the update, I can only tell you that it does happen to other users. I have never had a problem when I updated and I having been updating over WiFi since iOS 5 came out. Taking a guess, maybe an interruption in the connection - especially of you tried updating using a hotel's WiFi network, or a power surge maybe. Whatever the cause, it is most likely a one time thing. That doesn't help your situation I know, but hopefully it won't happen again. -
I have attempted to update OS X 10.8.4 and keep getting this error message...The operation was cancelled.(3072) Anyone know why?
You're trying to update an application that's running, perhaps in another account. Make sure you quit all apps that are to be updated. If another user is logged in under Fast User Switching or Screen Sharing, he or she must do the same.
-
I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.
Disable all Firewalls & Anti-Virus software...try again.
-
I have just installed some updates and find I have lost some files Can I uninstall the updates in a system restore process?
Hi Eric you don't say how I can get rid of the updates .? The files I lost were all pictures I think mostly JPEG
Maybe you are looking for
-
How to restrict the maximum size of a java.awt.ScrollPane
Dear all, I would like to implement a scroll pane which is resizable, but not to a size exceeding the maximum size of the java.awt.Canvas that it contains. I've sort of managed to do this by writing a subclass of java.awt.ScrollPane which implements
-
DB Dumps import/export in ODI
I have Master and Work DB dumps. Now i created two new schemas where i am importing these dumps. I created a Master rep with the new schema name and login for the same. I didnt see any topology which was there in the imported dump.Moreover when i tri
-
Anyone help with this? Am using latest Windows 8 sw
-
Mismatch between the bean code and generated code
Hello all, I am running WL7.0Sp2 on Winnt4.0Sp6 connecting to Oracle 8.17. I have been running my app on this server for a while (all my beans deployed ok, WL started up fine, no problems). From last week, all of a sudden, I am getting the error atta
-
Need help to get Oracle certificate details -
Hi, I have completed my Oracle 9i/10g/11g OCP certification on 2009. Unfortunately, I missed my all Oracle certificates two years back. Is there any way to get my certificate again as it is required for my job? Thanks & Regards,