I have just installed os7. How do I close apps when I double click on home button
I have just installed os7. How do I close apps when I double click on home button
Swipe to the app you want to close, press and hold the large image and swipe up and off the screen
Similar Messages
-
I have my iPhone locked and I don't want the music controls to pop up when I double click the home button. Does anyone know how to make it stop?
what exactly are you trying to accomplish here? i understand that you don't want to see the music status come up on your lock screen, but what are you trying to do by clicking your home button at all?
-
When I double-click the home button on my iPhone 3G-8GB, I do not get the recent apps screen. How come and how can I fix it?
Ok..Thank u for the information.. And one more question,
Is it possible to use two itunes in a same system??(bcz i had an iphone 4 with itunes in my laptop and also wish to back up this 3G with that same system) -
The app appears when I double click the homw button but has disappeared from the main screen. How do I get it back on the screen so that I don't have to double click every time?
The app appears when I double click the homw button but has disappeared from the main screen. How do I get it back on the screen so that I don't have to double click every time?
-
First time using the Apple Support Community. Trying to reset my screen so colors don't look like what can only be described as a picture negative. I recall double clicking the home button when this happened before but as that didn't work this time would be grateful for some help. Many thanks!
So when you triple tap the home button then it goes to negative colors, it is simple to go back. All you have to do is triple tab the home button again and it will go back if it doesnt then, go to Settings>General>Accessibility>And then switch off Invert Colors
-
Just installed IOS7 how do you close APPS before you power off
Thanks to everybody for their help as you can see I'm new to this just one more query how do you delete an App?
To delete an App, tap and hold an Icon until they all begin to shake. Tap the "X" in the left corner to delete the App. Tap the Home button to return to normal screen.
-
I have just installed PE13 on a new Mac. When I try to open photos it crashes. Help please.
If you haven't already done so, then try closing the Message app via the taskbar and see if it works when you re-open the app : from the iPad's home screen double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Message app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?
Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer. -
How do you close apps you hve looked at with the new software update?? You used to have to double click the home button and the apps would come up to delete bu that doesn't happen anymore.
The apps in the multitaskbar should appear like pages on the whole display. To close them, just swipe from the bottom to the top. you can select single apps for closing, when you swipe them like you would swipe your homescreens.
-
How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn-off the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign but in this version I could not do so and my iPad appears slower.
Close inactive apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen -
How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
I somehow set portrait lock on my iphone4, and then closed the app by double clicking the home button.
So now how to I access it again? Or do I have to completely restore my ph to factory settings?Double click the home button again, slide to the left and tap the screen lock button.
-
I just updated my phone and can not close the running apps. Battery dying fast. I did try double clicking the home button but swiping up did not work??
With iOS 7, swiping the application thumbnail up the screen does close the app.
-
BEfore updating my iPhone 4S, I could double click the home button and delete all of the previously opened apps. After updating, I am not able to figure out how to do this. Can someone tell me how to do this? Thank you.
After you double click the home button you swipe up on the app screenshot.
-
After installing 8.2 on my iPad (2nd gen) all the apps crash during use. It appears that the iPad saves a version of what I was using because after the app crashes I double press the home button an there is a screen of an older version of the page I was using. I swipe it away and start over, only to have the same thing happen again. I have reinstalled all the apps, rebooted, synced and re-synced with iTunes. This is VERY irritating!
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...
Maybe you are looking for
-
The old win 7 x64 on a mac pro 1.1 issue - ISO file unreadable/corrupt
Hi all, Trying to install win 7 x 64 on my mac pro 2,66 xeon 1.1. I knew beforehand there were issues, so I had prepared for them with the instructions given by flickguy here: http://discussions.apple.com/thread.jspa?threadID=2207855 thing is, the re
-
Acrobat 9's PDF Printer prints pages individually (W7x64)
Hello, I have a user that tries to print a document using Acrobat 9's PDF Printer. Despite specifying to print the whole document, the printer prompts a save location for each page of the document. This is done from Excel 2010 Pro Plus with the OS Wi
-
Lightroom 2 and PS Elements 11 on macbook
Can anyine help I have moved from PC to macbook pro I have installed lightroom 2 - working OK I have installed Photochop Elements 11 - working OK all working as it should except the interface between the two Lightroom did not recognise PS elements as
-
How do I connect and detect a high frquency pulse (0-3500hz) with a variable pulse voltage (0v low,5-10v high), on a SC-2345 connected to a PCI-6224? Labview doesn't generate a waveform if I try to graph the signal, and my analog input doesn'y reco
-
Hi, I am trying to propagate Custom principal from thick client to WLS server 8.1 sp3. I use Authenticate.authenticate() at client side login module (jar at client side is weblogi.jar; i have my own Authentication provider at the server domain) and e