I have lost the automatic date/time stamp

I have lost the automatic date/time stamp when a form is submitted on my response page. How do I make it start doing it again? The column just appears blank now with new submissions.

In the first cell of the column you need to re-enter the formula that used to be there. Enter "= LOCALTIME(ROWCREATEDATE()". You may need to change the date format after this. Click on the Table button in the toolbar, select the Column with the dates, then select your prefered format.
-Jeff

Similar Messages

Automatic date/time stamp a document

Is there a way to automatically insert a date/time on a document? I have a program that allows me to alter pdf documents and I need to be able to enter the date and time. Blackberry allowed me to type "dt" and it would automatically enter it for me. Does Apple have a feature similar?

I have looked at that but haven't been able to figure out how to use or edit the stamp. Is there a place
to set up time/date stamping, or maybe it's to be done manually? In either case, I haven't been able to figure how to do a stamp that is anything other than the stock stamp.

How to insert automatic Date/Time Stamp on filename?!

I have a simple chart that I fill out for work hours and whatnot every day with the Numbers program.
I would love to have the date inserted into the filename automatically so that I don't have to manually enter it every day when I save.
Is this possible?

--
--[SCRIPT savewith_date_timestamp]
Enregistrer le script en tant que Script : savewith_date_timestamp.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Aller au menu Scripts , choisir Numbers puis choisir savewith_date_timestamp
Le script enregistre les documents Numbers ouverts ayant été modifiés.
Il crée également une copie dont le nom inclut la date et l'heure.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
Sous 10.6.x,
aller dans le panneau "Général" du dialogue Préférences de l'Éditeur Applescript
puis cocher la case "Afficher le menu des scripts dans la barre des menus".
--=====
Save the script as a Script: savewith_date_timestamp.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Go to the Scripts Menu, choose Numbers, then choose "savewith_date_timestamp"
The script save open and modified Numbers documents.
It create duplicates with date_time stamp appended to the file names.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2010/11/11
--=====
on run
-- my savemodifieddocuments("Pages")
-- my savemodifieddocuments("Keynote")
my savemodifieddocuments("Numbers")
end run
--=====
on savemodifieddocuments(theApp)
local titres, aDoc
tell application "System Events" to set titres to title of processes
if theApp is in titres then
tell application theApp
repeat with aDoc in every document
if modified of aDoc then
save aDoc
tell application "System Events" to my duplicatewith_date_timestamp(path of disk item (path of aDoc))
end if
end repeat
end tell
end if
end savemodifieddocuments
--=====
on duplicatewith_date_timestamp(fichier) (* fichier is an HFS path*)
local Nom, ext, dossier, nomZip, source, dest
tell application "System Events" to tell disk item ("" & fichier)
set Nom to name
set ext to name extension
set dossier to path of container
end tell
set source to quoted form of POSIX path of (fichier)
set Nom to text 1 thru -(2 + (count of ext)) of Nom
set nomZip to Nom & (do shell script "date +_%Y%m%d-%H%M%S") & "." & ext
set dest to quoted form of POSIX path of (dossier & nomZip)
do shell script "ditto " & source & " " & dest
end duplicatewith_date_timestamp
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France) jeudi 11 novembre 2010 10:37:19

Generating Date Time Stamped Excel Sheet

Hi
I am working on Data Logging project and requirement is to log data data to excel sheet at one per second. Moreover the name of excel sheet should be automatic date time stamp generated. Can anybody help me in generating datetime stamp file name for this file which I have downloaded from ni website.
Thanks
Solved!
Go to Solution.
Attachments:
continuouswritespead.vi ‏26 KB

Your program does not create an Excel File. It creates a text file that Excel is able to open up and import.
As it is right now, the name of the file you create is determined by a dialog box that pops up with the old version of the Open/Create/Replace file that you have. If you want the program to determine the file name, you need to build a file path out of string data in the same manner you are using the string coming from the Get Date/Time String function you have inside the loop.
Message Edited by Ravens Fan on 04-25-2010 02:59 PM

PTP camera - how to retain date/time stamp on photos [Gnome]

I have a USB PTP Camera that comes up in Nautilus under "gphoto2://[usb:001,007]/DCIM" I can copy/paste the photos off the thing to ~ but the date/time stamp gets changed to the present. How can I copy them over retaining the original date/time stamp?

By using the exif info I suppose.
http://linux.die.net/man/1/exiv2
-t
Set the file timestamp according to the Exif create timestamp in addition to renaming the file (overrides -k). This option is only used with the 'rename' action.
Last edited by karol (2010-07-22 22:13:26)

Retaining AVI date/time stamp during capture to pre 9.

I have pre 9. When capturing DV from my camcorder, how do I get pre 9 to add the clips time and date to the avi file properties like it does for jpg's. What I get is the date I captured it to the computer. If I add "date taken" to the properties shown, it remains blank.
I realize the time/frame stamp changes throughout the clip but it should be able to show the initial date/time stamp, for example. I sort these travel clips by oldest date first and need to be able to match them to their itinerary locations. I have a small freeware app that will strip the date/time stamp from the meta data and then I can adjust the time/date in "Organizer" but I have 100's of clips so I'd rather not go that way. I know there app's that will encode the date/time stamp visibly on the image during capture but I don't want that as I make DVD's from the clips. Do you have any advice or suggestions? I have Win 7, 64 bit, 3.2 ghz, 2 core. Thanks, Rob.

Premiere Elements won't do this.
You'll need a third-party program called DV Date, downloadable from the web.

Error messages when sending date-time stamp to Oracle Database

I have a complex application that communicates with an Oracle database. One of the table values that gets written to the table is a date-time stamp. Until recently, the user only required a date, and this was never an error. (The format String used was %d-%b-%Y) Now they need a time-stamp as well, so I attempted to edit the format string input of the format date/time string function to include the time. I have tried numerous format strings, each of which returns an error on execution. Depending on which format I use, I get one of 3 different error messages. The really odd thing is that both the date and time always get stored in Oracle without any problem (regardless of what date-time I use, as long as I include the date and any part of a time stamp - I get the entire timestamp even if I only include %I for the hour). The only issue is that LabVIEW generates an ODBC error if I try to include the time to the date-time stamp. In other words, teh date/time stamp writes to the Oracle database, but an ODBC error occurs every time. I've included a word doc with screen captures of the format strings used, the resultant date/time stamps written to Oracle and the error messages generated within LabVIEW. Any advice would be most appreciated.
Attachments:
Summary of ODBC Error messages related to date-time stamp.doc ‏65 KB

Oracle has a standard date format: 12-Mar-2009 that it accepts as a string, but if you want more than that, you need to use the todate() function. I used this string going into the standard LabVIEW ''Format date/time sting vi'
to_date('%d-%b-%Y %H:%M:%S', 'DD-MON-YYYY HH24:MIS') to create the value needed for Oracle.
Then I use standard format string to create SQL: insert into mytable (mydate) values(%s) and select * from my table where mydate = %s using the string above for %s.
I think you can also define a global format for all time strings but I haven't bothered figuring that out.

Automatic Date & Time

Somehow the Automatic date & time, and the Automatic time zone settings get themselves unchecked. I don't know how it happens, but it's happened three times in the past month. Is there some way to lock them, and perhaps other settings as well, so they can't be changed? Or is access to all settings on the LG G2 wide open all the time?

Thank you for the quick response! I have never backed up the phone nor restored to factory data reset. It's a new device. I've had it for about a month. I am the only user of this phone. There are no kids in the house.
I suspect what's happening is that it is very easy to get to the settings page from the front panel, and that if the I put the phone in my pants pocket, it doesn't take much to get into settings mode and from there to the date settings and from there turning off those automatic time/date settings. I've notice other settings get turned off as well, so it's not just the date and timezone. If there was some way to make it harder to get to the settings page, that would help a lot. Maybe if that link were hidden, or just not on the front panel?
The first time this happened I was on a trip to a different time zone. I set the alarm clock to wake me up for the flight back home, and when did went off it was 32 minutes late. The next time it happened I had set an alarm clock for a morning business meeting and it got me there an hour early. And then it happened again this week but now I check the time every night, so I caught it.
I was using a blackberry for years before this phone, and they made the settings pages well hidden. So I was hoping there was a way they could be hidden better on this phone.

I have lost my calendar data and am having a hard time retrieving it from Time Capsule. Can anyone help? I am using Mountain lion OS

I have lost my iCal data and am having a hard time retrieving it from Time Capsule. I am using Mountain Lion OS om iMac. Can anyone help?

You cannot see it because it is hidden.. one of those great things apple does.. if it is hidden in your Mac then it will be hidden in the Time Machine Backup.
You will need to restore the entire folder to a different location.. and unhide it.
There is some info here about restoring particular files or folders.
http://pondini.org/TM/16.html
And some info from Lion which should also relate to Mountain Lion.
https://discussions.apple.com/thread/3231381?start=0&tstart=0
There is stuff about recovery near the end.
One wonders sometimes when Apple make these decisions if they ever think about what happens when something goes wrong. Hiding files..???

TS4605 Hi, I was working in WORD on a file containing huge data. My machine just hung up one day while working and now I seem to have lost the file how do I get it back. Please HELP me.

Hi, I was working in WORD on a file containing huge data. My machine just hung up one day while working and now I seem to have lost the file how do I get it back. Please HELP me.

Well, iCloud has nothing to do with this.
Do you have the built-in backup function Time Machine running on your Mac?
See: http://support.apple.com/kb/ht1427

How do you vary the Date/Time stamp format in File Adapters

In the receiver channel of the File Adapter where you specify the 'File Name Scheme', you do have the option of specifying a 'File Construction Mode' of 'Add Time Stamp'. How can you specify a different Date/Time stamp format ( eg MM/DD/YY vs YYYYMMDD vs MMDDYY, etc. ) without changing the Date/Time stamp for the entire SAP system? Also, can you control where the Date/Time stamp appears in the filename?

Hi,
There are many threads discussing the same issue. Go thro the following:
Dynamic file name (Date) in Receiver File Adapter
Receiver File Adapter - TimeStamp
Bhavesh's reply in above thread:
You can use Adapter Specific Identifiers and then change the file name in the mapping. Append the tiem stamp in the format that you want and so on.
Just use this code in an UDF,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String SourceFileName = conf.get(key);
java.text.SimpleDateFormat dateformat = new java.text.SimpleDateFormat( "yyyyMMdd" );
dateformat.format( new java.util.Date() );
String newfilename=SourceFileName+dateformat;
// change to new file name
conf.put(key, newfilename);
return "";
Regards,
P.Venkat

HT4946 I want to sync my iPad with an older backup, not the old created when I plug mt device in. Following a problem with my iPad I have lost all my data from a game app and I am trying to retrieve it

Following a problem with my IPad and restoring it, I have lost the data in one of my game Apps ... I can see in ITunes/ pref my iPad back ups and want to try to sync with an older back up to get the data back. So how can I sync with an oldera back up?

In that same window - the one where you see your backups - click on the box at the bottom that say -Prevent iPods, iPhones and iPads form syncing automatically. Then click OK and quit iTunes.
Connect your iPad to the computer and launch iTunes. Right click on the iPad name on the left side under the devices heading and select - Restore from backup. A window will pop up from which you can select any of the backups that you have for the iPad. Select the backup that you want to restore from and then go agreed and restore the iPad. Sync with iTunes when you are done.
Remember that when you restore from a backup - you restore everything in that backup to the iPad. You cannot selectively restore content. It is all or none.

How do you remove the date/time stamp from a photo before printing?

I have one group of photos in an event that have the date and time stamp on them. I don't know how to remove the date/time stamp before printing.

If you have your camera set to imprint the date/time on the photo you can not "remove it - it is a part of the photo - depending on the surounding photo you might be able to retouch it out
LN

Save the file and give date & time stamp

1. Reading the Excel file from the selection screen as a parameter.
2. Using F.M. ALSM_EXCEL_TO_INTERNAL_TABLE reading Excel file into
    Internal table.
3. Implementing the Business Logic.
4. Move output to Final Internal table.
5. Final internal table should generate a Flat file. By using GUI_DOWNLOAD.
6. That flat file should be saved with the name and location given in the Excel.
7. When ever I run the program output file will generate in the same location but with date and time stamp. Because Im running the program for range of employees say initially I run for 1 10,000 employees next 10,001- 20,000 like that.
Whenever I run for 2nd time it will overwrite the previous output, thats the reason Im using date and time stamp.
Eg:
PERSONAL Numbers              Name                                         Location
00000001                 xxxxx-24.04.2007-10.30          C:\
00000002                 xxxxx-24.04.2007-10.35
00000003                 xxxxx-25.04.2007-10.40
00000004                                  xxxxx-25.04.2007-10.30
Can any one help me how to save the file and give date & time stamp through hardcode?
please help me in this issue.

I am not clear with your problem. Based on the understanding of your question,
there can be two cases.
1- U want to insert time stamp in the output file.
2- Time stamp is already there, u just have to solve the overwriting issue.
If your question goes with option 2, You can make use of import parameters
<b>CONFIRM_OVERWRITE</b> : Which will ask for confirmation before overwriting.
<b>APPEND</b> : which you can choose either to append the data to the existing file or overwrite it.
Please inform if the issue is not resolved.
Message was edited by:
        BINU RAJ BINU

Adding the date/time stamp to videos already created

We have someone using Elemets 8
They need to add in the date/time stamp to video's that are already created.
The camcorder we have does record this information but doesn't allow that information to be put onto the screen its a Canon HD HF200
We were told by Adobe support we can do this but they wanted $39 plus $39 an hour.
Anyone out there able to tell me how we can get this done for free?

Try the Premier Elements forum for video questions. You will get better advice over there. Good luck.
http://forums.adobe.com/community/premiere_elements

I have lost the automatic date/time stamp

Similar Messages

Maybe you are looking for