I have MacBook Pro bought 2011. After downloading update for Canon digital camera, computer screen is flickering (like curtain moving in breeze) when scrolling on all websites (slightly less with Safari )

I downloaded from Canon website an update to my Canon 750 IXUS digital camera. It downloaded various software products onto my computer which are outlined in the computer's database of software applications. From that time, this flickering effect occurs when scrolling through all pages using Firefox and to a lesser extent on Safari. It is like the effect of someone blinking rapidly and constantly and looking at the screen. When not scrolling there is no such effect. It is very disruptive when trying to read a page.

Similar Messages

I have a MacBook Pro bought in dec 2009. Currently has mountain lion osx installed. Worked like a dream until today. Randomly froze, so I restarted it. To find I got a grey screen. It wouldn't start. Also note my DVD drive doesn't work, but mountain lion

I have a MacBook Pro bought in dec 2009. Currently has mountain lion osx installed. Worked like a dream until today. Randomly froze, so I restarted it. To find I got a grey screen. It wouldn't start. Also note my DVD drive doesn't work, but mountain lion was installed via App Store anyway.
So here's what I done so far:
tried resetting PRAM - No success
Done disk utility. Disk verified with no errors. I even re formatted disk. - no success starting.
Tried re installing mountain lion via download . It froze halfway installing -no success.
Tried backing up a time machine backup from my USB hard drive. It froze at 1% - no success
Tried booting from safe mode - no success
Tried the command line boot - no success.
Please someone help!

Sounds like the hard dre has left the building, Died, in the Sh*tter, Gone to the hard drive resting place in the sky.
Buy a new drive connect it to the system with a SATA to USB adapter and see if you can install Mt Lion on that drive connected externally. If you can then the drive inside your system has failed.
Oh Wait!!!! You have the 2009 model. They are known for bad drive to logic board cables. So it may not be the drive itself but the cable going from the drive to the logic board. Do the same as above then if the system runs OK with the new drive connected externally install it in the system and see if it boots. If it does you are good to go. If it doesn't then it is more then likely the cable that hs failed.
I would suggest you also SAVE a copy of that download of Mt Lion and create a USB install drive from it using Lion Disk Maker, once you get your system up and running.

I have MacBook Pro (early 2011) with Mac OS X 10.6.8. How to make Cannon MF 5770 printing? I know that Canon have not provided drivers. Is it any way around it?

I have MacBook Pro (early 2011) with Mac OS X 10.6.8. How to make Cannon MF 5770 printing? I know that Canon have not provided drivers. Is it any way around it?

Updated printer drivers.
http://support.apple.com/kb/DL899

After downloading updates for the first time, i was asked to restart my mac. it starting writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success.

after downloading updates for the first time, i was asked to restart my mac. it started writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success. it has not updated my mac OS X 10.5.

My clean install worked out alright, although I don't think it really fixed anything, rather gave me a couple more days of use 'till I have to send it in. Someone please help my get it running properly again...

My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion

My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion... Help!!!
Several problems with Mountain Lion, APP STORE (login/logout error), WIFI(802.11n for 802.11g), MAIL (horrible)... Apple, what is happening?

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Have macbook pro early 2011, blank hard drive (new), no install DVD, inadequate internet connection. How do I install an OS in the thing ?

Have macbook pro 15" early 2011, blank hard drive (new), Install DVD not available and an inadequate internet connection.
How do I install an OS in the thing ?
Can I purchase an installation disk? (I think it originally shipped with snow leopard 10.6.6)
My first time with Macs and I would love to get it going.
Thanks....

You can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers.
You can upgrade the firmware to enable Network Restore: Computers that can be upgraded to use OS X Internet Recovery. After upgrading you can do the following:
Install OS X Using Internet Recovery
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

What is the problem with 15-inch Macbook Pro model 2011 after connecting to TV with HDMI chord?

Today we connected a 15-inch Macbook Pro model 2011 with HDMI chord to an Insigna Television. We plugged and unplugged couple of times. But recently the macbook pro is having technical issues. The following symptoms are:
1. Macbook pro turns on and off
2. The screen stays blue and keeps loading but does not load to the desktop so you can't access to anywhere
3. The screen sometimes becomes fuzzy and the apple logo that shows before it loads to the desktop is fuzzy
4. Sometimes fuzzy lines appear on the screen like you see on television when there's a bad signal
5. The screen stays blue
6. Sometimes little specks appear on the screen
Only thing we did was turn it off and restart but it still leads to the same symptoms above.
Does anyone have any clue what caused this problem? I am guessing it is due to the connection to the HDMI chord, since we didn't turn the macbook on and off when we plugged it, rather we just unplugged and plugged the chord while the macbook is running.
Another theory might be watching movies from an online source but the first theory seems to make more sense.
We scheduled a meeting with the genius bar tomorrow but does anyone might have any clue? And also any ideas how to fix this? This is an emergency because there are important files on the macbook we didn't back up and we hope the files are safe and we need to use the macbook ASAP. Let us know anything that might have caused this and/or any solutions or help. That would be appreciated and thank you.

Hey there! Welcome to the Discrete GPU issue clube ... post your relate here >>> 2011 MacBook Pro and Discrete Graphics Card
And for GOD SAKE! Call Apple to tell them that you're another user with such problem ... that action can improve a future recall. BTW the fix price for your problem is around U$ 1000,00 ... that's the meaning of the recall attempt

MacBook Pro 2009 problems after latest update. Anyone else got the same issues?

Hey community:)
A couple of nights ago I decided to update my MacBook Pro to the latest version/update. It all went fine, I installed them, rebooted it and logged into my account as usual.
Then it all started, my finder/spotlight slowed down by atleast 50%, my videofiles both .mkv and .avi started acting funny on searching and playing generally.
I then decided to go surf some on the web(safari), it went fine for the first minute. After that it didn't work at all, pages wouldn't start loading at all, and I had to quit the Safari.app and reboot it to even get the thing to work.
Is there anything I can do about this, or to rephrase: is there anyone else with the same issues?

Let's see, starting at the first reply
@sig
"I updated it to the latest update" as in taking the updates that was given. I'll "explain" some more: The macbook in question didn't have any new updates in atleast the last 1,5 months, as I've been working 14h++ a day with the same things and didn't really have the time to update before the 22.March. Sorry for not stating the obvious before now, but got kinda frustrated and didn't really think thorough the question, but I'm going to try give the most information I can possibly find!
I installed these updates 22. march:
iTunes(10.2.1)
Mac OS X Update Combined(10.6.7)
iWeb Update(3.0.3)
AirPort Utility(5.5.2)
After that update my video playback started getting harder and harder, I could watch .mkv files but I'd get more and more errors or even playback stops. The macbooks performance in finder did also start slowing down.
The following updates was installed 2 June:
Safari(5.0.5)
iTunes(10.2.2)
Snow Leopard Font Update(1.0)
Security Update 2011-002(1.0)
Java for Mac Os X 10.6 Update 4(1.0)
iDVD 7.1.1 Update(7.1.1)
ProKit Update(7.0)
Security Update 2011-003(installed today, 1 day after the problem started fyi)
after that update my safari stopped working properly and my playback of videos got even worse than they got after my updates the 22. March. Included with these things my finder/spotlight started getting slower and slower, until it got to where it is now with files loading atleast 50% slower than before.
@ Baby Boomer (USofA)
I did not use the repair permissions before 3. June(fter the latest security update)
I simply installed the updates and got prompted with the restart from the updates, followed it and then logged in after the updates was finished with the configuring.
I have now repaired and verified the permissions, and can't seem to find any difference in the performance of my macbook.
@ both sig and Baby Boomer (USofA)
Thanks for the help so far, hope I can find a solution to this without having to format and reinstall everything again

HT6150 Single press of Power Button does not put my MacBook Pro to sleep after this update! Do I need to change anything in the settings? Any help please? Thank you!

The title says it all! After installing the new Mavericks update, I cannot put my MacBook Pro to sleep after a single press of the Power Button like before. Does it have something to do with this update or my MacBook Pro? Or do I have to change something in Settings?
Any help would be appreciated.
Thanks!

Send your opinion to Apple.
But remember that there are others.
A moment is a medieval unit of time equal to 1.5 minutes or 1/40 of an hour. This reckoning is derived from the work of Bartholomeus Anglicus, writing in 1240 that each hour was divided into four points, each point into ten moments, each moment into twelve ounces, and each ounce into 47 atoms.
In modern English it usually refers to "a short period of time",[2] the exact length remaining ambiguous.

I have a macbook pro and I want to use my canon digital video camera on yahoo chat. When I sign on to chat and attempt to use a camera, the system automatically defaults to the built in camera on the notebook. Can I override that default?

I have a macbook pro and I want to use my canon firewire digital video camera on yahoo chat. When I sign on to chat and attempt to use a camera, the system automatically defaults to the built in camera on the notebook. Can I override that default?

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

Please help have macbook pro late 2011 purchased second hand lion was already the OX I wanted to install mavericks my mac came up with a four digit pin number went to geek squad they wiped my hard drive now there is know OX on my mac those geeksquad guy s

hello anyone i have a late 2011 macbook pro that i purchsed second hand it already had lion installed i wanted to install mavericks which I tried a four digit pin code came up thus locking my mac I took it to the geeksquad they wiped my harddrive and tried to renstall the OX they said they could not do it because a firmware passcode or filevault passcode was on it so I now have a brick can anyone help me fix this problem thanks for any info

Pawn shop! They only looked after it for a stranger then the ticket ran out. Will apple accept that sell-on as a bill of sale? I'll give you 50:50 chance on that. Did you see Apple recently refused to unlock an ipad left to a guy by his mother who died of cancer. Apple wanted a court order! (Til it got on the national TV news).
Someone will have to produce the original owner's bill of sale I reckon.

Can't install mavericks on 10.6.8. I have Macbook pro from 2011.

Trying to install Mavericks with snow leopard 10.6.8. I checked and my Mac Book Pro from 2011 has enough memory and fits all requirements for being able to install Mavericks. I get half way through download and then every time it says error downloading and stops downloading.

See Eric Root's suggestions here: Re: can't update to mavericks on early 09 iMac

Macbook pro not booting after software update

Dear all,
Since two days ago my macbook pro hangs at the gray apple screen, the round circle keeps on turning. Kept it running for nights but it does not exit this status. I read on the internet that I could run it in verbose mode, that's what I did, see screenshot below. What do you recommend? This seems to be a hard disk issue. How can I boot up in safe mode and possibly recover the hard disk data? Any other recommendations?
Thanks,

Get your Mac to a Computer repair service, or do it yourself. You will need to put it in an external SATA reader, like I did. I recovered files via an older mac running Slow Leopard and copied files to it.
What I did:
1. You will have to remove the screws at the bottom of your Mac, in order to get to the HDD (or SSD, whatever you have).
2. You need to remove the HDD and put it in an external Case/SATA reader
3. Copy files from your HDD to another Mac
4. On that other Mac, go to Disk Utility (search in spotlight) and Erase as 'Mac OS X Extended (Journaled)'
5. Download Mountain lion on another Mac from the AppStore, and go to that Applications folder.
6. Right click on the downloaded file and select “Show Package Contents”. Go to “Contents” and jump inside the “SharedSupport” folder and you’ll find a file titled “InstallESD.dmg”. Copy this over to the desktop.
7. Plug in a USB flash drive to your Mac having at least 4GB memory. We highly suggest going ahead with an 8GB one just to be on the safe side.
8. Now open up “Disk Utility” and drag InstallESD.dmg from the desktop to the left-hand sidebar. Select the attached USB from left side and click on “Partition” tab.
9. Select “1 Partition” from the Volume Scheme dropdown menu. Choose “Mac OS Extended (Journaled)” from the left.
10. Now click on “Option” at the bottom. Select “GUID Partition Table” and press OK. Now click on Apply at the bottom right to start formatting.. (NOTE: This is will erase all data on your USB flash drive)
11. Once the drive has been formatted, click on “Restore” (it’s right next to where you clicked on “Partition in Step 5).
12. Choose USB drive you plugged-in in Step 5 as “Destination” with the InstallESD.dmg file as “Source”.
13. Click Restore and type in your password (if you have any). This will create the intended Lion bootable USB flash drive
14. Reboot your Mac with the USB drive plugged in. Hold the “Option” key on your keyboard when you hear the iconic OS X startup chime. You can now boot into your Flash drive from there.
15. Follow the on-screen instructions to install OS X , and after that, reboot
16. Format USB back to FAT in Disk Utility, copy your files from old PC to new using the USB.
That's it, you're done . Takes a lot of time, but recovered my Mac this way!

Does a MacBook Pro slow down after OS updates much like an iPhone, iPod Touch or iPad?

I have A 4th generation iPod touch that I've had for almost two years, I also have an iPhone 4s and an iPad 2. When I bought the iPod touch it ran very quick and no sluggishness now with a few iOS updates over the months it's pretty slow and sluggish. So far both my iPhone 4s and my iPad 2 are running very good. What I've heard from friends who have iPhone's 3GS or an iPad 1 is that they're both sluggish after the iOS updates over the months and years. My question is, not owning a MacBook, does this computer slow down the same way the ios devices do after months and years of OS updates? My experience with my netbook is that it's become much more stable then when i first bought it with no sluggishness what so ever over the months of updates through Microsoft updates. Thanks.
Tommy Vercetti

Any computer can be slower when running a more demanding system than it was designed for. In my general experience, though, a Mac will continue running just fine on systems two major versions after what it shipped with. (For example, a machine that shipped with Leopard (10.5) will probably be able to run Lion (10.7) just fine, provided there's enough RAM and the hard drive isn't too full.) The only time I've had major issues with sluggishness was with an old PowerBook that shipped with Mac OS 9 and that I updated eventually to Mac OS X 10.3... a total of four versions later! I probably would have been better off leaving it at 10.2, but wanted some feature in 10.3 (I forget what at this point). And it's still in a cabinet in my office, in perfect working order.
Regarding iOS, my first-generation iPod Touch, updated to the latest system it can support, still works just fine. Of course, it feels more sluggish when I do something with it because I've gotten used to expecting more from my iPhone 4 and iPad 2.
So, no, a Mac should not get sluggish over time, as long as you don't try to push it beyond it's capabilities. The only Mac I have ever felt it necessary to replace before about 5-6 years of age was the one I dropped on the floor.
Edit: Also, your comparison with Windows downloading updates is not quite the same thing as what I've said above. Upgrading a Mac from 10.6 to 10.7 is like upgrading a Windows machine from Windows Vista to Windows 7. The free incremental updates (10.7.1, 10.7.2, etc), which are more similar to automatic Windows updates, definitely should not cause sluggishness.

I have Macbook Pro on order, should I wait for new "iBook"?

I'll be using the mac for the iLife software mostly. iMovie, iPhoto and Garageband. How much do you think the price difference and speed difference will be? I'm pretty sure I'm sticking with the MacBook Pro. I've got the stock 1.83 on order, after rebates it will cost me about $1890.

If the Intel iBook (or non-"pro" MacBook) is announced at apples anouncement next week people should be able to know more specifically about how it compares and what the price should be.
Many speculate a 13" widescreen MacBook with a single intel processor will be comeing out that should be comperable in speed to the current powerbook (or faster). This is all spec but people do know its coming.
People also think it is going to be annoucned at the event and availble around april. I am keeping my MBP on order and then if something peaks my interest at the annoucement I have time to switch.
I think it depends on price and actual performance, since noone knows exactly what the new iBook is yet its hard to speculate at this time.

I have MacBook Pro bought 2011. After downloading update for Canon digital camera, computer screen is flickering (like curtain moving in breeze) when scrolling on all websites (slightly less with Safari )

Similar Messages

Maybe you are looking for