I have my MacBook model 4,1 from 2008, I'm running OS X Snow Leopard on it, and I want to know if this hardware can run with OS X Lion, Can I?

Thankyou for answers

Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

Similar Messages

  • I have a MacBook Pro (15-inch, Late 2008) and am currently running Snow Leopard 10.6.8. I would like to know which is the most stable upgrade for my model. I have read some reviews of Maverick and Yosemite making the older macs slower. Is this true?

    I have a MacBook Pro (15-inch, Late 2008), Intel Core 2 Duo 2.53 GHz, 4GB Memory. and am currently running Snow Leopard 10.6.8.
    I would like to know which is the most stable upgrade for my model? Mountain Lion, Mavericks or Yosemite?
    When I had gone to the apple care centre in India a few months ago to upgrade my OSX to Mountain Lion, I was told that considering my macbook pro's specs, upgrading it would just make it less efficient, and that I should stick to Snow Leopard unless I consider buying a newer mac that would benefit from it. Is this true? I find it a bit hard to believe. Which update is most recommended?
    I also notice that my mac has gotten considerably slower. While using chrome, it buffers and struggles with even just 5 tabs open. Could this have something to do with my current ios? As a precaution, I have always been making sure I have enough free space on disk i.e around 70 - 100 free out of 250GB.
    Any advice is appreciated.
    Thanks in advance.

    Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
    Check to make sure your applications are compatible.
    Application Compatibility
    Applications Compatibility (2)

  • I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?

    I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?
    Thank you

    So it seems from reading the COMMAND manual that my first issue is that I used a 16GB SD card, and the manual says it will only recogize up to a 2GB SD card. I did use my MB Air's SD card slot and crated a folder and dragged the music files to it, then to the card. So I am going to get a 2GB card and try that next. Otherwise just stick with the iPOD connected. At least that is 8GB

  • I have a Macbook Pro Early 2011 from the USA.  After installing Mavericks, Adobe CS6 crashes whenever it is plugged into a 27inch cinema display I purchased from the apple store in China (We moved to China). It works when not plugged into 27inch display.

    I have a Macbook Pro Early 2011 from the USA. It is now running Mavericks.  I connect it to a 27" Cinema Display that I bought in China after we moved to China.  Before I installed Mavericks, I could run all of the Adobe CS6 and Adobe CS5.5 applications on my Macbook Pro while connected to the cinema display. Now that I have Mavericks installed, whenever I am connected to my 27" CInema display my Adobe applications crash upon opening.  I know this is a rare scenario, but does anyone have any ideas how to fix this problem? Is there a new driver that needs installed?  I'd appreciate any help.

    I am also having a similar issue. I used Adobe Lightroom and my whole display goes black. Even my laptop screen and the lights on the keyboard go black. I can still hear the fan running, so I assume it is just the display. This is my first Mac and I have had nothing but issues. I think I am going back to Windows after this.

  • I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

    I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

    Most likely won't run SL unless it's one that was released before Lion went public. Color SL gone from new Macs.
    27" i7 iMac 10.6.8 , Mac OS X (10.7.2), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)

  • I just bought a macbook pro and I want to know how to restore pictures that were backed up on iCloud but then deleted from my phone. Isn't that the point of the backup so I can delete and make more space. Please help!

    I just bought a macbook pro and I want to know how to restore pictures that were backed up on iCloud but then deleted from my phone. Isn't that the point of the backup so I can delete and make more space. Please help!

    Log into the iCloud on your MacBook Pro and enable Photo Stream:
    Then launch iPhoto and set iPhoto's Photo Stream preferences to the following:
    Then check the Photo Stream section of iPhoto:
    This is to confirm that the photos are still in Photo Stream. If they are they will be imported into the library. 
    NOTE: not all photos in an iPhone will be in the Photo Stream. PS only keeps photos in it for 30 days.
    If you have the missing photos in your library put them in an album.  Connect your iPhone to the Mac and open iTunes.  In iTunes you can select that album in the library and sync the photos to your iPhone to get them back on the iPhone.
    OT

  • OSX Lion and ICloud? - I have a macbook model identifier 1,1

    I have a macbook model identifier 1,1 accordingly even though I run SnowLeopard this won't apparently run OS Lion, iCloud is going to be free for Lion users and Mobile Me turned off where does that leave users like me?
    I was looking at buying an IMac when Lion came out thinking I would also upgrade my MacBook, but this will now mean running two different types of operating software that may not necessarily talk to each other.
    Any ideas?

    Apple - Press Info - Mac OS X Lion With 250 New Features Available in July From Mac App Store
    The Mac OS X Lion Up-To-Date upgrade is available at no additional charge via the Mac App Store to all customers who purchased a qualifying new Mac system from Apple or an Apple Authorized Reseller on or after June 6, 2011. Users must request their Up-To-Date upgrade within 30 days of purchase of their Mac computer. Customers who purchase a qualifying Mac between June 6, 2011 and the date when Lion is available in the Mac App Store will have 30 days from Lion’s official release date to make a request.

  • I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

    I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

    There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
    You can block others from using your Apple ID by changing your password.  There is no way to erase what was already downloaded on to someone else's device, for obvious reasons,

  • Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?

    Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?

    See this article.

  • I have a Macbook Model No A1181 2.4 GHz intel core 2 Duo with 4 Gb Ram. Should I be able to instal Final Cut Pro 3.0.2 cos I'm having problems?

    I have a Macbook Model No A1181 2.4 GHz intel core 2 Duo with 4 Gb Ram. Should I be able to instal Final Cut Pro 3.0.2 cos I'm having problems? As I read it My machine should be able to run the software.
    Thanks in advance

    You are trying to use software that is over 10 years old. As I read it, FCP 3.0.2 required 10.1 or higher at the time, but as FCP is reliant on quicktime, which has been updated many, many times, I doubt that you will ever get it to work properly.

  • If both you and the person you are texting have iMessage, and that person's phone is dead... Will it/Can it still be sent as an imessage? I am getting different answers from people. I want to know if this person was being untruthful about there phone bein

    If both you and the person you are texting have iMessage, and that person's phone is dead... Will it/Can it still be sent as an imessage? I am getting different answers from people. I want to know if this person was being untruthful about there phone being truthful.

    IF that is the only iDevice activated for that recipient, then no. It should not successfully send as an iMessage if the phone is powered off or has no data connection. If you have Send as SMS turned on, it should automatically fallback to SMS after a few minutes. Of course, they won't get this until they power on their phone, assuming they have a text messaging plan with their carrier.

  • HT4796 Hi, I've just bought a new Macbook Pro and started migrating from PC but the remaining time is about 70 hours long, I just wanted to know if that timing is normal and if not, does leaving running my MacBook that time can affect it?

    Hi, I've just bought a new Macbook Pro and started migrating from PC but the remaining time is about 70 hours long, I just wanted to know if that timing is normal and if not, does leaving running my MacBook that time can affect it?

    70 hours...  no, it's not normal but it can't hurt your Mac to be running for that amount of time.
    Try this support article > OS X Mavericks: Transfer your info from a PC

  • Hi just bought a macbook pro 13'' and I want to know if I can connect to my Wacom 12wx want to know if it is compatible and that I have to do thanks

    hi just bought a macbook pro 13'' and I want to know if I can connect to my Wacom 12wx want to know if it is compatible and that I have to do thanks

    It probably is but check with the Wacom web site.  You may need some updated drivers.
    Ciao.

  • I have just purchased a new iPad from apple and I don't know how to use it. is there somewhere that I can learn the basics

    I have just purchased a new iPad from apple and I don't know how to use it. is there somewhere that I can learn the basics

    Out of a silly curiosity, in what way did Ralph's reply solve your problem? (not that Ralph doesn't deserve recognition, mind you.)

  • I am running 10.7.5 on an imac and I want to upgrade to Yosemite but I have no app store on my computer. Is there a way I can get the app store on my imac?

    I am running 10.7.5 on an imac and I want to upgrade to Yosemite but I have no app store on my computer. Is there a way I can get the app store on my imac?

    If you don't have it then you will have to reinstall Lion:
    Reinstall Lion, Mountain Lion, Mavericks or Yosemite without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, Mavericks, or Yosemite
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it isthree times faster than wireless.
    Then you can download and install Yosemite if your computer meets the system requirements:
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite - System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

Maybe you are looking for

  • Mac Mini Late 2012 i5 Slow On Mavericks

    Hi, I am running a late 2012 i5 Mac Mini with 4gb of ram. I have had the machine since new for about 8 1/2 months. It is connected to 2 monitors and is my main machine at home. I have noticed that if I am running the machine on mountain lion it works

  • IOS IPS and Multicast

    Can a router using the IOS IPS also be enabled for multicast? Are there any limitations when doing this? Thanks,

  • Unable to install download assistant for a trial version

    I need to install a trial version of Adobe Acrobat Standard XI. It downloads the assistant but the assistant will not run or install.  I am using a Wiindows Vista OS.

  • Some keyboard shortcuts are not working

    I have found a few keyboard shortcuts that don't work, no matter what you set the shortcut to. I only found two, and they are "Show Desktop", and "Show Launchpad". I have set them to many different combinations, none of which seem to work. every once

  • Reg:Insp point Confirmation

    Hi Masters     I created a production order for a material X123 with activation of 03 Inspection type in the material master.A 03 inspection lot is created.I maintained 100-freely defined insp point in the routing of this material.         After reco