I have OS V 10.6.8, i try to download 10.7.2 but it says i need 10.7 first, i then find 10.7.1 and i get the same error

I have OS V 10.6.8, i try to download 10.7.2 but it says i need 10.7 first, i then find 10.7.1 and i get the same error

You need to purchase OS X 10.7 Lion ($29.99 from the Mac App Store)  in order to udpate to 10.7.2. 

Similar Messages

  • My iTunes will not start.  The box on the error message APSDaemon.exe,  And message says "This application failed to start because MSVC80.dll was not found.  Reinstalling may fix."  I did the reinstall and I get the same error.

    My iTunes will not start.  The box on the error message APSDaemon.exe,  And message says "This application failed to start because MSVC80.dll was not found.  Reinstalling may fix."  I did the reinstall and I get the same error.  The error first happened after I approved the an iTurns update.

    Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
    1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
    2) Restarted computer and still got error message
    3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
    4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
    5) Restarted computer.
    6) Re-installed itunes from apple website
    No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working.

  • Trying to sync my iPod with iTunes and I am getting this message:"This computer is no longer authorized to play purchased items that are on the ipod"...  I have deauthorized and reauthorized the account and still getting the same error.

    Trying to sync my iPod with iTunes and I am getting this message:"This computer is no longer authorized to play purchased items that are on the ipod"...  I have deauthorized and reauthorized the account and still getting the same error.  I have read and followed the instructions in the support article TS1389.  I do NOT have an SC info folder at /Users/Shared/ directory to delete.
    I just installed Lion yesterday, and am running iTunes 10.4.   First attempt to sync since upgrade.
    Thanks
    Dan

    Yup,
    Me too...this is stupid, stupid, stupid. Just purchased my 200 (ish) mac and now I am told that my new Mac Book pro is not "authorized".
    Which if my 200 macs are authorized. Can someone please tell me???
    I "deauthorized" my old MBP and still told I cannot use my iPhone with iTunes.
    Interesting that my old $2500 MBP, my new $3000 MBP and my $500 iPhone all cannot work cuz of some pinhead's decision to use this assorization process.
    Yes I am very, very, very mad.

  • I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved.

    I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I try to download an app, and it says that there is an error in the app , Ive tried to download other apps and i get the same error. can someone help?

    I try to download an app, and it says that there is an error in the app , Ive tried to download other apps and i get the same error. can someone help?

    You need to reinstall the App Store.
    Use Lion Recovery to do that.

  • Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.

  • HT1645 whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing.  I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

    whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing.  I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

    Welcome to the forums.
    Looks like that error message does refer to encoding (see http://support.apple.com/kb/HT1645) but a problem could be that your video has to be reloaded into iDVD if you started the encoding process and then switched settings.  You could start a new iDVD project, or try deleting encoded assets.
    Let's start from the beginning -- what length of video are you trying to fit on the DVD? (this will indicate what encoding options you have).  Double layer DVDs can be finicky and are used for video more than 2 hrs long.
    Use good quality media -- Verbatim is often recommended around here, and I've used Sony DVD-R with good results.
    For a detailed treatise, see:  https://discussions.apple.com/thread/3926901?tstart=0
    John

  • Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error ,

    Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
    This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
    (NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
    (NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
    (NAND) WMR_Start: 149 apple PNN  NAND Driver, Read / Write
    (NAND) WMR_Start: 174 FIL_INT (OK)
    (NAND) WMR_open :371 vfl_open (ok)
    (NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
    (NAND) WMR_open:420 FTL_open      (ok)
    (NAND)_publishServices:642 FTL capabilities: 0x00000001
    (NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
    (NAND)_fetchBorrowedList:881 number of borrowed blocks 16

    Hi Guys!
    I'm German, so my english writing might not be perfect
    I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
    It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
    I almost gave up, thought the Logic Board was bad.
    BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
    Long story short, on mine the front facing camera, and sensor assy were bad.
    Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
    If so, i can live without the sensor and front cam.
    Just wanted to share, good luck everyone.

  • Adobe Application Mgr fails to initialize. I've downloaded five times and still get the same error.

    Adobe Application Mgr fails to initialize. I've downloaded five times and still get the same error.

    Noelb67822514 what Adobe software or service are you trying to install?  Which operating system are you using?

  • HT4623 When trying to download the ios7 towards the end it tells me that an error occurred and quits. I have tried 5 times already and keep getting the same error code????

    When I try to download the new update iOS7 when I get to like 20 something minutes it stops and reads and error occurred and quits downloading. I have tried at least 5 times. I have plugged it in to the charger to keep the battery from dying but still the same error. Please help.

    This can happen if the server is really busy, I had to retry 4-5 times until it finally worked.  Just keep at it, you'll get there in the end, but yeah, it would be good to know what the error actually says

  • The update to OSX Mountain Lion disabled my PS4. Have tried everything on the troubleshooting list, then uninstalled and reinstalled and still getting the same error message 150:30. What can I do to get it working again???

    It has been a while since I have used it so didn't know until I had the error come up. Same with my laptop.

    There is a License Recovery script that uses Terminal.app (just enter that in Spotlight).
    It also helps to do this in a admin account or to have your account with Admin privileges.
    Now go to this link: Error 150:30, Nothing works. Help plz    and carefully follow the instructions in message 5.
    Before you enter your password, the screen should look like the example.
    Let me know how it goes.
    Gene

  • Sent folder is full, i have deleted the mesages and still get the same error, HOW DO I FIX THIS?

    I have read mozillas help question and have not been able to fix my problem, I am having the same problem with the trash folder.

    If you want to keep those messages but reduce the file size:
    Archive your Sent folder.
    How to set up Archive options - if not already set.
    * https://support.mozilla.org/en-US/kb/archived-messages
    Archive by month and year and choose to 'keep exisitng folder structure of archived messages'
    Then select the 'Sent' folder to see emails.
    click on first email to get focus.
    Press 'Ctrl' key and 'A' key to select all emails.
    They will be shown as 'conversations in the Message Pane'.
    click on the 'Archive' button.
    This should empty the Sent folder and place all sent emails in 'Archives' under the respective year, month and Sent folder.

  • Firefox crashes every time i try to use it and i get the same error message every time!

    I have a new install of firefox, and it was working fine then suddenly it started crashing. Not sure what happened. I installed Norton anti-virus, maybe that is it? Anyway here is the error message:
    Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features. I am not good with software so could you help and possibly " dummy it up" for me? lol thanks

    Get a powered USB hub.
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • "apple application support was not found" tells me to un install and re-install and ive tried it 6 times, and still get the same error

    "Error 2  (windows error 2)"

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I Just purchased Adobe Acrobat DC, Everytime I try to install I get the same Error Code: 207?

    I Just purchased Adobe Acrobat DC, Everytime I try to install I get the same Error  We've encountered the following issues, The server is not responding currently. Please try after some time (Errors  Code: 207) I've rebooted twice, and I get the same error, any immediate solutions?  I need answer now (Disabled Vet who can't physically stay online), anyone?

    I was not aware that the Administrator account was active on Win 8.1. On Win 7 it is inactive and has to be activated to use. For activation on Win 7 I always have to look it up on the web. There are just a few steps needed, but you may indeed have the Administrator account active. For the TEMP folder, you can simply empty it (often some files do not like to delete). The cleanup can be done with various software like CCleaner. You can also just go to the Windows\TEMP folder (I think this works in Win 8.1) and delete the files and folders found there (C:\Windows\Temp). Sometimes there is a temp folder under your user account that may be used for such files and that one could be cleaned too (C:\Users\Administrator\AppData\Local\Temp). I am not sure which one Adobe uses. The issue with the temp folders is that they are limited in size as I understand it. It may be someone else has a better suggestion, but if the administrator and anti-virus suggestions did not help, this is my next recommendation.

Maybe you are looking for

  • Cancel the Release for PO & PR

    Hi Once PR or PO released and follow on documents are processed then release can not be cancelled . If PR is released  and Po has created  , the PR release can not be reversed . Similarly If PO released and GR has taken for that PO then release can n

  • Multiple groups in a Matrix

    Hi, I'm trying to create a Matrix with multiple grouping. I haven't used SSRS in a few years and I'm struggling. I'm trying to show count of staff and total salary as columns grouped by contract type, business area as the rows and then make it look l

  • Problem in parsing huge XML document

    Hi, i am getting the problem when trying to parse xml doc. which contains data more then 1 lacs. using jaxp (i.e. NodeList). i get the execption outofmemory.

  • How do I set individual properties for a column in report layout at runtime

    How do I set individual properties for a column in report layout at runtime? I need to change this based on a user's input. This is for v10g. I need to change either the "Read from File" attribute or the "File Format" attribute for one column based o

  • How do I get past the iTunes screen on my new iPad? Do

    Do I have to sync to computer?