I have recently installed the new OSX Lion on my 2009 MacBook. Now I cannot get access to my Windows-Partition, which is on the harddisk. I cannot choose to boot from LION OSX or Windows. Who can help?

I have recently upgraded my MacBook to OSX Lion. Now I cannot get access to my windows-partition. I cannot choose booting from OSX Lion or Windows. Who can help???

I believe that Lion and Mountian Lion use BootCamp 4.0 and earlier versions used 3.0. I don't use BootCamp but from reading The link below you need to get new drivers, burn a cd and install. Check out #20 on this page.
http://support.apple.com/kb/HT4818#19

Similar Messages

  • I need a copy of the PDF guide for version 12 I have just installed - the link that appears in searches takes me to version 13. Where can I get the version 12 copy please?

    I need a copy of the PDF guide for version 12 I have just installed - the link that appears in searches takes me to version 13. Where can I get the version 12 copy please? (I bought the Photoshop Elements and Premiere Elements pack, but have only just installed and started to use).

    Hi,
    You can find the Help Archives at Adobe Premiere Elements Help | Archive
    Regards,
    Premiere Elements Team

  • I have recently installed the new software on my iphone 4s - Error code 1600

    Please does anybody know....
    I have just installed the new software update on my iphone 4s soon after it my phone kept turning itself off then it wouldnt come on at all so i connected it to my mac it said my iphone was in recovery mode so needed to install new software.... i waited for 10 mins roughley then at the very end it said cannot install update then it came up with - unknown error code 1600.
    Does anyone know if i can fix this from home or do i need to take it into the shop?
    Many thanks.

    You can use the iPhone version of YouTube or Jasmine
    http://itunes.apple.com/sg/app/youtube/id544007664?mt=8
    https://itunes.apple.com/sg/app/jasmine-youtube-client/id554937050?mt=8

  • I want to switch platforms with Cs6 Master Suite from Mac To PC. Who can help and explain how to get by the rope a dope perpetual circle of support

    I am trying to switch platforms from Mac to PC. I cannot get into support where this is done. Phone calls are a joke, a promise to call back in 12 or 45 minutes never happens. What you need support for seems to not exist. Can someone tell me how to get this done without getting into the rope a dope, perpetual, never ending  circle of nothing.
    EZ

    Ezez1 I am sorry you are facing difficulties with the platform swap process.  Have you been able to complete the steps listed in Order product | Platform, language swap

  • Have installed MacOsX Lion has trouble hooking up to my StoraNas server with my usual username and password, some who can help me?

    Have installed MacOsX Lion has trouble hooking up to my StoraNas server with my usual username and password, some who can help me?

    This is a common problam discussed on the Netgear forums.  I have yet to see a solution, just comments that there will need to be a fix from Netgear.  if anyone has heard of a solution or of the update being issued, please let us know.

  • I have just installed the new OSX Lion.  When opening Safari, there is now a very ugly sound.  What is it?

    I have just installed the new OSX Lion.  What is the ugly sound that I hear when I open Safari?

    See:
    *Firefox > Options/Preferences > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
    The setting in "Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
    See also:
    *https://support.mozilla.org/kb/settings-network-updates-and-encryption#w_general-tab
    *http://kb.mozillazine.org/accessibility.blockautorefresh
    *http://kb.mozillazine.org/Accessibility_features_of_Firefox
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

  • HT1338 Dear  MAC-Friends.  PLEASE HELP ME.  I am extremely afraid to do something wrong - what will be a failure so I loose all the photos I had in my iphoto library before installing the Mountain Lion.  I have just installed the MOUNTAIN-LION and now I c

    Dear  MAC-Friends.
    PLEASE HELP ME.
    I am extremely afraid to do something wrong - what will be a failure so I loose all the photos I had in my iphoto library before installing the Mountain Lion.
    I have just installed the MOUNTAIN-LION and now I can´t use my Iphoto-programme without answering the following question:
    Choose another Library ?  ( But I only want the choose the photos which one was in the old iPhoto-Library and not the other photos on the MAC-computer ? ).
    and the other possibility is:
    Create a new Libray ! Which iPhoto-library  ?
    And why create a new and to risq to loose the old photos.
    PLEASE HELP ME.
    Kind regards  FINN GRABOWSKI

    Ok. Let me first ask you, do you have any backups of your files - for example, do you use Time Machine or any other backup system?
    Next, quit iPhoto. In the Finder, go to your Pictures folder. Is there a file there called iPhoto.Library? How large is it? (If it doesn't show the size, click once on it, click cmd-I to see the information). If it's a healthy size (ie, several GB), then that should be your library, and you can double-click it to launch iPhoto. (The application will remember where your library is next time, you can just launch iPhoto normally).
    If that's not the right file, check your Trash. Is there anything in there?
    Matt

  • HT1692 Have recently installed itunes and outlook on a new computer.  Have multiple email accounts set up in Outlook tho only use contacts and calendar in relation to one of these. Cannot sync itunes with the correct contacts and calendars, Help!

    My new computer is 64-bit running Windows 7 pro, SP1 and Microsoft Office 2010 Pro Plus 32-bit
    My phone is a 4S runing iOS 6.1.3
    Very frustrated now that I have recently installed itunes and outlook on this new computer.  Everything worked perfectly ok on my laptop which was also 64-bit Windows 7 and running 32-bit Microsoft Office 2010 Pro.  I have multiple email accounts set up in Outlook tho only use contacts and calendar in relation to one of these. Cannot sync itunes with the correct contacts and calendars, when I sync the calendar and contacts are empty.  Not sure if there is any way to point itunes to particular address books and calendars.
    I have installed and uninstalled itunes 3 times and thank goodness have a backup
    Can anyone help please?
    thanks in anticipation

    I had my home computer set up to sync to work's Exchange server. It worked well, but I didn't like seeing work email messages and other programs trying to sync with my default Outlook folder, which was then the Exchange (& work related) .ost file. I know there are various ways to manage those problems using filters, view, subfolders, etc., but it was a hassle for me. I think it could work well for many other folks.
    For now, I have published my work calendar and subscribed to that calendar on my home computer. So I have view only access to my calendar on my home computer (and I can add/edit calendar items on my iPad (or Outlook Web Access) when away from work). This is not quite what I wanted, but it may work.
    It almost makes me long for the days when I used my Windows Mobile Treo to sync back and forth between exchange at work and outlook at home (but had many sync conflicts as a result).

  • Can't insert a CD/DVD into the disc drive.  Recently installed a new harddrive, and the CD/DVD drive hardware is no longer recognized. Also, with new harddrive,  OS was updated from Snow Leopard to Mt. Lion 10.8.5 on late 2007 MBP.

    Can't insert a CD/DVD into the disc drive.  Recently installed a new 1 tb hard drive, and the CD/DVD drive hardware is no longer recognized. Also, with new hard drive,  OS was updated from Snow Leopard to Mt. Lion 10.8.5 on late 2007 MBP (2.2 GHZ Intel Core 2 Duo.  4 GB 667 MHZ DDR2 SDRAM)

    Also, when I check out the hardware list, under Disc Burning - the following is reported:  No disc burning device was found. If the device is external, make sure it’s connected and turned on.
    The disc drive worked fine prior to the HD upgrade and OS update to Mt. Lion.

  • I have recently installed windows XP on my bootcamp partition. I am in need for the drivers and what not so that it will run effectivly and the bootcamp assistant canot find the "Windows Support Sofware" Can anyone help me find it manually?

    As the title has stated, I have recently installed Windows XP on my Bootcamp Partition. I am in need of the "Windows Support Software". I am assumeing that is the information that has the Drivers and what not that allow me o properly use my Mac with windows. If anyone can help me locate this inforamtion i would be greatly.... Greatfull.
    P.S. The bootcamp assistant is telling me that the Windows Support Sofware canot be found.

    You both would have had correct awnsers, but i have a Macbook that is close to three years old. And i can't seem to find my Disc. The only reason i haven't ordered a new one in case of emergencies is I plan on upgrading to the new OS in less then a month.
    I think the following may help me (In case anyone els is looking):
    http://support.apple.com/kb/DL830

  • I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy. Can any one help

    I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy and it is telling me so. Can any one help please?

    Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
    I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
    You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
    In fact there's a new one for HP at the top of the list just now.
    You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc.

  • TS3276 Does anyone know the YAHOO authentication method and port? I recently installed the new OSX 10.8.2 software and my mac mail wont work.

    Does anyone know the YAHOO authentication method and port? I recently installed the new OSX 10.8.2 software and my mac mail wont work.

    Hello,
    I have no idea what you're talking about, however my Mail stopped working when I
    had to add a new e-mail address for my Hotmail account.
    My new Hotmail address works, and seems to get e-mail from the old e-mail address,
    which from I've read behaves as a "default" address for the old address.
    Apple Mail is linked to my Hotmail account of the old e-mail address.
    I no longer know my old password.
    Apple Mail will not accept my new password for ny new Hotmail account.
    Can someone help me solve this problem WITOUT COMPLICATED SOLUTION!
    As I said I have no idea what a port, or SSL or authentication is!
    If you do answer,please answer in vert simple steps that are easy to follow, and donlt make matters worse.
    Thanks,
    SB

  • I have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx

    i have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx

    You'll need to upgrade to Parallels Desktop 7 to regain compatibility.  Good luck....
    On Edit: A minute late!

  • I have recently installed window vista on my macbook pro under lion, how do i install drivers in vista?

    Hi guys, I have recently installed window vista by using boot camp under Lion, and how do i install the drivers for vista?
    I don't have any installation disk come with this mac, therefore i have no ideas how it work?
    thanks.

    You should visit the Boot Camp forum, https://discussions.apple.com/community/windows_software/boot_camp. This issue has been asked and answered several times.
    There are no Vista/XP drivers for Lion or for the newer Apple computers.

  • I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32bit

    I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32 bit. Just looking for a workaround as this is not a primary device.

    You should update to the latest version of Snow Leopard, 10.6.8 - you can download it here; however it's still not compatible with iCloud and though you can connect to access your email you cannot access any other of iCloud's facilities.
    However some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. I've not tried it: use at your own discretion.
    To access the email:
    Entering iCloud email settings manually in Snow Leopard or Leopard
    Are you sure you can't upgrade to Lion? It requires an Intel Core 2 Duo processor, which you may well have, though it also needs 2GB RAM so you might need to add additional RAM (might not be worth it for what you want). The published specs don't mention 32 or 64 bit. You can buy Lion by ringing the Apple Store at the number at bottom left of this page.

Maybe you are looking for

  • How to find WBS-Elements of CO-DOC-Numbers

    Hi, I need to know, whether a wbs element exists for a CO doc number / CO item number, or not. I have to create an extractor to load the doc number - wbs element mapping into BI. Do someone have some R/3 table proposals? Exists a meta data repository

  • Seeburger Scenarios with xi

    Hi All, I am new to Seeburger scenarios in xi . can u any one please provide the related information. Cheers

  • Tables on SQL server not showing

    I'm connecting to an SQL database hosted online; I have created many tables (the owner is usr1234) and created the DSN in DWMX2004. DW is connecting to the database but I can see only tables owned by dbo. I can't see all the other tables. What am I d

  • Copy Controls - Sales Area

    Hi Good Afternoon, I am working on implementation for Realtor's. Issue is Here we crate an Quotation with reference to Enquiry. At the time creating Quotation is there any option to change the customer sales area? Is it fit Standard Copy Controls or

  • Doubt regarding Date Comparison

    Hello, i am facing a problem in date comparison SELECT max(l.id) FROM irf_bill_details l WHERE to_char(l.agreement_id) = '508814' AND l.billing_client_id = 'BHPIF' AND extract(YEAR FROM l.bill_date) < extract(YEAR FROM to_date('01-Jan-2010', 'dd-Mon-