I have to concentrate till 8 RS232 interfaces of electronic devices and to transmit these by radio( 2,4GHz) to a main point.

The network topology must by point-to-multipoint and addressed multi-drop to give the possibility to interrogate each electronic device.
The communication path, from the main computer to electronic device, must be transparent for the customer application.
Attachments:
NI.doc ‏33 KB

Hi,
I looked at your description and topology and I think you can easily accomplish what you described there with a regular radio (it could be the one you mention) and multiple 485/232 converters.
This converters will convert to a single 232 port and even though you have multiple converters (as opposed to the multiple ports you described) you will still have the multi-point to single point architecture.
I can assure you that the FP-100x are not the best option for you in this case and unfortunatelly we at NI do not have a 485/232 converter to offer, but I am sure you can find them in the market for a very low price.
I hope it helps
Best Regards
Andre Oliveira

Similar Messages

  • I  have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7  PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

    I  have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7  PC. For several years,
    I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation.  All other synchronisation areas (eg Contacts, Notes etc) work fine.
    I have looked for help through the Apple Support Community and tried many things.  I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
    What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from  my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether.  I need to have a properly synchronising calendar on my phone.  Do you have any suggestions?

    In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery.   (from memory, so exact wording may be off)
     The lower the numbers you use there, the longer the battery *should* last.    These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
    --- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

  • I have a big problem. I lost my other device, and Sync doesn't recognize my Recover Key, even if I generate a new one. What to do? I have all my bookmarks there

    ''dupe of https://support.mozilla.org/en-US/questions/934696 - locking''
    The Sync doesn't recognize my Recovery Key ("Wrong Recovery Key") even if I generate a new one. What to do?

    If you have generated a new Recovery Key, then unfortunately the account data that you had before is gone (Sync will wipe all data before creating a new key to ensure it stays secure). So unfortunately at this point, unless you have a backup of your data somewhere, it is inacessible.
    [[I've lost my Firefox Sync account information - What to do]]

  • My iMessage is connected to an itouch that I no longer have. How can I remove it from that device and add it to my iphone?

    Previously, my iMessage was connected to an itouch which I no longer have. How do I add my iMessage account to my iphone when the system tells me it is already in use?

    The problem with those two apps is that they are supposed to be in your Apple ID and you didn't set up the Mac properly/completely when you got it.
    You might try deleteing them and using OS X Recovery to install them again.
    OS X Recovery -
    http://support.apple.com/kb/HT4718
    After that, before you open any iLife apps go to your Mac App Store account, to the Purchased pane and Accept them into your account.

  • How to control RS232 Interface through LABView?

    Does LABView have the ability to control RS232 Interface? If it does, what version of LABView has this capability? The LABView versions that we have in the company are 7.2 and 8.1 only. The operating systems that we have are Windows and Linux.

    i have a question i am wanting to control an rfid reader/writer that has a  RS232 or USB connection through labview. Here are some specs on the product. is this possible for it to work.
    Key Features
     Fast data transfer
     Supports multi-detection
     ANT1015A for wall or desktop 
    mounting
     Baud rate: 19,200bps, N, 8, 1
     ABS housing
     RS232 or USB connection
     IP40 protection rating: waterproof 
    and dustproof
    Technical Specifications
    Frequency 13.56MHz
    Technical certificates CE, FCC
    Power requirements 12V DC, 300mA 
    Display 3 status LEDs
    Read/write distance 30cm, with ISO 15693 compliant transponders
    Technical Certificates CE, FCC 
    Antenna connection RP-SMA 50ohm
    Transponder compatibility HF, ISO 15693 compliant transponders
    Operating temperature 0 to 60°C
    Storage temperature -20°C to 70°C
    Humidity 10% to 90% relative
    Dimensions 345mm × 240mm × 20mm (L ×  W × H)
    The link below will take you directly to the product.
    Hf Rfid
    Attachments:
    13.56 MHz. High Frequency (HF) Reader RFID Writer with Antenna.pdf ‏389 KB

  • ISA-95/B2MML centric interface between Oracle ERP and MES

    Hi :
    A customer wants to know if we have any ISA-95/B2MML centric interface between Oracle ERP and Microsoft Exchange Server. Specifically, they are interested in learning about compliance to OPC UA standards in such integration.
    Please reply if anybody has any information. Your help will be greatly appreciated!
    Thanks and Best Regards,
    Harris

    Hello,
    I guess this is not the right forum to address this query. Please post this question in some E-Business Suite related forum..
    Let me know.
    Rgds,Ramesh

  • Why have apple made such a great item in the ipad2, and then just ruined it by air print, I have a Kodak wireless, and I am not paying stupid ink prices, the cost of air printers is huge, and the ink worse, why have they ruined a good item.

    AirPrint,,,, WHy?      Why have apple robbed us yet again, AirPrint, is useless, or buy another printer that apple have gained massive revenue from, the iPads are great but very high priced, and then you have to buy another high priced printer with high priced inks, I use a wifi Kodak, why should I buy another.
    You have to mess about with other apps and then have your other computer on, what's all that about Apple. Why have they ruined a really good thing.
    I cannot get my printer to work, and might just sell this stupid gadget, I am so annoyed at apple playing god with things, if you want it to work you have to jailbreak it, and the up pos Apple again, if you break it we will not repair it, that tells you exactly that they are playing god, wake up apple and smell the coffee.

    I have a Kodak wifi printer and print using the app Print Magic.  I do not need to have any of my home computers on to do this as they have nothing to do with wifi printing from my iOS devices (if you do not have a wifi printer and are sharing the printer off another computer, then of course, that computer needs to be on and connected to your wifi network).
    You can post with all the hyperbole you want, but none of us have any inside information as to why Apple's devices and iOS do certain things a certain way, or why they do not do things in the particular specific way you wish them to.  Airprint does not work with Kodak printers at this time.  There are numerous apps that will allow you to print to just about any wifi printer.

  • My daughter and I both have iPhone 4s'.   Last night she switched to ios7 and I am still using ios6.  I use the find my iPhone app to keep track of her and since the update it no longer works.  Her phone says its on. ???

    My daughter and I both have iPhone 4s'.   Last night she switched to ios7 and I am still using ios6.  I use the find my iPhone app to keep track of her and since the update it no longer works.  Her phone says its on but when I try and locate it from either my phone or laptop it shows it offline.  Any suggestions.  It's my only peace of mind! Thanks!

    Does she have her own iCloud account?  You can have more than one iCloud account installed on a device, and some users install a secondary iCloud account which is common to others in the family to allow "Find My iPhone" to be used from one account while keeping separate iCloud contacts, mail, etc.
    But with iOS 7 although you can still have multiple iCloud accounts installed, only the "primary" iCloud account supports "Find my iPhone".  So if her iCloud account is the primary, you can no longer track her from your iCloud account.  Is that what happened in your case?

  • Have TC green light. It won't update firmware and I'm not coneected to the internet. I can, however, connect with ethernet direct to Imac

    I have a grren light on TC but the firmware update fails because I'm not connected to the net. I have the ethernet cable from my Charter cable modem connected to TC and trying to connect automatically but it's not working. Can anyone help?

    Have you performed a full modem reset on your device and network power cycle?
    If not, please try the following:
    Push the reset button on the modem and then power it off
    Pull the battery if its easily accessible
    Power down everything else on your network
    Wait at least 15 minutes, 30 would be better,  60 even better.
    Power up the modem first and let it run by itself for a few moments
    Start the next device connected to the modem, probably your Time Capsule, the same way
    Start each device the same way until all network devices are back up
    If your modem is functioning corrrectly, and you have the TC configured correctly, you will be connected to the Internet.

  • Read data of sartorius scales with RS232 interface

    Dear users,
    I have to use a Sartorius scales with a RS232 interface.
    In the attachment you see the program with which I try to read the data of this device – so far not successfully.
    Therefore I have several questions:
    Could somebody tell me if the structure of my program is correct? I think so, because I saw that other people created similar code. But I am not totally sure about this.
    To read data of the scales, I have to send a print control to the device. In the manual of the device is written that the print command is as in the attached picture. They mention that ESC = Escape, CR = Carriage return, LF = Line feed.
    So, how do I write this command correctly? Do I have to write in a string ESCPCRLF, or ESC P CR LR or ESC,P,CR,LF, or…? I am really totally lost here because I have never worked with such an interface so far.
    I do not have a RS232 interface on my computer, so I use an USB to serial adapter. Do I have to adapt the baud rate etc. of my adapter in the windows device manager to the values of my scales?
    When I run my program, the number of bytes at serial port is always 0. Could this be that I use next to my USB to serial adapter another adaptor to connect the 9-pin USB connector to the 25-pin connection of my scales - perhaps a connection is wrong?
    I really would appreciate your help much!!
    Attachments:
    ScalesLV2010.vi ‏18 KB
    ScalesLV2013.vi ‏21 KB
    PrintCommand.png ‏5 KB

    partial wrote:
    Thank you for your reply.
    Searching for drivers was one of the first steps I did. But unfortunately my device is so old (about 25 years) that there is no driver. I also tried to work with the programs of the LabVIEW LLB which are available from your link, but there I also get the 1073807339 error code.
    Checking the cabling is for sure a good idea. So far it seems to be fine.
    Thank you for your hint that the use of delays and the Bytes at Serial Port is incorrect.
    But why is Bytes at Port then mentioned in this NI-document:
    http://digital.ni.com/public.nsf/allkb/874B379E24C0A0D686256FCF007A6EA0
    There they also mention the delay which should be used for older instruments. Since my device is about 25 years old, I thought that the use of wait is a good idea.
    But perhaps you are right. So, could you please correct my program then? As I mentioned, I have never worked so far with the RS232 interface, so I really would be glad if somebody corrects my code.
    Unfortunately, what NI doesn't tell you is that "Bytes at Serial Port" is a last resort, to be used only if you have no other way to figure out if a device has completed sending data.  Since you have a marker - the line feed termination character - I would configure the VISA serial port to use it, and then discard the white space (the CR) at the end.  That way you read exactly the data and don't have to insert a wait to make sure everything was read.
    IMHO - If you have to insert a "wait" in between commands, you probably don't fully understand how to communicate with the equipment.  Of course, I have worked with power supplies that are so "dumb" that the programming guide says that you have to wait x milliseconds for a command to process! 
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • Accessing Newport ESP 300 Controller with RS232 Interface

    I am trying to access Newport ESP 300 Controller with RS232 interface. My goal is to read Newports collected data with LabView using RS232 Interface. Are there Vi's ore any support available? thank you.

    Hi
    we have built some routines for this machine
    LabVIEW 6.1
    are you interested?
    greetings from the Netherlands

  • How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

    how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

    If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
    The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
    plications has shown that a good manual is your best friend.
    Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
    Jeremy

  • Controlling 1906 Digital Multimeter(TTi) using ARC Rs232 interface

    Hello All,
    I want to control  1906 Digital Multimeter by Thurlby Thandar Instruments (TTi) ,using its ARC Rs232 interface.I have downloaded driver from the http://tti1.co.uk/registered_users/downloads/drivers-download.htm  but the problem is that this driver seems to be designed for labwindows and for GPIB interface.I want to control it using labview and  Serial (ARC Rs232 ) interface.
    i need advice for the solution.
    Regards
    Shahzad

    Shahzad,
     To create LabVIEW VIs for LabWindows/CVI instrument drivers, use the LabVIEW Instrument Driver Import Wizard.
    NI has an Instrument Driver Network which provides a host of Instrument Drivers, which also included the TTi 1906 CVI/LabWindows driver, if you are looking to interface any other instruments with LabVIEW I would recommend checking here first.
    Hope that helps!
    -Marshall R
    Applications Engineering

  • I have a 2010 macbook pro running OSX 10.6.8 and I would like to interface my macbook to a HD tv. I purchased a interface cable but cannot seem to communicate with the TV. Do you have any instructions or tips that I can use to accomplish this task? Do I

    I have a 2010 macbook pro running osx 10.6.8 and would like to interface my mac to my HD tv. Are any instructions available to reliably make this connection and if so what is needed on my part. Is the software compatible or do I have to upgrade to a later version OS. Thank You,
    Gene

    I purchased a mini to HDMI cable and tried to connect to the TV but the TV is not recognizing the computer. I attempted to set sound and display settings under the "my Preferences" utility with no success.  Again, I'm not sure if I need to upgrade my OS software Any Suggestions?

  • I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help

    I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help . I have tried to reset even by pressing sleep and home button but it could not help. Please suggest. Still i have connected for charging .

    Sounds like you have corrupt backup data, if this occurs from one phone to another. Try restoring the phone as a new device, without a backup. Try using for a day before installing any other apps, etc. See if that improves the battery life. Then try syncing back applications a couple at a time. Something seems to be locking in the processor which is draining the battery.
    Do you live in an area where there are Apple Stores? If so, try making an appointment with the Genius Bar to have the device checked out.

Maybe you are looking for