I have two problems. One with LTE and another with iCloud terms and conditions.

I haven't had some of the bigger problems with the 6 as some. But I am having two issues that are getting annoying. One is a pop up every 5-10 minutes that says I cannot use icloud without accepting terms and conditions. However it won't let me accept any. The other is lte is not working on my phone, but is fine with my husbands. Any ideas? Thanks!

klawson88 wrote:
I have 3 classes fully defined: GameWindow(extends JFrame...parameter: FileLoader f) NumberOfPlayersDialog (extends JDialog and implements ActionListener...parameter: GameWindow g), PlayerRollDialog(extends JDialog and implements ActionListener...parameters: GameWindow g and NumberOfPlayersDialog n).Word of advice: avoid having your GUI classes implement Listener interfaces as this makes for the creation of [low cohesion classes,|http://en.wikipedia.org/wiki/Cohesion_%28computer_science%29] and this is a "Bad Thing".
PlayerRollDialog has one button that has an action listener. The user rolls dice for several player objects by pressing the button and the result (which player object has the highest roll) is displayed on the screen. At that point, the button text changes to "Start Game!". What I WANT to do is have a subsequent click on the button close the dialog (to reveal the gameWin underneath). Is it possible to do this? Wouldn't this require two actionPerformed for one event? No, you could do this with a single ActionListener. You will change the button's text and possibly its actionCommand String. Simply query the button for its text and perform the appropriate action based on this.
How can I implement a second actionPerformed for the same event?Again, you don't need to do this.
My second problem is that I want to be able to close the entire program if the user exits out of either dialog without performing an action (clicking on the X button). I try specifying EXIT_ON_CLOSE as their default close operations, but it can't compile. It gives me:Yeah, you can't do that. You can give the classes that hold the dialog a state, say exitOK, and initialize it to false. If the proper buttons were pressed you would change exitOK to true. Then after the dialogs have closed you could then use a public getter, isExitOK(), to check this state and then have your GUI behave accordingly. These dialogs are model, correct?

Similar Messages

I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other. We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this

I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other.
We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this domain and working properly.
now i am trying join the Mumbai location PC with my Domain(CAPLDC) but they are not join with my DC and generate the error.
I have chek the DNS and nslookup all are correct but this is generate error.
Is this possible Mumbai location join with this Domain(CAPLDC)???
One more thing when i have created another DC with this name (papldc.com) then Mumbai location is joined properly.
Pls find the error message below and also find the attachment.
Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
The domain name "capldc" might be a NetBIOS domain name. If this is the case, verify that the domain name is properly registered with WINS.
If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "capldc":
The query was for the SRV record for _ldap._tcp.dc._msdcs.capldc
The following domain controllers were identified by the query:
capldcserver.capldc
win-dyfq2poc88q.capldc
However no domain controllers could be contacted.
Common causes of this error include:
- Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses.
- Domain controllers registered in DNS are not connected to the network or are not running.
Pankaj Kumar

Why are you using a single labeled domain? I would recommend renaming the domain name to be something like domain.com.
Please refer to the articles below to fix your current issue:
http://www.wincert.net/tips/networking/1614-cant-join-pc-to-a-domain-with-single-label.html
http://www.itgeared.com/articles/1128-using-single-label-dns-names-for-active/
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

I am getting a 6 soon. But need to back up my 4S. I have two problems: one, I cannot get the rest of the videos off my phone. two, I have no plus or edit button in contacts and cannot delete or fix and bad numbers. Help

Actually, I have three problems. I had to turn off iCloud because every time I turn it on, it wipes out all my contacts. Thankfully they're on my macbook and I was able to text them back to the phone. Honestly, this is making me batty. All I want to do is preserve my information before the new phone comes in. I did do a back-up to iTunes, but will that bring all the problems over to the new phone?!?
First? I tried to edit a contact today. No edit button. Then I thought, I'll just add her. No plus sign.
Last but not least? I have a LOT of memory being taken up on my 16 G 4s with videos that iTunes and iPhoto refuse to see. I can't even figure out how to see the folder on my iPhone when it's plugged in.
Help!

lisab101,
We appreciate you reaching out to us. We greatly appreciate the feedback that you have provided us. Please know that we will lift this up to management and the issues will be addressed.
Thank you,
RobinD_VZW
Follow us on twitter @VZWSupport

I have a problem, my wife has an ipad with photos , emails etc etc, she has recently got herself a new iPad Air, has now been using that for two or more months, more photos (new) more emails and other stuff. Will send next query as running out of room to

I have a problem, my wife has an ipad with photos , emails etc etc, she has recently got herself a new iPad Air, has now been using that for two or more months, more photos (new) more emails and other stuff. What she wants to do is get all she wants from ipad 1 to new ipad without finishing up with 2 of everything which happen on previous occasion. I realise that she needs to tidy up ipad 1 first and get rid of thousands of emails etc. I need help.
Thanks kiwihdrider

Hi yes that works well when the new ipad hasn't been used. Trouble new one has been used for two months or more, has lots photos email etc etc. I am worried that these will go. When we did iPhone thru same process finished up with two of most things pics and emails. The emails alone were over 2 thousand and wife reluctant to delete them all. I would and just sort pics. Any other ideas
Ta

We have two iPhones, one iMac, and one iTunes account. Can someone tell me an yeast way to manage each iPhone separately- that is -- when we connect each iPhone how do we keep our contacts separated? this is a real problem. Thanks

We have two iphones , one imac , and one itunes account. Hope someone can tell me an easy way to synch each iphone so that our contacts stay separate. I would like to share itunes music etc but not synch the same contacts to each phone...major problem... Thanks!

You have a few options which are detailed here:
http://support.apple.com/kb/ht1495

I have two pc, one with windows 7 professional and another with windows 8.1. I'm the only owner and user of both. One works with 32 bits and the other (windows 8.1) , 64 bits. Can I use acrobat standard XI in both pc's being the only usuary?

Just in case. I have two pc's one with windows 7 professional (32 bits) and another with windows 8.1 (64 bits). Can I use, with one license, as I'm the owner and only user, acrobat standard XI?. Thank you in advance
Francisco

Yes, the license allows 2 installs for the owner's personal use. You can check this in the license agreement if you wish.

I have two problems. The first one: when I conect my iphone 5 on the pc appears "-42110" and the version of itunes is the last one. The second is that I am not conectin itunes store fron the iphone appears"couldn´t conect to itunes store". I need help. Tk

I have two problems. The first one: when I conect my iphone 5 on the pc appears "-42110" and the version of itunes is the last one. The second is that I am not conectin itunes store fron the iphone appears"couldn´t conect to itunes store". I need help. Tk

First problem first
As your iTunes is up to date, remove the SC Info folder.

I have two phones, one (4S) with Bell in Canada, the other (5, soon enough) with ATT in the US. Since I spend more time in Canada, I'd rather the 5 up there. Can I swap the sim cards? Neither phone is unlocked.

I have two phones, one (4S) with Bell in Canada, the other (5, soon enough) with ATT in the US. Since I spend more time in Canada, I'd rather the 5 up there. Can I swap the sim cards? Neither phone is unlocked.

iphone 5 will use nanosim instead of microsim so that one won't work
you could check you with carrier to see if they will give you another sim though but I dunno if the ATT 5 will have the right data bands so you might not get LTE or w/e

I have two problems with my 2012 13" MacBook Pro. 1. Gray screen shows at startup 2. Randomly disconnects from network. Any help will be greatly appreciated.

I have two problems with my 2012 13” MacBook Pro.
Gray screen shows at startup
Randomly disconnects from network.
Any help will be greatly appreciated.

First, open Terminal in your Utilities folder and paste this into the prompt line:
sudo update_dyld_shared_cache
Press RETURN. You will be prompted to enter your admin password which will not be echoed to the screen. Press RETURN again.
Next, boot the computer into Safe Mode.
Next, do the following:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Have two users one is a test one is mine all the sudden mine lost the applications folder and now when i open my user it opens but wont respond to anything and i have to power it down and restart any clues

I have two users one is mine, one is a test i set up with apple care. Everything was working fine then i lost my applications folder icon on my user. I have been using the Finder to open applications, now when i open my user the mouse travels but i'm not able to get a respond from anything ,it's almost like its frozen. I have power off and restart and use the test user. Anyone have a clue or any ideas?

You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive.
You can also boot into Safe mode
To start up into Safe Mode (to "Safe Boot"), do this:
   1. Be sure the computer is shut down.
   2. Press the power button.
   3. Immediately after you hear the startup tone, press and hold the Shift key.
      Tip: The Shift key should be held as soon as possible after the startup tone but not before.
   4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
Please post back with results,
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

I have a problem mackeeper keep opening up another tab and these little green circle stuff keep popping up on the page and overtime my cursor hover over it it pops up a little box with stuff in it does anyone have an idea how to get rid of it?

i have a problem mackeeper keep opening up another tab and these little green circle stuff keep popping up on the page and overtime my cursor hover over it it pops up a little box with stuff in it does anyone have an idea how to get rid of it?

You installed a variant of the "VSearch" trojan. Remove it as follows.
This malware has many variants. Anyone else finding this comment should not expect it to be applicable.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.2c232f1e4d12129e.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.2c232f1e4d12129e.daemon.plist
/Library/LaunchDaemons/com.2c232f1e4d12129e.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/2c232f1e4d12129e
/System/Library/Frameworks/v.framework
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

I have two macbooks, one is my old one which my wife uses and my macbook pro. When either of us make changes in Safari it changes it on the other's computer...please help.

I have two macbooks, one is my old one which my wife uses and my macbook pro. When either of us make changes in Safari it changes it on the other's computer...please help.

You're both synchronizing Safari with iCloud while signed in with the same Apple ID. On one computer, sign out of iCloud in its preference pane and sign in with a different ID.

I have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

I have two iPhones, one is a 4s and the other is a 3g. I have not used my 3g in some time now. I recently restored it but I cannot use it without a sim card, it says i have to "activate it."

I have two iPhones, one is a 4s and the other is a 3g. I have not used my 3g in some time now. I recently restored it but I cannot use it without a sim card, it says i have to "activate it." I cannot place my iPhone 4s sim card in it (too small), and i do not want to get a new contract or sim card for an iPhone that i do not ues very much.

Thanks for your help, but i cannot borrow a noral sim card now, my family has all up graded to iPhone 4s's, i have done this before, but one of my family had the same type of iphone so i could use theirs. Now i am the only one who still holds on to their old phone... I am not sure about buying an adapter...

I have two computers one 10.5.8 one 10.6.8. Updated the 10.6.8 and now my mail has disappeared on one computer - do I sync account to get all my mail content back?

I have two computers one IMac 10.5.8 one MacBookPro 10.6.8. Updated the MacBookPro 10.6.8 and now my mail has disappeared on that computer - do I sync account to get all my mail content back onto the MacBookPro?

You can do it. This article from Macworld will be helpful to you:
http://www.macworld.com/article/161087/2011/07/install_lion_over_leopard.html
I recommend the "brute-force" method.
Just make sure you have your data backed up properly!

I have two iphones one older iphone4 and one newer iphone5. I want to set the iphone4 as an Airplay receiver and the other iphone 5 as the sender. do you know if this is possible?

I have two iphones one older iphone4 and one newer iphone5. I want to set the iphone4 as an Airplay receiver and the other iphone 5 as the sender. do you know if this is possible?

Sorry. Apple's policy states that accounts cannot be merged > Frequently asked questions about Apple ID
Contact Apple for assistance > Contacting Apple for support and service

I have two problems. One with LTE and another with iCloud terms and conditions.

Similar Messages

Maybe you are looking for